BioC 3.0: CHECK report for ProCoNA on moscato1

Package: ProCoNA

Version: 1.4.1

Command: rm -rf ProCoNA.buildbin-libdir ProCoNA.Rcheck && mkdir ProCoNA.buildbin-libdir ProCoNA.Rcheck && D:\biocbld\bbs-3.0-bioc\R\bin\R.exe CMD INSTALL --build --merge-multiarch --library=ProCoNA.buildbin-libdir ProCoNA_1.4.1.tar.gz >ProCoNA.Rcheck\00install.out 2>&1 && cp ProCoNA.Rcheck\00install.out ProCoNA-install.out && D:\biocbld\bbs-3.0-bioc\R\bin\R.exe CMD check --library=ProCoNA.buildbin-libdir --install="check:ProCoNA-install.out" --force-multiarch --no-vignettes --timings ProCoNA_1.4.1.tar.gz

StartedAt: 2015-04-10 04:20:52 -0700 (Fri, 10 Apr 2015)

EndedAt: 2015-04-10 04:30:36 -0700 (Fri, 10 Apr 2015)

EllapsedTime: 584.6 seconds

RetCode: 0

Status:  OK

CheckDir: ProCoNA.Rcheck

Warnings: 0

##############################################################################
##############################################################################
###
### Running command:
###
###   rm -rf ProCoNA.buildbin-libdir ProCoNA.Rcheck && mkdir ProCoNA.buildbin-libdir ProCoNA.Rcheck && D:\biocbld\bbs-3.0-bioc\R\bin\R.exe CMD INSTALL --build --merge-multiarch --library=ProCoNA.buildbin-libdir ProCoNA_1.4.1.tar.gz >ProCoNA.Rcheck\00install.out 2>&1 && cp ProCoNA.Rcheck\00install.out ProCoNA-install.out  && D:\biocbld\bbs-3.0-bioc\R\bin\R.exe CMD check --library=ProCoNA.buildbin-libdir --install="check:ProCoNA-install.out" --force-multiarch --no-vignettes --timings ProCoNA_1.4.1.tar.gz
###
##############################################################################
##############################################################################


* using log directory 'D:/biocbld/bbs-3.0-bioc/meat/ProCoNA.Rcheck'
* using R version 3.1.3 (2015-03-09)
* using platform: i386-w64-mingw32 (32-bit)
* using session charset: ISO8859-1
* using option '--no-vignettes'
* checking for file 'ProCoNA/DESCRIPTION' ... OK
* checking extension type ... Package
* this is package 'ProCoNA' version '1.4.1'
* checking package namespace information ... OK
* checking package dependencies ... OK
* checking if this is a source package ... OK
* checking if there is a namespace ... OK
* checking for hidden files and directories ... OK
* checking for portable file names ... OK
* checking whether package 'ProCoNA' can be installed ... OK
* checking installed package size ... OK
* checking package directory ... OK
* checking 'build' directory ... OK
* checking DESCRIPTION meta-information ... OK
* checking top-level files ... OK
* checking for left-over files ... OK
* checking index information ... OK
* checking package subdirectories ... OK
* checking R files for non-ASCII characters ... OK
* checking R files for syntax errors ... OK
* loading checks for arch 'i386'
** checking whether the package can be loaded ... OK
** checking whether the package can be loaded with stated dependencies ... OK
** checking whether the package can be unloaded cleanly ... OK
** checking whether the namespace can be loaded with stated dependencies ... OK
** checking whether the namespace can be unloaded cleanly ... OK
** checking loading without being on the library search path ... OK
* loading checks for arch 'x64'
** checking whether the package can be loaded ... OK
** checking whether the package can be loaded with stated dependencies ... OK
** checking whether the package can be unloaded cleanly ... OK
** checking whether the namespace can be loaded with stated dependencies ... OK
** checking whether the namespace can be unloaded cleanly ... OK
** checking loading without being on the library search path ... OK
* checking dependencies in R code ... OK
* checking S3 generic/method consistency ... OK
* checking replacement functions ... OK
* checking foreign function calls ... OK
* checking R code for possible problems ... NOTE
bootstrapProconaNetwork: no visible global function definition for
  'cutreeDynamic'
buildProconaNetwork: no visible global function definition for
  'cutreeDynamic'
* checking Rd files ... OK
* checking Rd metadata ... OK
* checking Rd cross-references ... OK
* checking for missing documentation entries ... OK
* checking for code/documentation mismatches ... OK
* checking Rd \usage sections ... OK
* checking Rd contents ... OK
* checking for unstated dependencies in examples ... OK
* checking contents of 'data' directory ... OK
* checking data for non-ASCII characters ... OK
* checking data for ASCII and uncompressed saves ... OK
* checking installed files from 'inst/doc' ... OK
* checking files in 'vignettes' ... OK
* checking examples ...
** running examples for arch 'i386' ... [35s] OK
** running examples for arch 'x64' ... [42s] OK
Examples with CPU or elapsed time > 5s
                        user system elapsed
bootstrapProconaNetwork 7.23    0.1    7.34
* checking for unstated dependencies in tests ... OK
* checking tests ...
** running tests for arch 'i386' ...
  Running 'runTests.R' [24s]
 [25s] OK
** running tests for arch 'x64' ...
  Running 'runTests.R' [30s]
 [30s] OK
* checking for unstated dependencies in vignettes ... OK
* checking package vignettes in 'inst/doc' ... OK
* checking running R code from vignettes ... SKIPPED
* checking re-building of vignette outputs ... SKIPPED
* checking PDF version of manual ... OK
* DONE

NOTE: There was 1 note.
See
  'D:/biocbld/bbs-3.0-bioc/meat/ProCoNA.Rcheck/00check.log'
for details.

install for i386

* installing *source* package 'ProCoNA' ...
** R
** data
** inst
** preparing package for lazy loading
==========================================================================
*
*  Package WGCNA 1.46 loaded.
*
*    Important note: It appears that your system supports multi-threading,
*    but it is not enabled within WGCNA in R. 
*    To allow multi-threading within WGCNA with all available cores, use 
*
*          allowWGCNAThreads()
*
*    within R. Use disableWGCNAThreads() to disable threading if necessary.
*    Alternatively, set the following environment variable on your system:
*
*          ALLOW_WGCNA_THREADS=<number_of_processors>
*
*    for example 
*
*          ALLOW_WGCNA_THREADS=16
*
*    To set the environment variable in linux bash shell, type 
*
*           export ALLOW_WGCNA_THREADS=16
*
*     before running R. Other operating systems or shells will
*     have a similar command to achieve the same aim.
*
==========================================================================


** help
*** installing help indices
** building package indices
** installing vignettes
** testing if installed package can be loaded
==========================================================================
*
*  Package WGCNA 1.46 loaded.
*
*    Important note: It appears that your system supports multi-threading,
*    but it is not enabled within WGCNA in R. 
*    To allow multi-threading within WGCNA with all available cores, use 
*
*          allowWGCNAThreads()
*
*    within R. Use disableWGCNAThreads() to disable threading if necessary.
*    Alternatively, set the following environment variable on your system:
*
*          ALLOW_WGCNA_THREADS=<number_of_processors>
*
*    for example 
*
*          ALLOW_WGCNA_THREADS=16
*
*    To set the environment variable in linux bash shell, type 
*
*           export ALLOW_WGCNA_THREADS=16
*
*     before running R. Other operating systems or shells will
*     have a similar command to achieve the same aim.
*
==========================================================================



install for x64

* installing *source* package 'ProCoNA' ...
** testing if installed package can be loaded
==========================================================================
*
*  Package WGCNA 1.46 loaded.
*
*    Important note: It appears that your system supports multi-threading,
*    but it is not enabled within WGCNA in R. 
*    To allow multi-threading within WGCNA with all available cores, use 
*
*          allowWGCNAThreads()
*
*    within R. Use disableWGCNAThreads() to disable threading if necessary.
*    Alternatively, set the following environment variable on your system:
*
*          ALLOW_WGCNA_THREADS=<number_of_processors>
*
*    for example 
*
*          ALLOW_WGCNA_THREADS=16
*
*    To set the environment variable in linux bash shell, type 
*
*           export ALLOW_WGCNA_THREADS=16
*
*     before running R. Other operating systems or shells will
*     have a similar command to achieve the same aim.
*
==========================================================================


* MD5 sums
packaged installation of 'ProCoNA' as ProCoNA_1.4.1.zip
* DONE (ProCoNA)

name	user	system	elapsed
MMvsPS	0.36	0.02	0.37
MMvsPSallModules	0	0	0
accessors	0.49	0.00	0.50
bootstrapProconaNetwork	4.87	0.03	4.92
buildProconaNetwork	2.98	0.00	3.26
compareNetworksWithFishersExactTest	0	0	0
compareNetworksWithFishersExactTestProcona	0	0	0
corBootstrap	0.98	0.00	0.99
correlationWithPhenotypesHeatMap	1.56	0.00	1.62
getFisherMatrix	0.62	0.01	0.64
goStatTest	0	0	0
hclust	0.02	0.00	0.01
moduleMemberCorrelations	0.3	0.0	0.3
modulePhenotypeCorrelations	0.27	0.00	0.26
peptideConnectivityTest	1.2	0.0	1.2
peptideCorrelationTest	3.06	0.00	3.06
plotNet	0.28	0.00	0.28
ppiPermTest	0.37	0.00	0.38
printNet	0	0	0
subsetPeptideData	0.39	0.02	0.41
toPermTest	0.59	0.00	0.90
utri	0	0	0

name	user	system	elapsed
MMvsPS	0.34	0.00	0.35
MMvsPSallModules	0	0	0
accessors	0.24	0.00	0.24
bootstrapProconaNetwork	7.23	0.10	7.34
buildProconaNetwork	4.81	0.05	4.85
compareNetworksWithFishersExactTest	0	0	0
compareNetworksWithFishersExactTestProcona	0	0	0
corBootstrap	1.31	0.00	1.31
correlationWithPhenotypesHeatMap	1.97	0.03	2.54
getFisherMatrix	0.37	0.00	0.37
goStatTest	0	0	0
hclust	0	0	0
moduleMemberCorrelations	0.31	0.01	0.33
modulePhenotypeCorrelations	0.23	0.00	0.23
peptideConnectivityTest	1.99	0.05	2.06
peptideCorrelationTest	4.29	0.00	4.30
plotNet	0.34	0.00	0.34
ppiPermTest	0.55	0.00	0.55
printNet	0	0	0
subsetPeptideData	0.44	0.06	0.50
toPermTest	0.73	0.00	0.73
utri	0	0	0