BiocStyle 2.26.0

Bulk transcriptomic data is often generated from heterogeneous samples composed of multiple cell types, where measured values represent an averaged gene expression across all cell types. This heterogeneity is a major hurdle in the statistical analysis, as differences in cell type proportions may prevent or bias the detection of cell type-specific transcriptional programs.

*In silico* deconvolution of bulk gene expression data allows to infer cell
type composition of heterogeneous biological samples. Deconvolution methods are
typically used to estimate cell type fractions in bulk RNA-seq data from whole blood, peripheral blood mononuclear cells or other complex tissues in healthy and diseased patients (Abbas et al. 2009; Shen-Orr et al. 2010). Estimated cell type proportions can then be used in subsequent analysis to correct for cell-type heterogeneity making *in silico* deconvolution an attractive
alternative to the physical isolation of individual cell types or single cell RNA-seq.

Several deconvolution methods have been published in recent years, many of which use cell type-specific gene expression references. In this vignette, we present *granulator*, an R package that provides a unified testing interface to rapidly run and benchmark multiple state-of-the-art deconvolution
methods (Table 1).

Name | Function | Method | License | Reference |
---|---|---|---|---|

ols | stats::lsfit | Ordinary least squares | free (GPL-2) | |

nnls | nnls::nnls | Non-negative least squares | free (GPL-2, GPL-3) | reimplemented based on (Abbas et al. 2009) |

qprogwc | limSolve::lsei | Quadratic programming with non-negativity and sum-to-one constraint | free (GPL-2, GPL-3) | reimplemented based on (Gong and Szustakowski 2013) |

qprog | limSolve::Solve | Quadratic programming without constraints | free (GPL-2, GPL-3) | |

rls | MASS::rlm | Re-weighted least squares | free (GPL-2, GPL-3) | reimplemented based on (Monaco et al. 2019) |

svr | e1071::svr | Support vector regression | free (GPL-2, GPL-3) | reimplemented based on (Newman et al. 2015) |

dtangle | dtangle::dtangle | Linear mixing model | free (GPL-3) | (Hunt et al. 2018) |

Each deconvolution method takes as input bulk expression profiles of mixed tissue samples and a reference molecular profile of the individual cell types, which are used to estimate the abundance of cell types in each sample. In the following sections we show how to use *granulator* for the deconvolution of bulk RNA-seq data from peripheral blood mononuclear cells into the individual cellular components using public reference profiles (Table 2) and how to assess the quality of the obtained predictions.

Name | Description | Reference |
---|---|---|

sigMatrix_ABIS_S0 | PBMCs reference profile (17 cell types) | (Monaco et al. 2019) |

sigMatrix_ABIS_S1 | PBMCs reference profile (13 cell types) | |

sigMatrix_ABIS_S2 | PBMCs reference profile (11 cell types) | |

sigMatrix_ABIS_S3 | PBMCs reference profile (9 cell types) |

*granulator* can be installed from Bioconductor using:

```
if (!requireNamespace("BiocManager", quietly = TRUE))
install.packages("BiocManager")
BiocManager::install("granulator")
```

The package can be loaded using:

`library(granulator)`

The datasets used in this vignette comprises bulk RNA-seq gene expression data
of peripheral blood mononuclear cells (PBMCs) from 12 healthy donors and bulk
RNA-seq data of 29 isolated immune cell types from 4 healthy donors (Monaco et al. 2019),
publicly available on the NCBI database under GEO accession number GSE107011.
For convenience, a subset of the data is included in the package and can be loaded by using the function `load_ABIS()`

:

```
# load datasets for deconvolution of PBMC RNA-seq data
load_ABIS()
```

A subset of the PBMCs bulk RNA-seq data, stored in `bulkRNAseq_ABIS`

, consists of a gene (rows) by
sample (columns) matrix with transcript-per-million (TPM) gene expression values:

```
# print TPM values in bulk RNA-seq
bulkRNAseq_ABIS[1:5, 1:5]
```

```
## CYFZ FY2H FLWA 453W 684C
## S1PR3 4.275496 11.544026 10.4491331 13.192052 8.0657227
## RXFP2 2.038530 3.434462 5.4659900 2.877763 2.8150600
## ADAMTS5 0.010506 0.000000 0.1700436 0.000000 0.6866893
## CLEC6A 4.786615 9.357342 6.1288175 8.606988 4.4801144
## FXYD6 19.881627 29.860584 20.3102595 26.095918 22.7797553
```

We use the reference profile from isolated cell types for 17 immune cell types. The PBMCs reference profile, stored in `sigMatrix_ABIS_S0`

, consists of a gene (rows) by cell type (columns) matrix containing transcript-per-million (TPM)
gene expression values normalized for total mRNA abundance:

```
# print TPM values in reference profile matrix
sigMatrix_ABIS_S0[1:5, 1:5]
```

```
## Monocytes.C NK T.CD8.Memory T.CD4.Naive T.CD8.Naive
## S1PR3 45.720735 0.2790023 0.1981103 0.3657506 0.1930285
## RXFP2 17.877398 0.0000000 0.0000000 0.0000000 0.0000000
## ADAMTS5 2.550237 0.0000000 0.0000000 0.0000000 0.0000000
## CLEC6A 33.695996 0.0000000 0.0000000 0.0000000 0.0000000
## FXYD6 114.167642 0.4707691 0.1832934 0.2908456 0.1365307
```

Additionally, we provide a set of reference profile matrices stored in `sigMatrix_ABIS_S1`

, `sigMatrix_ABIS_S2`

, and `sigMatrix_ABIS_S3`

, which were derived at different levels of cell type resolution by summing over similar cell types.

Cell type proportions were measured by fluorescence-activated cell sorting (FACS) for 29 immune cell types (Monaco et al. 2019). Additional cell type proportions were computed by summing over cell types with highly similar transcriptional profiles. For instance `T.CD4.Naive`

proportions consist of the weighted sum of the subtypes Th1, Th2, Th1/Th17, Tregs, Tfh, Naive CD4 T cells and Terminal Effector CD4 T cells.

The measured cell type proportions, stored in `groundTruth_ABIS`

, consists of a sample (rows) by cell type (columns) matrix with proportions expressed in percent:

```
# print measured cell type proportions (percentages)
groundTruth_ABIS[1:5, 1:5]
```

```
## Monocytes.C NK T.CD8.Memory T.CD4.Naive T.CD8.Naive
## 453W 19.4 6.78 22.931 9.165 5.328
## 684C 19.6 8.45 7.078 10.051 8.411
## CR3L 14.0 10.80 3.597 10.871 11.532
## FLWA 19.6 19.50 4.530 6.084 3.815
## FY2H 26.8 2.60 12.008 8.098 5.279
```

The *granulator* workflow consists of four steps:

**Reference profiles**: Reference profiles for deconvolution are usually generated by differential expression analysis on bulk RNA-seq generated from isolated cell types or cell-type clusters identified by single cell RNA-seq;**Deconvolution**: Bulk RNA-seq data from heterogeneous samples is than deconvoluted using one or more reference profiles and deconvolution methods;**Benchmarking**: Estimated cell type proportions are benchmarked against measured cell type proportions to assess deconvolution performance. Measured proportions are usually generated from fluorescence-activated cell sorting or single cell RNA-seq data;**Correlation**: Benchmarked reference profiles can be used to deconvolve bulk RNA-seq data where individual cell types abundances are unknown. The deconvoluted cell type proportions can be correlated with each other in order to assess the degree of similarity in predictions across methods.

The performance of cell type deconvolution strongly depends on the choice and quality of the reference profile, and in particular on the degree of similarity between cell-type specific expression profiles (Vallania et al. 2018; Avila Cobos et al. 2020). It is therefore recommended to test multiple reference profile matrices generated at different cell type resolutions (Newman et al. 2019; Monaco et al. 2019). Here we use the published `sigMatrix_ABIS_S0`

reference profile, and additional signatures generated by collapsing highly similar cell types into single categories (`sigMatrix_ABIS_S1`

, `sigMatrix_ABIS_S2`

, `sigMatrix_ABIS_S3`

).

```
# create list if multiple signature matrices to test simultaneously
sigList = list(
ABIS_S0 = sigMatrix_ABIS_S0,
ABIS_S1 = sigMatrix_ABIS_S1,
ABIS_S2 = sigMatrix_ABIS_S2,
ABIS_S3 = sigMatrix_ABIS_S3)
```

We plot the cell-type similarity matrix of all reference profiles by computing their Kendall Rank Correlation Coefficient with `plot_similarity()`

, highlighting clusters of transcriptionally related cell types:

```
# plot signature matrix similarity matrices
plot_similarity(sigMatrix=sigList)
```

A useful metric to evaluate the quality of reference profile matrices is to compute the
Condition Number `k`

, which measures how sensitive the deconvolution is to variability in the input data. Generally, a matrix with low condition number (`k`

close to 1) is well-conditioned, as it leads to a stable solution.

Once suitable reference profiles have been generated, we use `deconvolute()`

to estimate cell type
proportions from the tissue bulk RNA-seq dataset. The function takes a matrix dataset
to be deconvoluted, a matrix or a list of reference profile matrices, and a vector of deconvolution methods.
All data matrices need to be normalized to TPM from raw counts with the function `get_TPM()`

. By default, `deconvolute()`

sequentially runs
all methods available. Optionally, we can provide a selected list of methods and the number of available processing cores
to minimize computation time. Every reference profile matrix is tested in combination with every selected method.

```
# deconvolute input data using all available methods by default
decon <- deconvolute(m = bulkRNAseq_ABIS, sigMatrix = sigList)
```

For each reference profile and method combination, the function returns the estimated cell type `coefficients`

and `proportions`

(in percentage). Although there may be slightly negative proportions, significant negative values means that deconvolution mehtods fails to converge on a
biological meaningful solution, and the reference profile matrix should be further refined.

We can look at the cell type proportions computed by the support vector regression model (`svr`

) using the `sigMatrix_ABIS_S0`

reference profile:

```
# print cell type proportions for svr model on ABIS_S0 reference profile
decon$proportions$svr_ABIS_S0[1:5, 1:5]
```

```
## B.Memory B.Naive Basophils.LD MAIT Monocytes.C
## 36TS 2.73 3.18 1.82 0.00 25.91
## 453W 2.27 4.09 0.45 0.45 24.09
## 4DUY 4.09 5.00 1.36 1.36 15.91
## 684C 1.36 11.82 1.36 1.82 21.82
## 925L 2.27 17.73 2.27 0.91 22.73
```

We can plot the estimated cell type proportions with the function `plot_proportions()`

. Notice that while the sum of cell types proportions cannot exceed 100%, for some methods part of the bulk RNA-seq signal remains unassigned.

```
# plot cell type proportions for svr model on ABIS_S0 reference profile
plot_proportions(deconvoluted = decon, method = 'svr', signature = 'ABIS_S0')
```

To plot all estimated cell type proportions we use the function `plot_deconvolute()`

, which allows to compare results across deconvolution methods and cell types. The option `scale`

indicates whether cell type proportions should be transformed into standard scores. Scaling is useful to directly compare deconvolution output, as the absolute percentages may vary considerably across methods.

```
# plot cell type proportions
plot_deconvolute(deconvoluted = decon, scale = TRUE, labels = FALSE)
```

The third step in the workflow is dedicated to assessing the
performance of deconvolution by taking advantage of available known cell types abundances.
We benchmark deconvolution methods by regressing the estimates against the measured
cell type proportions with the function `benchmark()`

:

```
# benchmark methods by correlating estimated to measured cell type proportions
bench <- benchmark(deconvoluted = decon, ground_truth = groundTruth_ABIS)
```

Summary statistics of the regression models by method, signature, and cell type can be displayed as follows:

```
# print metrics
head(bench$summary)
```

```
## signature method celltype pcc ccc adj.r2 rmse
## 1 ABIS_S0 dtangle B.Memory 0.6256 0.3488 0.330 0.0083
## 2 ABIS_S0 dtangle B.Naive 0.9620 0.9265 0.920 0.0062
## 3 ABIS_S0 dtangle Basophils.LD 0.9095 0.7520 0.810 0.0031
## 4 ABIS_S0 dtangle MAIT 0.8004 0.6796 0.600 0.0075
## 5 ABIS_S0 dtangle Monocytes.C 0.4210 0.3101 0.095 0.0320
## 6 ABIS_S0 dtangle Monocytes.NC.I 0.8373 0.8280 0.670 0.0085
```

We can also print the average metrics by regression method and signature as follows:

```
# print metrics
head(bench$rank)
```

```
## signature method mean_pcc mean_ccc mean_adj.r2 mean_rmse
## 1 ABIS_S2 nnls 0.8299 0.2093 0.6645 0.0118
## 2 ABIS_S2 ols 0.8298 0.2121 0.6636 0.0129
## 3 ABIS_S2 qprog 0.8298 0.2121 0.6636 0.0129
## 4 ABIS_S2 svr 0.8292 0.4746 0.6655 0.0161
## 5 ABIS_S3 svr 0.8045 0.4305 0.6211 0.0180
## 6 ABIS_S2 rls 0.7922 0.2129 0.6155 0.0124
```

Evaluation metrics include the Pearson Correlation Coefficient (`pcc`

),
the Concordance Correlation Coefficient (`ccc`

), the Coefficient of Determination (`adj.r2`

), and the Root Mean Square Error (`rmse`

). When a cell type cannot be deconvoluted, it’s proportions are returned as `NA`

, which causes the corresponding metric coefficients to be missing as well.

While `pcc`

measures the linear correlation between relative changes in proportions across all samples, `ccc`

measures the linear correlation between true and estimated proportions by taking the mean absolute percentages into account. Both `pcc`

and `ccc`

metrics can range between 1 and -1: a value of 1 represents a total positive correlation, 0 no correlation, and −1 a total negative correlation. `adj.r2`

represents the square of `pcc`

adjusted for the number of predictors in the model and takes values between 0 and 1. Conversely the `rmse`

measures the quadratic mean of the differences between predicted values and observed values. A value of 0.05 represent a difference of 5%.

The linear regression of estimated versus measured cell type proportions can be visualized
using `plot_regress()`

on the `benchmark()`

results. Here, we analyze the performance of the support vector regression model (`svr`

) across the deconvoluted cell types using the `sigMatrix_ABIS_S0`

reference profile:

```
# plot regression for svr model on ABIS_S0 reference profile
plot_regress(benchmarked = bench, method = 'svr', signature = 'ABIS_S0')
```