##############################################################################
##############################################################################
###
### Running command:
###
###   /home/biocbuild/bbs-3.17-bioc/R/bin/R CMD check --install=check:VariantTools.install-out.txt --library=/home/biocbuild/bbs-3.17-bioc/R/site-library --timings VariantTools_1.42.0.tar.gz
###
##############################################################################
##############################################################################


* using log directory ‘/home/biocbuild/bbs-3.17-bioc/meat/VariantTools.Rcheck’
* using R version 4.3.1 (2023-06-16)
* using platform: x86_64-pc-linux-gnu (64-bit)
* R was compiled by
    gcc (Ubuntu 11.3.0-1ubuntu1~22.04.1) 11.3.0
    GNU Fortran (Ubuntu 11.3.0-1ubuntu1~22.04.1) 11.3.0
* running under: Ubuntu 22.04.3 LTS
* using session charset: UTF-8
* checking for file ‘VariantTools/DESCRIPTION’ ... OK
* checking extension type ... Package
* this is package ‘VariantTools’ version ‘1.42.0’
* checking package namespace information ... OK
* checking package dependencies ... OK
* checking if this is a source package ... OK
* checking if there is a namespace ... OK
* checking for hidden files and directories ... NOTE
Found the following hidden files and directories:
  .BBSoptions
These were most likely included in error. See section ‘Package
structure’ in the ‘Writing R Extensions’ manual.
* checking for portable file names ... OK
* checking for sufficient/correct file permissions ... OK
* checking whether package ‘VariantTools’ can be installed ... OK
* checking installed package size ... NOTE
  installed size is  6.5Mb
  sub-directories of 1Mb or more:
    doc   5.4Mb
* checking package directory ... OK
* checking ‘build’ directory ... OK
* checking DESCRIPTION meta-information ... OK
* checking top-level files ... OK
* checking for left-over files ... OK
* checking index information ... OK
* checking package subdirectories ... NOTE
Problems with news in ‘NEWS’:
  Cannot process chunk/lines:
    Initial release
    (start date: 12 September, 2012)
* checking R files for non-ASCII characters ... OK
* checking R files for syntax errors ... OK
* checking whether the package can be loaded ... OK
* checking whether the package can be loaded with stated dependencies ... OK
* checking whether the package can be unloaded cleanly ... OK
* checking whether the namespace can be loaded with stated dependencies ... OK
* checking whether the namespace can be unloaded cleanly ... OK
* checking loading without being on the library search path ... OK
* checking dependencies in R code ... WARNING
Missing or unexported object: ‘GenomicRanges::genome’
Unexported objects imported by ':::' calls:
  ‘BiocGenerics:::testPackage’ ‘IRanges:::unlist_as_integer’
  See the note in ?`:::` about the use of this operator.
* checking S3 generic/method consistency ... OK
* checking replacement functions ... OK
* checking foreign function calls ... OK
* checking R code for possible problems ... NOTE
LowerFrequencyInOtherFilter : <anonymous>: no visible binding for
  global variable ‘control.alt.depth’
LowerFrequencyInOtherFilter : <anonymous>: no visible binding for
  global variable ‘control.total.depth’
ReadPositionTTestFilter : <anonymous>: no visible binding for global
  variable ‘read.pos.mean’
ReadPositionTTestFilter : <anonymous>: no visible binding for global
  variable ‘read.pos.mean.ref’
ReadPositionTTestFilter : <anonymous>: no visible binding for global
  variable ‘read.pos.var’
ReadPositionTTestFilter : <anonymous>: no visible binding for global
  variable ‘read.pos.var.ref’
ReadPositionTTestFilter : <anonymous>: no visible global function
  definition for ‘rawDepth’
StrandFETFilter : <anonymous>: no visible binding for global variable
  ‘count.plus.ref’
StrandFETFilter : <anonymous>: no visible binding for global variable
  ‘count.minus.ref’
StrandFETFilter : <anonymous>: no visible binding for global variable
  ‘count.plus’
StrandFETFilter : <anonymous>: no visible binding for global variable
  ‘count.minus’
calculateConcordanceMatrix: no visible binding for global variable ‘x’
caseControlFET: no visible binding for global variable
  ‘control.alt.depth’
caseControlFET: no visible binding for global variable
  ‘control.total.depth’
variantGR2Vcf: no visible global function definition for
  ‘variantGRangesIsDeprecated’
variantGR2Vcf: no visible global function definition for
  ‘makeVRangesFromVariantGRanges’
callVariants,GenomicRanges: no visible global function definition for
  ‘variantGRangesIsDeprecated’
callVariants,GenomicRanges: no visible global function definition for
  ‘variantGRangesToVRanges’
Undefined global functions or variables:
  control.alt.depth control.total.depth count.minus count.minus.ref
  count.plus count.plus.ref makeVRangesFromVariantGRanges rawDepth
  read.pos.mean read.pos.mean.ref read.pos.var read.pos.var.ref
  variantGRangesIsDeprecated variantGRangesToVRanges x
* checking Rd files ... WARNING
./man/tallyVariants.Rd: non-ASCII input and no declared encoding
problem found in ‘tallyVariants.Rd’
* checking Rd metadata ... OK
* checking Rd cross-references ... OK
* checking for missing documentation entries ... OK
* checking for code/documentation mismatches ... OK
* checking Rd \usage sections ... OK
* checking Rd contents ... OK
* checking for unstated dependencies in examples ... OK
* checking contents of ‘data’ directory ... OK
* checking data for non-ASCII characters ... OK
* checking data for ASCII and uncompressed saves ... OK
* checking installed files from ‘inst/doc’ ... NOTE
The following directories should probably not be installed:
  ‘fig’

Consider the use of a .Rinstignore file: see ‘Writing R Extensions’,
or move the vignette sources from ‘inst/doc’ to ‘vignettes’.
* checking files in ‘vignettes’ ... OK
* checking examples ... ERROR
Running examples in ‘VariantTools-Ex.R’ failed
The error most likely occurred in:

> base::assign(".ptime", proc.time(), pos = "CheckExEnv")
> ### Name: callSampleSpecificVariants
> ### Title: Call Sample-Specific Variants
> ### Aliases: callSampleSpecificVariants
> ###   callSampleSpecificVariants,BamFile,BamFile-method
> ###   callSampleSpecificVariants,character,character-method
> ###   callSampleSpecificVariants,GenomicRanges,GenomicRanges-method
> ###   callSampleSpecificVariants,VRanges,VRanges-method
> ###   SampleSpecificVariantFilters
> 
> ### ** Examples
> 
> bams <- LungCancerLines::LungCancerBamFiles()
> if (requireNamespace("gmapR", quietly=TRUE)) {
+     tally.param <- TallyVariantsParam(gmapR::TP53Genome(), 
+                                       high_base_quality = 23L,
+                                       which = gmapR::TP53Which())
+     callSampleSpecificVariants(bams$H1993, bams$H2073, tally.param)
+ } else {
+     data(vignette)
+     calling.filters <- VariantCallingFilters(read.count = 3L)
+     called.variants <- callVariants(tallies_H1993, calling.filters)
+     callSampleSpecificVariants(called.variants, tallies_H2073,
+                                coverage_H2073)
+ }
Error in packageVersion("TxDb.Hsapiens.UCSC.hg19.knownGene") : 
  there is no package called ‘TxDb.Hsapiens.UCSC.hg19.knownGene’
Calls: TallyVariantsParam ... GeneGenome -> geneGenomeName -> paste0 -> packageVersion
Execution halted
* checking for unstated dependencies in ‘tests’ ... OK
* checking tests ...
  Running ‘VariantTools_unit_tests.R’
 OK
* checking for unstated dependencies in vignettes ... OK
* checking package vignettes in ‘inst/doc’ ... OK
* checking running R code from vignettes ...
  ‘VariantTools.Rnw’... failed
 WARNING
Errors in running code in vignettes:
when running code in ‘VariantTools.Rnw’
  ...

> bam <- bams$H1993

> if (requireNamespace("gmapR", quietly = TRUE)) {
+     p53 <- gmapR:::exonsOnTP53Genome("TP53")
+     tally.param <- TallyVariantsParam(gmapR::TP53G .... [TRUNCATED] 

  When sourcing ‘VariantTools.R’:
Error: there is no package called ‘TxDb.Hsapiens.UCSC.hg19.knownGene’
Execution halted

* checking re-building of vignette outputs ... NOTE
Error(s) in re-building vignettes:
--- re-building ‘VariantTools.Rnw’ using Sweave
Loading required package: S4Vectors
Loading required package: stats4
Loading required package: BiocGenerics

Attaching package: ‘BiocGenerics’

The following objects are masked from ‘package:stats’:

    IQR, mad, sd, var, xtabs

The following objects are masked from ‘package:base’:

    Filter, Find, Map, Position, Reduce, anyDuplicated, aperm,
    append, as.data.frame, basename, cbind, colnames, dirname,
    do.call, duplicated, eval, evalq, get, grep, grepl,
    intersect, is.unsorted, lapply, mapply, match, mget, order,
    paste, pmax, pmax.int, pmin, pmin.int, rank, rbind,
    rownames, sapply, setdiff, sort, table, tapply, union,
    unique, unsplit, which.max, which.min


Attaching package: ‘S4Vectors’

The following object is masked from ‘package:utils’:

    findMatches

The following objects are masked from ‘package:base’:

    I, expand.grid, unname

Loading required package: IRanges
Loading required package: GenomicRanges
Loading required package: GenomeInfoDb
Loading required package: VariantAnnotation
Loading required package: MatrixGenerics
Loading required package: matrixStats

Attaching package: ‘MatrixGenerics’

The following objects are masked from ‘package:matrixStats’:

    colAlls, colAnyNAs, colAnys, colAvgsPerRowSet, colCollapse,
    colCounts, colCummaxs, colCummins, colCumprods, colCumsums,
    colDiffs, colIQRDiffs, colIQRs, colLogSumExps, colMadDiffs,
    colMads, colMaxs, colMeans2, colMedians, colMins,
    colOrderStats, colProds, colQuantiles, colRanges, colRanks,
    colSdDiffs, colSds, colSums2, colTabulates, colVarDiffs,
    colVars, colWeightedMads, colWeightedMeans,
    colWeightedMedians, colWeightedSds, colWeightedVars,
    rowAlls, rowAnyNAs, rowAnys, rowAvgsPerColSet, rowCollapse,
    rowCounts, rowCummaxs, rowCummins, rowCumprods, rowCumsums,
    rowDiffs, rowIQRDiffs, rowIQRs, rowLogSumExps, rowMadDiffs,
    rowMads, rowMaxs, rowMeans2, rowMedians, rowMins,
    rowOrderStats, rowProds, rowQuantiles, rowRanges, rowRanks,
    rowSdDiffs, rowSds, rowSums2, rowTabulates, rowVarDiffs,
    rowVars, rowWeightedMads, rowWeightedMeans,
    rowWeightedMedians, rowWeightedSds, rowWeightedVars

Loading required package: SummarizedExperiment
Loading required package: Biobase
Welcome to Bioconductor

    Vignettes contain introductory material; view with
    'browseVignettes()'. To cite Bioconductor, see
    'citation("Biobase")', and for packages
    'citation("pkgname")'.


Attaching package: ‘Biobase’

The following object is masked from ‘package:MatrixGenerics’:

    rowMedians

The following objects are masked from ‘package:matrixStats’:

    anyMissing, rowMedians

Loading required package: Rsamtools
Loading required package: Biostrings
Loading required package: XVector

Attaching package: ‘Biostrings’

The following object is masked from ‘package:base’:

    strsplit


Attaching package: ‘VariantAnnotation’

The following object is masked from ‘package:base’:

    tabulate


Error: processing vignette 'VariantTools.Rnw' failed with diagnostics:
 chunk 2 (label = callVariants) 
Error in loadNamespace(x) : 
  there is no package called ‘TxDb.Hsapiens.UCSC.hg19.knownGene’

--- failed re-building ‘VariantTools.Rnw’

SUMMARY: processing the following file failed:
  ‘VariantTools.Rnw’

Error: Vignette re-building failed.
Execution halted

* checking PDF version of manual ... OK
* DONE

Status: 1 ERROR, 3 WARNINGs, 6 NOTEs
See
  ‘/home/biocbuild/bbs-3.17-bioc/meat/VariantTools.Rcheck/00check.log’
for details.

##############################################################################
##############################################################################
###
### Running command:
###
###   /home/biocbuild/bbs-3.17-bioc/R/bin/R CMD INSTALL VariantTools
###
##############################################################################
##############################################################################


* installing to library ‘/home/biocbuild/bbs-3.17-bioc/R/site-library’
* installing *source* package ‘VariantTools’ ...
** using staged installation
** R
** data
** inst
** byte-compile and prepare package for lazy loading
** help
*** installing help indices
** building package indices
** installing vignettes
** testing if installed package can be loaded from temporary location
** testing if installed package can be loaded from final location
** testing if installed package keeps a record of temporary installation path
* DONE (VariantTools)

R version 4.3.1 (2023-06-16) -- "Beagle Scouts"
Copyright (C) 2023 The R Foundation for Statistical Computing
Platform: x86_64-pc-linux-gnu (64-bit)

R is free software and comes with ABSOLUTELY NO WARRANTY.
You are welcome to redistribute it under certain conditions.
Type 'license()' or 'licence()' for distribution details.

R is a collaborative project with many contributors.
Type 'contributors()' for more information and
'citation()' on how to cite R or R packages in publications.

Type 'demo()' for some demos, 'help()' for on-line help, or
'help.start()' for an HTML browser interface to help.
Type 'q()' to quit R.

> ##require("VariantTools") || stop("unable to load VariantTools package")
> ##VariantTools:::.test()
> 
> proc.time()
   user  system elapsed 
  0.149   0.036   0.174