Multiple platform build/check report for BioC 3.13 - CHECK results for EBarrays on nebbiolo1

##############################################################################
##############################################################################
###
### Running command:
###
###   /home/biocbuild/bbs-3.13-bioc/R/bin/R CMD check --install=check:EBarrays.install-out.txt --library=/home/biocbuild/bbs-3.13-bioc/R/library --no-vignettes --timings EBarrays_2.56.0.tar.gz
###
##############################################################################
##############################################################################


* using log directory ‘/home/biocbuild/bbs-3.13-bioc/meat/EBarrays.Rcheck’
* using R version 4.1.1 (2021-08-10)
* using platform: x86_64-pc-linux-gnu (64-bit)
* using session charset: UTF-8
* using option ‘--no-vignettes’
* checking for file ‘EBarrays/DESCRIPTION’ ... OK
* this is package ‘EBarrays’ version ‘2.56.0’
* checking package namespace information ... OK
* checking package dependencies ... OK
* checking if this is a source package ... OK
* checking if there is a namespace ... OK
* checking for hidden files and directories ... OK
* checking for portable file names ... OK
* checking for sufficient/correct file permissions ... OK
* checking whether package ‘EBarrays’ can be installed ... OK
* checking installed package size ... OK
* checking package directory ... OK
* checking ‘build’ directory ... OK
* checking DESCRIPTION meta-information ... NOTE
Packages listed in more than one of Depends, Imports, Suggests, Enhances:
  ‘Biobase’ ‘lattice’ ‘methods’
A package should be listed in only one of these fields.
* checking top-level files ... OK
* checking for left-over files ... OK
* checking index information ... OK
* checking package subdirectories ... OK
* checking R files for non-ASCII characters ... OK
* checking R files for syntax errors ... OK
* checking whether the package can be loaded ... OK
* checking whether the package can be loaded with stated dependencies ... OK
* checking whether the package can be unloaded cleanly ... OK
* checking whether the namespace can be loaded with stated dependencies ... OK
* checking whether the namespace can be unloaded cleanly ... OK
* checking dependencies in R code ... NOTE
'library' or 'require' call to ‘lattice’ which was already attached by Depends.
  Please remove these calls from your code.
* checking S3 generic/method consistency ... NOTE
Found the following apparent S3 methods exported but not registered:
  plot.ebarraysEMfit
See section ‘Registering S3 methods’ in the ‘Writing R Extensions’
manual.
* checking replacement functions ... OK
* checking foreign function calls ... OK
* checking R code for possible problems ... OK
* checking Rd files ... NOTE
prepare_Rd: crit.fun.Rd:51: Dropping empty section \keyword
prepare_Rd: ebplots.Rd:116-117: Dropping empty section \examples
* checking Rd metadata ... OK
* checking Rd cross-references ... OK
* checking for missing documentation entries ... OK
* checking for code/documentation mismatches ... OK
* checking Rd \usage sections ... OK
* checking Rd contents ... OK
* checking for unstated dependencies in examples ... OK
* checking contents of ‘data’ directory ... OK
* checking data for non-ASCII characters ... OK
* checking data for ASCII and uncompressed saves ... OK
* checking line endings in C/C++/Fortran sources/headers ... OK
* checking compiled code ... NOTE
Note: information on .o files is not available
* checking files in ‘vignettes’ ... OK
* checking examples ... OK
* checking for unstated dependencies in ‘tests’ ... OK
* checking tests ...
  Running ‘test.R’
 OK
* checking for unstated dependencies in vignettes ... OK
* checking package vignettes in ‘inst/doc’ ... OK
* checking running R code from vignettes ... SKIPPED
* checking re-building of vignette outputs ... SKIPPED
* checking PDF version of manual ... OK
* DONE

Status: 5 NOTEs
See
  ‘/home/biocbuild/bbs-3.13-bioc/meat/EBarrays.Rcheck/00check.log’
for details.

Installation output

##############################################################################
##############################################################################
###
### Running command:
###
###   /home/biocbuild/bbs-3.13-bioc/R/bin/R CMD INSTALL EBarrays
###
##############################################################################
##############################################################################


* installing to library ‘/home/biocbuild/bbs-3.13-bioc/R/library’
* installing *source* package ‘EBarrays’ ...
** using staged installation
** libs
gcc -I"/home/biocbuild/bbs-3.13-bioc/R/include" -DNDEBUG   -I/usr/local/include   -fpic  -g -O2  -Wall -c ebarrays.c -o ebarrays.o
gcc -shared -L/home/biocbuild/bbs-3.13-bioc/R/lib -L/usr/local/lib -o EBarrays.so ebarrays.o -L/home/biocbuild/bbs-3.13-bioc/R/lib -lR
installing to /home/biocbuild/bbs-3.13-bioc/R/library/00LOCK-EBarrays/00new/EBarrays/libs
** R
** data
** demo
** byte-compile and prepare package for lazy loading
** help
*** installing help indices
** building package indices
** installing vignettes
** testing if installed package can be loaded from temporary location
** checking absolute paths in shared objects and dynamic libraries
** testing if installed package can be loaded from final location
** testing if installed package keeps a record of temporary installation path
* DONE (EBarrays)

Tests output


R version 4.1.1 (2021-08-10) -- "Kick Things"
Copyright (C) 2021 The R Foundation for Statistical Computing
Platform: x86_64-pc-linux-gnu (64-bit)

R is free software and comes with ABSOLUTELY NO WARRANTY.
You are welcome to redistribute it under certain conditions.
Type 'license()' or 'licence()' for distribution details.

R is a collaborative project with many contributors.
Type 'contributors()' for more information and
'citation()' on how to cite R or R packages in publications.

Type 'demo()' for some demos, 'help()' for on-line help, or
'help.start()' for an HTML browser interface to help.
Type 'q()' to quit R.

> library(EBarrays)
Loading required package: Biobase
Loading required package: BiocGenerics
Loading required package: parallel

Attaching package: 'BiocGenerics'

The following objects are masked from 'package:parallel':

    clusterApply, clusterApplyLB, clusterCall, clusterEvalQ,
    clusterExport, clusterMap, parApply, parCapply, parLapply,
    parLapplyLB, parRapply, parSapply, parSapplyLB

The following objects are masked from 'package:stats':

    IQR, mad, sd, var, xtabs

The following objects are masked from 'package:base':

    Filter, Find, Map, Position, Reduce, anyDuplicated, append,
    as.data.frame, basename, cbind, colnames, dirname, do.call,
    duplicated, eval, evalq, get, grep, grepl, intersect, is.unsorted,
    lapply, mapply, match, mget, order, paste, pmax, pmax.int, pmin,
    pmin.int, rank, rbind, rownames, sapply, setdiff, sort, table,
    tapply, union, unique, unsplit, which.max, which.min

Welcome to Bioconductor

    Vignettes contain introductory material; view with
    'browseVignettes()'. To cite Bioconductor, see
    'citation("Biobase")', and for packages 'citation("pkgname")'.

Loading required package: lattice
> demo(ebarrays)


	demo(ebarrays)
	---- ~~~~~~~~

> library(EBarrays)

> ## EM algorithm 
> ## Lognormal-Normal Demo
> 
> ## mu10,sigma2,tau are parameters in the LNNB model; pde is the
> ## proportion of differentially expressed genes; n is the
> ## total number of genes; nr1 and nr2 are the number of replicate
> ## arrays in each group.
> 
> lnnb.sim <- function(mu10, sigmasq, tausq, pde, n, nr1, nr2)
+ {
+     de <- sample(c(TRUE, FALSE), size = n, replace = TRUE, prob = c(pde, 1 - pde))
+     x <- matrix(NA, n, nr1)
+     y <- matrix(NA, n, nr2)
+     mu1 <- rnorm(n, mu10, sqrt(tausq))
+     mu2.de <- rnorm(n, mu10, sqrt(tausq))
+     mu2 <- mu1
+     mu2[de] <- mu2.de[de]
+     for(j in 1:nr1) {
+         x[, j] <- rnorm(n, mu1, sqrt(sigmasq))
+     }
+     for(j in 1:nr2) {
+         y[, j] <- rnorm(n, mu2, sqrt(sigmasq))
+     }
+     outmat <- exp(cbind(x, y))
+     list(mu1 = mu1, mu2 = mu2, outmat = outmat, de = de)
+ }

> ## simulating data with
> ##  mu_0 = 2.33, sigma^2 = 0.1, tau^2 = 2
> ##  P(DE) = 0.2
> 
> sim.data1 <- lnnb.sim(2.33, 0.1, 2, 0.2, 2000, nr1 = 3, nr2 = 3)

> de.true1 <- sim.data1$de ## true indicators of differential expression

> sim.data2 <- lnnb.sim(1.33, 0.01, 2, 0.2, 2000, nr1 = 3, nr2 = 3)

> de.true2 <- sim.data2$de ## true indicators of differential expression

> testdata <- rbind(sim.data1$outmat,sim.data2$outmat)

> hypotheses <- ebPatterns(c("1 1 1 1 1 1", "1 1 1 2 2 2")) 

> em.out <- emfit(testdata, family = "LNN", hypotheses,
+                 cluster = 1:5,
+                 type = 2,
+                 verbose = TRUE,
+                 num.iter = 10)

 Checking for negative entries...
 Checking for negative entries...
 Generating summary statistics for patterns. 
 This may take a few seconds...

 Starting EM iterations (total 10 ).
 This may take a while

	 Starting iteration 1 ...
	 Starting iteration 2 ...
	 Starting iteration 3 ...
	 Starting iteration 4 ...
	 Starting iteration 5 ...
	 Starting iteration 6 ...
	 Starting iteration 7 ...
	 Starting iteration 8 ...
	 Starting iteration 9 ...
	 Starting iteration 10 ...


 Fit used  0.22 seconds user time

 Checking for negative entries...
 Generating summary statistics for patterns. 
 This may take a few seconds...

 Starting EM iterations (total 10 ).
 This may take a while

	 Starting iteration 1 ...
	 Starting iteration 2 ...
	 Starting iteration 3 ...
	 Starting iteration 4 ...
	 Starting iteration 5 ...
	 Starting iteration 6 ...
	 Starting iteration 7 ...
	 Starting iteration 8 ...
	 Starting iteration 9 ...
	 Starting iteration 10 ...


 Fit used  0.57 seconds user time

 Checking for negative entries...
 Generating summary statistics for patterns. 
 This may take a few seconds...

 Starting EM iterations (total 10 ).
 This may take a while

	 Starting iteration 1 ...
	 Starting iteration 2 ...
	 Starting iteration 3 ...
	 Starting iteration 4 ...
	 Starting iteration 5 ...
	 Starting iteration 6 ...
	 Starting iteration 7 ...
	 Starting iteration 8 ...
	 Starting iteration 9 ...
	 Starting iteration 10 ...


 Fit used  0.93 seconds user time

 Checking for negative entries...
 Generating summary statistics for patterns. 
 This may take a few seconds...

 Starting EM iterations (total 10 ).
 This may take a while

	 Starting iteration 1 ...
	 Starting iteration 2 ...
	 Starting iteration 3 ...
	 Starting iteration 4 ...
	 Starting iteration 5 ...
	 Starting iteration 6 ...
	 Starting iteration 7 ...
	 Starting iteration 8 ...
	 Starting iteration 9 ...
	 Starting iteration 10 ...


 Fit used  1.19 seconds user time

 Checking for negative entries...
 Generating summary statistics for patterns. 
 This may take a few seconds...

 Starting EM iterations (total 10 ).
 This may take a while

	 Starting iteration 1 ...
	 Starting iteration 2 ...
	 Starting iteration 3 ...
	 Starting iteration 4 ...
	 Starting iteration 5 ...
	 Starting iteration 6 ...
	 Starting iteration 7 ...
	 Starting iteration 8 ...
	 Starting iteration 9 ...
	 Starting iteration 10 ...


 Fit used  1.71 seconds user time

> em.out

 EB model fit 
	 Family: LNN ( Lognormal-Normal )

 Model parameter estimates:

              mu_0    sigma.2  tao_0.2
Cluster 1 1.293872 0.01023814 2.021188
Cluster 2 2.318540 0.10406513 2.028029

 Estimated mixing proportions:

          Pattern.1  Pattern.2
Cluster 1 0.3964182 0.10772770
Cluster 2 0.4013080 0.09454614

> post.out <- postprob(em.out, testdata)

> table(post.out$pattern[, 2] > .5, c(de.true1,de.true2))
       
        FALSE TRUE
  FALSE  3164  145
  TRUE     28  663

> table((post.out$cluster[, 2] > .5)+1, c(rep("Cluster 1",2000),rep("Cluster 2",2000)))
   
    Cluster 1 Cluster 2
  1       143      1946
  2      1857        54

> plotMarginal(em.out,testdata)

> par(ask=TRUE)

> plotCluster(em.out,testdata)

> par(ask=FALSE)

> lnnmv.em.out <- emfit(testdata, family = "LNNMV", hypotheses, groupid=c(1,1,1,2,2,2),
+                 verbose = TRUE,
+                 num.iter = 10,
+                 p.init = c(0.95, 0.05))

 Checking for negative entries...
 Generating summary statistics for patterns. 
 This may take a few seconds...

 Starting EM iterations (total 10 ).
 This may take a while

	 Starting iteration 1 ...
	 Starting iteration 2 ...
	 Starting iteration 3 ...
	 Starting iteration 4 ...
	 Starting iteration 5 ...
	 Starting iteration 6 ...
	 Starting iteration 7 ...
	 Starting iteration 8 ...
	 Starting iteration 9 ...
	 Starting iteration 10 ...


 Fit used  0.30 seconds user time

> lnnmv.em.out

 EB model fit 
	 Family: LNNMV ( Lognormal-Normal with modified variances )

 Model parameter estimates:

      mu_0  tao_0.2
1 1.801105 2.281533

 Estimated mixing proportions:

       Pattern.1 Pattern.2
p.temp 0.7834734 0.2165266

> post.out <- postprob(lnnmv.em.out, testdata, groupid=c(1,1,1,2,2,2))

> table(post.out$pattern[, 2] > .5, c(de.true1,de.true2))
       
        FALSE TRUE
  FALSE  3122  136
  TRUE     70  672
There were 50 or more warnings (use warnings() to see the first 50)
> 
> 
> 
> proc.time()
   user  system elapsed 
  6.303   0.118   6.407

name	user	system	elapsed
crit.fun	1.789	0.068	1.857
ebarraysFamily-class	0.006	0.000	0.006
emfit	0.115	0.000	0.115
gould	0.007	0.000	0.007
postprob	0.112	0.004	0.116
utilities	0.001	0.001	0.001

CHECK results for EBarrays on nebbiolo1

Summary

Command output

Installation output

Tests output

Example timings