Contents

1 Description of implemented clocks

This manual describes how to estimate chronological and gestational DNA methylation (DNAm) age as well as biological age using different methylation clocks. The package includes the following estimators:

1.1 Chronological DNAm age (in years)

  • Horvath’s clock: It uses 353 CpGs described in Horvath (2013). It was trained using 27K and 450K arrays in samples from different tissues. Other three different age-related biomarkers are also computed:
    • AgeAcDiff (DNAmAge acceleration difference): Difference between DNAmAge and chronological age.
    • IEAA Residuals obtained after regressing DNAmAge and chronological age adjusted by cell counts.
    • EEAA Residuals obtained after regressing DNAmAge and chronological age. This measure was also known as DNAmAge acceleration residual in the first Horvath’s paper.
  • Hannum’s clock: It uses 71 CpGs described in Hannum et al. (2013). It was trained using 450K array in blood samples. Another are-related biomarer is also computed:
    • AMAR (Apparent Methylomic Aging Rate): Measure proposed in Hannum et al. (2013) computed as the ratio between DNAm age and the chronological age.
  • BNN: It uses Horvath’s CpGs to train a Bayesian Neural Network (BNN) to predict DNAm age as described in Alfonso and Gonzalez (2020).
  • Horvath’s skin+blood clock (skinHorvath): Epigenetic clock for skin and blood cells. It uses 391 CpGs described in Horvath et al. (2018). It was trained using 450K EPIC arrays in skin and blood sampels.
  • PedBE clock: Epigenetic clock from buccal epithelial swabs. It’s intended purpose is buccal samples from individuals aged 0-20 years old. It uses 84 CpGs described in McEwen et al. (2019). The authors gathered 1,721 genome-wide DNAm profiles from 11 different cohorts with individuals aged 0 to 20 years old.
  • Wu’s clock: It uses 111 CpGs described in Wu et al. (2019). It is designed to predict age in children. It was trained using 27K and 450K.
  • BLUP clock: It uses 319607 CpGs described in Zhang et al. (2019). It was trained using 450K and EPIC arrays in blood (13402 samples) and saliva (259 samples). Age predictors based on training sets with various sample sizes using Best Linear Unbiased Prediction (BLUP)
  • EN clock: It uses 514 CpGs described in Zhang et al. (2019). It was trained using 450K and EPIC arrays in blood (13402 samples) and saliva (259 samples). Age predictors based on training sets with various sample sizes using Elastic Net (EN)

1.2 Gestational DNAm age (in weeks)

  • Knight’s clock: It uses 148 CpGs described in Knight et al. (2016). It was trained using 27K and 450K arrays in cord blood samples.
  • Bohlin’s clock: It uses 96 CpGs described in Bohlin et al. (2016). It was trained using 450K array in cord blood samples.
  • Mayne’s clock: It uses 62 CpGs described in Mayne et al. (2017). It was trained using 27K and 450K.
  • EPIC clock: EPIC-based predictor of gestational age. It uses 176 CpGs described in Haftorn et al. (2021). It was trained using EPIC arrays in cord blood samples.
  • Lee’s clocks: Three different biological clocks described in Lee et al. (2019) are implemented. It was trained for 450K and EPIC arrays in placenta samples.
  • RPC clock: Robust placental clock (RPC). It uses 558 CpG sites.
  • CPC clock: Control placental clock (CPC). It usses 546 CpG sites.
  • Refined RPC clock: Useful for uncomplicated term pregnancies (e.g. gestational age >36 weeks). It uses 396 CpG sites.

The biological DNAm clocks implemented in our package are:

  • Levine’s clock (also know as PhenoAge): It uses 513 CpGs described in Levine et al. (2018). It was trained using 27K, 450K and EPIC arrays in blood samples.
  • Telomere Length’s clock (TL): It uses 140 CpGs described in Lu et al. (2019) It was trained using 450K and EPIC arrays in blood samples.

The main aim of this package is to facilitate the interconnection with R and Bioconductor’s infrastructure and, hence, avoiding submitting data to online calculators. Additionally, methylclock also provides an unified way of computing DNAm age to help downstream analyses.

2 Getting started

The package depends on some R packages that can be previously installed into your computer by:

install.packages(c("tidyverse", "impute", "Rcpp"))

Then methylclock package is installed into your computer by executing:

if (!requireNamespace("BiocManager", quietly = TRUE))
                        install.packages("BiocManager")

BiocManager::install("methylclock")

The package is loaded into R as usual:

library(methylclockData)
library(methylclock)

These libraries are required to reproduce this document:

library(Biobase)
library(tibble)
library(impute)
library(ggplot2)
library(ggpmisc)
library(GEOquery)

3 DNA Methylation clocks

The main function to estimate chronological and biological mDNA age is called DNAmAge while the gestational DNAm age is estimated using DNAmGA function. Both functions have similar input arguments. Next subsections detail some of the important issues to be consider before computind DNAm clocks.

3.1 Data format

The methylation data is given in the argument x. They can be either beta or M values. The argument toBetas should be set to TRUE when M values are provided. The x object can be:

  • A matrix with CpGs in rows and individuals in columns having the name of the CpGs in the rownames.

  • A data frame or a tibble with CpGs in rows and individuals in columns having the name of the CpGs in the first column (e.g. cg00000292, cg00002426, cg00003994, …) as required in the Horvath’s DNA Methylation Age Calculator website (https://dnamage.genetics.ucla.edu/home).

  • A GenomicRatioSet object, the default method to encapsulate methylation data in minfi Bioconductor package.

  • An ExpressionSet object as obtained, for instance, when downloading methylation data from GEO (https://www.ncbi.nlm.nih.gov/geo/).

3.2 Data nomalization

In principle, data can be normalized by using any of the existing standard methods such as QN, ASMN, PBC, SWAN, SQN, BMIQ (see a revision of those methods in Wang et al. (2015)). DNAmAge function includes the BMIQ method proposed by Teschendorff et al. (2012) using Horvath’s robust implementation that basically consists of an optimal R code implementation and optimization procedures. This normalization is recommended by Horvath since it improves the predictions for his clock. This normalization procedure is very time-consuming. In order to overcome these difficulties, we have parallelize this process using BiocParallel library. This step is not mandatory, so that, you can use your normalized data and set the argument normalize equal to FALSE (default).

3.3 Missing individual’s data

All the implemented methods require complete cases. DNAmAge function has an imputation method based on KNN implemented in the function knn.impute from impute Bioconductor package. This is performed when missing data is present in the CpGs used in any of the computed clocks. There is also another option based on a fast imputation method that imputes missing values by the median of required CpGs as recommended in Bohlin et al. (2016). This is recommended when analyzing 450K arrays since knn.impute for large datasets may be very time consuming. Fast imputation can be performed by setting fastImp=TRUE which is not the default value.

3.4 Missing CpGs of DNAm clocks

By default the package computes the different clocks when there are more than 80% of the required CpGs of each method. Nothing is required when having missing CpGs since the main functions will return NA for those estimators when this criteria is not meet. Let us use a test dataset (TestDataset) which is available within the package to illustrate the type of information we are obtaining:

# Get TestDataset data
TestDataset <- get_TestDataset()

cpgs.missing <- checkClocks(TestDataset)
          clock Cpgs_in_clock missing_CpGs percentage
  1     Horvath           353            2        0.6
  2      Hannum            71           64       90.1
  3      Levine           513            3        0.6
  4 SkinHorvath           391          283       72.4
  5       PedBE            94           91       96.8
  6          Wu           111            2        1.8
  7          TL           140          137       97.9
  8        BLUP        319607       300288       94.0
  9          EN           514          476       92.6
cpgs.missing.GA <- checkClocksGA(TestDataset)
     clock Cpgs_in_clock missing_CpGs percentage
  1 Knight           148            0        0.0
  2 Bohlin            87           87      100.0
  3  Mayne            62            0        0.0
  4    Lee          1125         1072       95.3
  5   EPIC           176          170       96.6

The objects cpgs.missing and cpgs.missing.GA are lists having the missing CpGs of each clock

names(cpgs.missing)
  [1] "Horvath"     "Hannum"      "Levine"      "skinHorvath" "PedBE"      
  [6] "Wu"          "TL"          "BLUP"        "EN"

We can see which are those CpGs for a given clock (for example Hannum) with the function commonClockCpgs :

commonClockCpgs(cpgs.missing, "Hannum" )
   [1] "cg20822990"      "cg22512670"      "cg25410668"      "cg04400972"     
   [5] "cg16054275"      "cg10501210"      "ch.2.30415474F"  "cg22158769"     
   [9] "cg02085953"      "cg06639320"      "cg22454769"      "cg24079702"     
  [13] "cg23606718"      "cg22016779"      "cg03607117"      "cg07553761"     
  [17] "cg00481951"      "cg25478614"      "cg25428494"      "cg02650266"     
  [21] "cg08234504"      "cg23500537"      "cg20052760"      "cg16867657"     
  [25] "cg06685111"      "cg00486113"      "cg13001142"      "cg20426994"     
  [29] "cg14361627"      "cg08097417"      "cg07955995"      "cg22285878"     
  [33] "cg03473532"      "cg08540945"      "cg07927379"      "cg16419235"     
  [37] "cg07583137"      "cg22796704"      "cg19935065"      "cg23091758"     
  [41] "cg23744638"      "cg04940570"      "cg11067179"      "cg22213242"     
  [45] "cg06419846"      "cg02046143"      "cg00748589"      "cg18473521"     
  [49] "cg01528542"      "ch.13.39564907R" "cg03032497"      "cg04875128"     
  [53] "cg09651136"      "cg03399905"      "cg04416734"      "cg07082267"     
  [57] "cg14692377"      "cg06874016"      "cg21139312"      "cg02867102"     
  [61] "cg19283806"      "cg14556683"      "cg07547549"      "cg08415592"
commonClockCpgs(cpgs.missing.GA, "Bohlin" )
   [1] "cg00153101" "cg00602416" "cg00711496" "cg01190109" "cg01635555"
   [6] "cg01833485" "cg02324006" "cg02405476" "cg02567958" "cg02642822"
  [11] "cg03108070" "cg03281561" "cg03337084" "cg03507326" "cg03710860"
  [16] "cg03729251" "cg03773820" "cg03963689" "cg04347477" "cg04685228"
  [21] "cg05053327" "cg05544807" "cg05877497" "cg06753281" "cg06897661"
  [26] "cg07106169" "cg07676709" "cg07738730" "cg07749613" "cg07788865"
  [31] "cg07835443" "cg08326019" "cg08620426" "cg08943494" "cg09447786"
  [36] "cg10308785" "cg11124260" "cg11294761" "cg11864574" "cg12880227"
  [41] "cg12999267" "cg13036381" "cg13066703" "cg13433246" "cg13641317"
  [46] "cg13733403" "cg13959344" "cg13982823" "cg14276580" "cg14427590"
  [51] "cg15035133" "cg15131146" "cg15165154" "cg15908709" "cg16187883"
  [56] "cg16348385" "cg17022232" "cg18183624" "cg18217136" "cg18954401"
  [61] "cg19057830" "cg19439123" "cg19875532" "cg20301308" "cg20303561"
  [66] "cg20816447" "cg21081878" "cg21143441" "cg21155834" "cg21221899"
  [71] "cg21707172" "cg21878650" "cg22761205" "cg22796593" "cg22797644"
  [76] "cg23051248" "cg23346945" "cg23403099" "cg23457357" "cg24041556"
  [81] "cg24087613" "cg24366564" "cg25150953" "cg25531857" "cg25639749"
  [86] "cg26077811" "cg26092675"

In Section 4.1 we describe how to change this 80% threshold.

3.5 Cell counts

The EEAA method requires to estimate cell counts. We use the package meffil (Min et al. (2018)) that provides some functions to estimate cell counts using predefined datasets. This is performed by setting cell.count=TRUE (default value). The reference panel is passed through the argument cell.count.reference. So far, the following options are available:

  • “blood gse35069 complete”: methylation profiles from Reinius et al. (2012) for purified blood cell types. It includes CD4T, CD8T, Mono, Bcell, NK, Neu and Eos.
  • “blood gse35069”: methylation profiles from Reinius et al. (2012) for purified blood cell types. It includes CD4T, CD8T, Mono, Bcell, NK and Gran.
  • “blood gse35069 chen”: methylation profiles from Chen et al. (2017) blood cell types. It includes CD4T, CD8T, Mono, Bcell, NK, Neu and Eos.
  • “andrews and bakulski cord blood”. Cord blood reference from
  1. It includes Bcell, CD4T, CD8T, Gran, Mono, NK and nRBC.
  • “cord blood gse68456” Cord blood methylation profiles from
  1. It includes CD4T, CD8T, Mono, Bcell, NK, Neu, Eos and RBC.
  • “gervin and lyle cord blood” Cord blood reference generated by Kristina Gervin and Robert Lyle, available at miffil package. It includes CD14, Bcell, CD4T, CD8T, NK, Gran.
  • “saliva gse48472”: Reference generated from the multi-tissue pannel from
  1. It includes Buccal, CD4T, CD8T, Mono, Bcell, NK, Gran.
  • “guintivano dlpfc”: Reference generated from Guintivano, Aryee, and Kaminsky (2013). It includes dorsolateral prefrontal cortex, NeuN_neg and NeuN_pos.
  • “combined cord blood”: References generated based in samples assayed by Bakulski et al, Gervin et al., de Goede et al., and Lin et al. It includes umbilical cord blood, Bcell, CD4T, CD8T, Gran, Mono, NK and nRBC

4 Chronological and biological DNAm age estimation

Next we illustrate how to estimate the chronological DNAm age using several datasets which aim to cover different data input formats.

IMPORTANT NOTE: On some systems we can find an error in the DNAmAge() function when parameter cell.count = TRUE. This error is related to preprocessCore package and can be fixed by disabling multi-threading when installing the preprocessCore package using the command

BiocManager::install("preprocessCore", 
                     configure.args = "--disable-threading", 
                     force = TRUE)

4.1 Data in Horvath’s format (e.g. csv with CpGs in rows)

Let us start by reproducing the results proposed in Horvath (2013). It uses the format available in the file ’MethylationDataExample55.csv” from his tutorial (available here). These data are available at methylclock package. Although these data can be loaded into R by using standard functions such as read.csv we hihgly recommend to use functions from tidiverse, in particular read_csv from readr package. The main reason is that currently researchers are analyzing Illumina 450K or EPIC arrays that contains a huge number of CpGs that can take a long time to be loaded when using basic importing R function. These functions import csv data as tibble which is one of the possible formats of DNAmAge function

library(tidyverse)
MethylationData <- get_MethylationDataExample()
MethylationData
  # A tibble: 27,578 × 17
     ProbeID GSM946048 GSM946049 GSM946052 GSM946054 GSM946055 GSM946056 GSM946059
     <chr>       <dbl>     <dbl>     <dbl>     <dbl>     <dbl>     <dbl>     <dbl>
   1 cg0000…    0.706    0.730     0.705     0.751     0.715     0.634     0.682  
   2 cg0000…    0.272    0.274     0.311     0.279     0.178     0.269     0.330  
   3 cg0000…    0.0370   0.0147    0.0171    0.0290    0.0163    0.0243    0.0127 
   4 cg0000…    0.133    0.120     0.121     0.107     0.110     0.129     0.102  
   5 cg0000…    0.0309   0.0192    0.0217    0.0132    0.0181    0.0243    0.0199 
   6 cg0000…    0.0700   0.0715    0.0655    0.0719    0.0914    0.0508    0.0294 
   7 cg0000…    0.993    0.993     0.993     0.994     0.991     0.994     0.993  
   8 cg0000…    0.0215   0.0202    0.0187    0.0169    0.0162    0.0143    0.0172 
   9 cg0000…    0.0105   0.00518   0.00410   0.00671   0.00758   0.00518   0.00543
  10 cg0001…    0.634    0.635     0.621     0.639     0.599     0.591     0.594  
  # ℹ 27,568 more rows
  # ℹ 9 more variables: GSM946062 <dbl>, GSM946064 <dbl>, GSM946065 <dbl>,
  #   GSM946066 <dbl>, GSM946067 <dbl>, GSM946073 <dbl>, GSM946074 <dbl>,
  #   GSM946075 <dbl>, GSM946076 <dbl>

IMPORTANT NOTE: Be sure that the first column contains the CpG names. Sometimes, your imported data look like this one (it can happen, for instance, if the csv file was created in R without indicating row.names=FALSE)

> mydata

# A tibble: 473,999 x 6
    X1 Row.names BIB_15586_1X BIB_33043_1X EDP_5245_1X KAN_584_1X 
    <int> <chr>            <dbl>        <dbl>       <dbl>      <dbl>     
1     1 cg000000~       0.635        0.575       0.614      0.631     
2     2 cg000001~       0.954        0.948       0.933      0.950     
3     3 cg000001~       0.889        0.899       0.901      0.892     
4     4 cg000001~       0.115        0.124       0.107      0.123     
5     5 cg000002~       0.850        0.753       0.806      0.815     
6     6 cg000002~       0.676        0.771       0.729      0.665     
7     7 cg000002~       0.871        0.850       0.852      0.863     
8     8 cg000003~       0.238        0.174       0.316      0.206

If so, the first column must be removed before being used as the input object in DNAmAge funcion. It can be done using dplyr function

> mydata2 <- select(mydata, -1)

# A tibble: 473,999 x 5
    Row.names BIB_15586_1X BIB_33043_1X EDP_5245_1X KAN_584_1X 
    <chr>            <dbl>        <dbl>       <dbl>      <dbl>     
1    cg000000~       0.635        0.575       0.614      0.631     
2    cg000001~       0.954        0.948       0.933      0.950     
3    cg000001~       0.889        0.899       0.901      0.892     
4    cg000001~       0.115        0.124       0.107      0.123     
5    cg000002~       0.850        0.753       0.806      0.815     
6    cg000002~       0.676        0.771       0.729      0.665     
7    cg000002~       0.871        0.850       0.852      0.863     
8    cg000003~       0.238        0.174       0.316      0.206

In any case, if you use the object mydata that contains the CpGs in the second column, you will see this error message:

> DNAmAge(mydata)
Error in DNAmAge(mydata) : First column should contain CpG names

Once data is in the proper format, DNAmAge can be estimated by simply:

age.example55 <- DNAmAge(MethylationData)
  Warning in predAge(cpgs.imp, coefHannum, intercept = FALSE, min.perc): The number of missing CpGs forHannumclock exceeds 80%.
    ---> This DNAm clock will be NA.
   rows : 353 cols : 16
  Warning in predAge(cpgs.imp, coefSkin, intercept = TRUE, min.perc): The number of missing CpGs forSkinclock exceeds 80%.
    ---> This DNAm clock will be NA.
  Warning in predAge(cpgs.imp, coefPedBE, intercept = TRUE, min.perc): The number of missing CpGs forPedBEclock exceeds 80%.
    ---> This DNAm clock will be NA.
  Warning in predAge(cpgs.imp, coefTL, intercept = TRUE, min.perc): The number of missing CpGs forTLclock exceeds 80%.
    ---> This DNAm clock will be NA.
  Warning in predAge(cpgs.imp, coefBLUP, intercept = TRUE, min.perc): The number of missing CpGs forBLUPclock exceeds 80%.
    ---> This DNAm clock will be NA.
  Warning in predAge(cpgs.imp, coefEN, intercept = TRUE, min.perc): The number of missing CpGs forENclock exceeds 80%.
    ---> This DNAm clock will be NA.
age.example55
  # A tibble: 16 × 11
     id      Horvath Hannum Levine   BNN skinHorvath PedBE    Wu TL    BLUP  EN   
     <chr>     <dbl> <lgl>   <dbl> <dbl> <lgl>       <lgl> <dbl> <lgl> <lgl> <lgl>
   1 GSM946…   51.8  NA      -30.3 56.4  NA          NA    1.08  NA    NA    NA   
   2 GSM946…   39.8  NA      -29.6 42.1  NA          NA    0.808 NA    NA    NA   
   3 GSM946…   26.4  NA      -33.3 25.6  NA          NA    0.772 NA    NA    NA   
   4 GSM946…   34.0  NA      -36.0 28.0  NA          NA    0.941 NA    NA    NA   
   5 GSM946…   10.1  NA      -52.8 13.4  NA          NA    0.456 NA    NA    NA   
   6 GSM946…   20.4  NA      -42.2 16.7  NA          NA    0.621 NA    NA    NA   
   7 GSM946…    6.00 NA      -44.8  7.54 NA          NA    0.258 NA    NA    NA   
   8 GSM946…   34.6  NA      -23.2 34.6  NA          NA    0.624 NA    NA    NA   
   9 GSM946…    7.91 NA      -49.8 12.0  NA          NA    0.237 NA    NA    NA   
  10 GSM946…    4.72 NA      -48.2  6.43 NA          NA    0.396 NA    NA    NA   
  11 GSM946…   29.6  NA      -39.9 28.5  NA          NA    0.413 NA    NA    NA   
  12 GSM946…    1.38 NA      -48.3  3.48 NA          NA    0.122 NA    NA    NA   
  13 GSM946…   56.0  NA      -26.7 47.3  NA          NA    0.714 NA    NA    NA   
  14 GSM946…   24.0  NA      -39.7 23.3  NA          NA    0.676 NA    NA    NA   
  15 GSM946…    9.38 NA      -45.4 11.9  NA          NA    0.251 NA    NA    NA   
  16 GSM946…   38.8  NA      -27.5 41.4  NA          NA    0.599 NA    NA    NA

As mention in Section 3.4 some clocks returns NA when there are more than 80% of the required CpGs are missing as we can see when typing

missCpGs <- checkClocks(MethylationData)
          clock Cpgs_in_clock missing_CpGs percentage
  1     Horvath           353            0        0.0
  2      Hannum            71           64       90.1
  3      Levine           513            0        0.0
  4 SkinHorvath           391          282       72.1
  5       PedBE            94           91       96.8
  6          Wu           111            0        0.0
  7          TL           140          137       97.9
  8        BLUP        319607       300192       93.9
  9          EN           514          476       92.6

Here we can observe that 72.1% of the required CpGs for SkinHorvath clock are missing. We could estimate DNAm age using this clock just changing the argument min.perc in DNAmAge. For example, we can indicate that the minimum amount of required CpGs for computing a given clock should be 25%.

age.example55.2 <- DNAmAge(MethylationData, min.perc = 0.25)
  Warning in predAge(cpgs.imp, coefHannum, intercept = FALSE, min.perc): The number of missing CpGs forHannumclock exceeds 25%.
    ---> This DNAm clock will be NA.
   rows : 353 cols : 16
  Warning in predAge(cpgs.imp, coefPedBE, intercept = TRUE, min.perc): The number of missing CpGs forPedBEclock exceeds 25%.
    ---> This DNAm clock will be NA.
  Warning in predAge(cpgs.imp, coefTL, intercept = TRUE, min.perc): The number of missing CpGs forTLclock exceeds 25%.
    ---> This DNAm clock will be NA.
  Warning in predAge(cpgs.imp, coefBLUP, intercept = TRUE, min.perc): The number of missing CpGs forBLUPclock exceeds 25%.
    ---> This DNAm clock will be NA.
  Warning in predAge(cpgs.imp, coefEN, intercept = TRUE, min.perc): The number of missing CpGs forENclock exceeds 25%.
    ---> This DNAm clock will be NA.
age.example55.2
  # A tibble: 16 × 11
     id      Horvath Hannum Levine   BNN skinHorvath PedBE    Wu TL    BLUP  EN   
     <chr>     <dbl> <lgl>   <dbl> <dbl>       <dbl> <lgl> <dbl> <lgl> <lgl> <lgl>
   1 GSM946…   51.8  NA      -30.3 56.4         7.15 NA    1.08  NA    NA    NA   
   2 GSM946…   39.8  NA      -29.6 42.1         7.09 NA    0.808 NA    NA    NA   
   3 GSM946…   26.4  NA      -33.3 25.6         5.93 NA    0.772 NA    NA    NA   
   4 GSM946…   34.0  NA      -36.0 28.0         6.34 NA    0.941 NA    NA    NA   
   5 GSM946…   10.1  NA      -52.8 13.4         5.76 NA    0.456 NA    NA    NA   
   6 GSM946…   20.4  NA      -42.2 16.7         5.79 NA    0.621 NA    NA    NA   
   7 GSM946…    6.00 NA      -44.8  7.54        5.64 NA    0.258 NA    NA    NA   
   8 GSM946…   34.6  NA      -23.2 34.6         5.55 NA    0.624 NA    NA    NA   
   9 GSM946…    7.91 NA      -49.8 12.0         5.06 NA    0.237 NA    NA    NA   
  10 GSM946…    4.72 NA      -48.2  6.43        5.48 NA    0.396 NA    NA    NA   
  11 GSM946…   29.6  NA      -39.9 28.5         6.19 NA    0.413 NA    NA    NA   
  12 GSM946…    1.38 NA      -48.3  3.48        4.91 NA    0.122 NA    NA    NA   
  13 GSM946…   56.0  NA      -26.7 47.3         7.07 NA    0.714 NA    NA    NA   
  14 GSM946…   24.0  NA      -39.7 23.3         6.23 NA    0.676 NA    NA    NA   
  15 GSM946…    9.38 NA      -45.4 11.9         5.57 NA    0.251 NA    NA    NA   
  16 GSM946…   38.8  NA      -27.5 41.4         6.69 NA    0.599 NA    NA    NA

In that case, we see as SkinHorvath clock is estimated (though it can be observed that the estimation is not very accurate - this is why we considered at least having 80% of the required CpGs).

By default all available clocks (Hovarth, Hannum, Levine, BNN, skinHorvath,…) are estimated. One may select a set of clocks by using the argument clocks as follows:

age.example55.sel <- DNAmAge(MethylationData, clocks=c("Horvath", "BNN"))
   rows : 353 cols : 16
age.example55.sel
  # A tibble: 16 × 3
     id        Horvath   BNN
     <chr>       <dbl> <dbl>
   1 GSM946048   51.8  56.4 
   2 GSM946049   39.8  42.1 
   3 GSM946052   26.4  25.6 
   4 GSM946054   34.0  28.0 
   5 GSM946055   10.1  13.4 
   6 GSM946056   20.4  16.7 
   7 GSM946059    6.00  7.54
   8 GSM946062   34.6  34.6 
   9 GSM946064    7.91 12.0 
  10 GSM946065    4.72  6.43
  11 GSM946066   29.6  28.5 
  12 GSM946067    1.38  3.48
  13 GSM946073   56.0  47.3 
  14 GSM946074   24.0  23.3 
  15 GSM946075    9.38 11.9 
  16 GSM946076   38.8  41.4

4.2 Age acceleration

However, in epidemiological studies one is interested in assessing whether age acceleration is associated with a given trait or condition. Three different measures can be computed:

  • ageAcc: Difference between DNAmAge and chronological age.
  • ageAcc2: Residuals obtained after regressing chronological age and DNAmAge (similar to IEAA).
  • ageAcc3: Residuals obtained after regressing chronological age and DNAmAge adjusted for cell counts (similar to EEAA).

All this estimates can be obtained for each clock when providing chronological age through age argument. This information is normally provided in a different file including different covariates (metadata or sample annotation data). In this example data are available at ‘SampleAnnotationExample55.csv’ file that is also available at methylclock package:

library(tidyverse)
path <- system.file("extdata", package = "methylclock")
covariates <- read_csv(file.path(path, "SampleAnnotationExample55.csv"))
covariates
  # A tibble: 16 × 14
     OriginalOrder id      title geo_accession TissueDetailed Tissue diseaseStatus
             <dbl> <chr>   <chr> <chr>         <chr>          <chr>          <dbl>
   1             3 GSM946… Auti… GSM946048     Fresh frozen … occip…             1
   2             4 GSM946… Cont… GSM946049     Fresh frozen … occip…             0
   3             7 GSM946… Auti… GSM946052     Fresh frozen … occip…             1
   4             9 GSM946… Auti… GSM946054     Fresh frozen … occip…             1
   5            10 GSM946… Auti… GSM946055     Fresh frozen … occip…             1
   6            11 GSM946… Auti… GSM946056     Fresh frozen … occip…             1
   7            14 GSM946… Cont… GSM946059     Fresh frozen … occip…             0
   8            17 GSM946… Cont… GSM946062     Fresh frozen … occip…             0
   9            19 GSM946… Auti… GSM946064     Fresh frozen … occip…             1
  10            20 GSM946… Auti… GSM946065     Fresh frozen … occip…             1
  11            21 GSM946… Auti… GSM946066     Fresh frozen … occip…             1
  12            22 GSM946… Cont… GSM946067     Fresh frozen … occip…             0
  13            28 GSM946… Cont… GSM946073     Fresh frozen … occip…             0
  14            29 GSM946… Cont… GSM946074     Fresh frozen … occip…             0
  15            30 GSM946… Cont… GSM946075     Fresh frozen … occip…             0
  16            31 GSM946… Cont… GSM946076     Fresh frozen … occip…             0
  # ℹ 7 more variables: Age <dbl>, PostMortemInterval <dbl>, CauseofDeath <chr>,
  #   individual <dbl>, Female <dbl>, Caucasian <lgl>, FemaleOriginal <lgl>

In this case, chronological age is available at Age column:

age <- covariates$Age
head(age)
  [1] 60 39 28 39  8 22

The different methylation clocks along with their age accelerated estimates can be simply computed by:

age.example55 <- DNAmAge(MethylationData, age=age, cell.count=TRUE)
  Warning in predAge(cpgs.imp, coefHannum, intercept = FALSE, min.perc): The number of missing CpGs forHannumclock exceeds 80%.
    ---> This DNAm clock will be NA.
   rows : 353 cols : 16
  Warning in predAge(cpgs.imp, coefSkin, intercept = TRUE, min.perc): The number of missing CpGs forSkinclock exceeds 80%.
    ---> This DNAm clock will be NA.
  Warning in predAge(cpgs.imp, coefPedBE, intercept = TRUE, min.perc): The number of missing CpGs forPedBEclock exceeds 80%.
    ---> This DNAm clock will be NA.
  Warning in predAge(cpgs.imp, coefTL, intercept = TRUE, min.perc): The number of missing CpGs forTLclock exceeds 80%.
    ---> This DNAm clock will be NA.
  Warning in predAge(cpgs.imp, coefBLUP, intercept = TRUE, min.perc): The number of missing CpGs forBLUPclock exceeds 80%.
    ---> This DNAm clock will be NA.
  Warning in predAge(cpgs.imp, coefEN, intercept = TRUE, min.perc): The number of missing CpGs forENclock exceeds 80%.
    ---> This DNAm clock will be NA.
age.example55
  # A tibble: 16 × 24
     id       Horvath ageAcc.Horvath ageAcc2.Horvath ageAcc3.Horvath Hannum Levine
     <chr>      <dbl>          <dbl>           <dbl>           <dbl> <lgl>   <dbl>
   1 GSM9460…   51.8          -8.22          -4.45            -4.91  NA      -30.3
   2 GSM9460…   39.8           0.754          2.00             1.59  NA      -29.6
   3 GSM9460…   26.4          -1.59          -1.67            -1.86  NA      -33.3
   4 GSM9460…   34.0          -5.00          -3.76            -0.463 NA      -36.0
   5 GSM9460…   10.1           2.06          -0.428            2.82  NA      -52.8
   6 GSM9460…   20.4          -1.61          -2.42            -2.88  NA      -42.2
   7 GSM9460…    6.00          2.00          -0.971           -0.827 NA      -44.8
   8 GSM9460…   34.6           6.65           6.57             5.32  NA      -23.2
   9 GSM9460…    7.91          2.91           0.0589          -2.61  NA      -49.8
  10 GSM9460…    4.72          2.72          -0.489            1.46  NA      -48.2
  11 GSM9460…   29.6          -0.427         -0.268           -1.37  NA      -39.9
  12 GSM9460…    1.38          0.375         -2.95            -2.19  NA      -48.3
  13 GSM9460…   56.0          -4.01          -0.242            1.62  NA      -26.7
  14 GSM9460…   24.0           2.03           1.23            -0.669 NA      -39.7
  15 GSM9460…    9.38          1.38          -1.11            -0.885 NA      -45.4
  16 GSM9460…   38.8           8.76           8.92             5.85  NA      -27.5
  # ℹ 17 more variables: ageAcc.Levine <dbl>, ageAcc2.Levine <dbl>,
  #   ageAcc3.Levine <dbl>, BNN <dbl>, ageAcc.BNN <dbl>, ageAcc2.BNN <dbl>,
  #   ageAcc3.BNN <dbl>, skinHorvath <lgl>, PedBE <lgl>, Wu <dbl>,
  #   ageAcc.Wu <dbl>, ageAcc2.Wu <dbl>, ageAcc3.Wu <dbl>, TL <lgl>, BLUP <lgl>,
  #   EN <lgl>, age <dbl>

By default, the argument cell.count is set equal to TRUE and, hence, can be omitted. This implies that ageAcc3 will be computed for all clocks. In some occassions this can be very time consuming. In such cases one can simply estimate DNAmAge, accAge and accAge2 by setting cell.count=FALSE. NOTE: see section 3.5 to see the reference panels available to estimate cell counts.

Then, we can investigate, for instance, whether the accelerated age is associated with Autism. In that example we will use a non-parametric test (NOTE: use t-test or linear regression for large sample sizes)

autism <- covariates$diseaseStatus
kruskal.test(age.example55$ageAcc.Horvath ~ autism)
  
    Kruskal-Wallis rank sum test
  
  data:  age.example55$ageAcc.Horvath by autism
  Kruskal-Wallis chi-squared = 1.3346, df = 1, p-value = 0.248
kruskal.test(age.example55$ageAcc2.Horvath ~ autism)
  
    Kruskal-Wallis rank sum test
  
  data:  age.example55$ageAcc2.Horvath by autism
  Kruskal-Wallis chi-squared = 3.1875, df = 1, p-value = 0.0742
kruskal.test(age.example55$ageAcc3.Horvath ~ autism)
  
    Kruskal-Wallis rank sum test
  
  data:  age.example55$ageAcc3.Horvath by autism
  Kruskal-Wallis chi-squared = 2.8235, df = 1, p-value = 0.09289

4.3 Chronological age prediction using ExpressionSet data

One may be interested in assessing association between chronologial age and DNA methylation age or evaluating how well chronological age is predicted by DNAmAge. In order to illustrate this analysis we downloaded data from GEO corresponding to a set of healthy individuals (GEO accession number GSE58045). Data can be retrieved into R by using GEOquery package as an ExpressionSet object that can be the input of our main function.

# To avoid connection buffer size 
Sys.setenv("VROOM_CONNECTION_SIZE" = 131072 * 10)

# Download data
dd <- GEOquery::getGEO("GSE58045")
gse58045 <- dd[[1]]

# Restore connection buffer size
Sys.setenv("VROOM_CONNECTION_SIZE" = 131072)
gse58045
  ExpressionSet (storageMode: lockedEnvironment)
  assayData: 27578 features, 172 samples 
    element names: exprs 
  protocolData: none
  phenoData
    sampleNames: GSM1399890 GSM1399891 ... GSM1400061 (172 total)
    varLabels: title geo_accession ... twin:ch1 (43 total)
    varMetadata: labelDescription
  featureData
    featureNames: cg00000292 cg00002426 ... cg27665659 (27578 total)
    fvarLabels: ID Name ... ORF (38 total)
    fvarMetadata: Column Description labelDescription
  experimentData: use 'experimentData(object)'
    pubMedIds: 22532803 
  Annotation: GPL8490

The chronological age is obtained by using pData function from Biobase package that is able to deal with ExpressionSet objects:

pheno <- pData(gse58045)
age <- as.numeric(pheno$`age:ch1`)

And the different DNA methylation age estimates are obtained by using DNAmAge function (NOTE: as there are missing values, the program automatically runs impute.knn function to get complete cases):

age.gse58045 <- DNAmAge(gse58045, age=age)
  Imputing missing data of the entire matrix .... 
  Data imputed. Starting DNAm clock estimation ...
  Warning in predAge(cpgs.imp, coefHannum, intercept = FALSE, min.perc): The number of missing CpGs forHannumclock exceeds 80%.
    ---> This DNAm clock will be NA.
   rows : 353 cols : 172
  Warning in predAge(cpgs.imp, coefSkin, intercept = TRUE, min.perc): The number of missing CpGs forSkinclock exceeds 80%.
    ---> This DNAm clock will be NA.
  Warning in predAge(cpgs.imp, coefPedBE, intercept = TRUE, min.perc): The number of missing CpGs forPedBEclock exceeds 80%.
    ---> This DNAm clock will be NA.
  Warning in predAge(cpgs.imp, coefTL, intercept = TRUE, min.perc): The number of missing CpGs forTLclock exceeds 80%.
    ---> This DNAm clock will be NA.
  Warning in predAge(cpgs.imp, coefBLUP, intercept = TRUE, min.perc): The number of missing CpGs forBLUPclock exceeds 80%.
    ---> This DNAm clock will be NA.
  Warning in predAge(cpgs.imp, coefEN, intercept = TRUE, min.perc): The number of missing CpGs forENclock exceeds 80%.
    ---> This DNAm clock will be NA.
age.gse58045
  # A tibble: 172 × 24
     id       Horvath ageAcc.Horvath ageAcc2.Horvath ageAcc3.Horvath Hannum Levine
     <chr>      <dbl>          <dbl>           <dbl>           <dbl> <lgl>   <dbl>
   1 GSM1399…    65.6          1.07            4.58            5.46  NA       50.7
   2 GSM1399…    66.3          0.197           4.06            5.06  NA       51.3
   3 GSM1399…    53.9         -5.31           -2.98           -2.42  NA       40.5
   4 GSM1399…    40.6         -5.23           -5.89           -6.14  NA       31.3
   5 GSM1399…    50.1          0.982           1.06            1.28  NA       41.1
   6 GSM1399…    63.7         -0.895           2.64            2.92  NA       48.1
   7 GSM1399…    44.7         -0.875          -1.59           -1.76  NA       29.2
   8 GSM1399…    59.7         -8.55           -4.20           -3.48  NA       41.0
   9 GSM1399…    48.4         -5.84           -4.63           -2.50  NA       43.8
  10 GSM1399…    59.3         -3.93           -0.719          -0.609 NA       46.1
  # ℹ 162 more rows
  # ℹ 17 more variables: ageAcc.Levine <dbl>, ageAcc2.Levine <dbl>,
  #   ageAcc3.Levine <dbl>, BNN <dbl>, ageAcc.BNN <dbl>, ageAcc2.BNN <dbl>,
  #   ageAcc3.BNN <dbl>, skinHorvath <lgl>, PedBE <lgl>, Wu <dbl>,
  #   ageAcc.Wu <dbl>, ageAcc2.Wu <dbl>, ageAcc3.Wu <dbl>, TL <lgl>, BLUP <lgl>,
  #   EN <lgl>, age <dbl>

Figure \(\ref{fig:horvath_age}\) shows the correlation between DNAmAge obtained from Horvath’s method and the chronological age, while Figure \(\ref{fig:bnn_age}\) depicts the correlation of a new method based on fitting a Bayesian Neural Network to predict DNAmAge based on Horvath’s CpGs.

plotDNAmAge(age.gse58045$Horvath, age)

plotDNAmAge(age.gse58045$BNN, age, tit="Bayesian Neural Network")

4.4 Use of DNAmAge in association studies

Let us illustrate how to use DNAmAge information in association studies (e.g case/control, smokers/non-smokers, responders/non-responders, …). GEO number GSE19711 contains transcriptomic and epigenomic data of a study in lung cancer. Data can be retrieved into R by

# To avoid connection buffer size 
Sys.setenv("VROOM_CONNECTION_SIZE" = 131072 * 10)

# Download data
dd <- GEOquery::getGEO("GSE19711")
gse19711 <- dd[[1]]

# Restore connection buffer size
Sys.setenv("VROOM_CONNECTION_SIZE" = 131072)

The object gse19711is an ExpressionSet that can contains CpGs and phenotypic (e.g clinical) information

gse19711
  ExpressionSet (storageMode: lockedEnvironment)
  assayData: 27578 features, 540 samples 
    element names: exprs 
  protocolData: none
  phenoData
    sampleNames: GSM491937 GSM491938 ... GSM492476 (540 total)
    varLabels: title geo_accession ... stage:ch1 (58 total)
    varMetadata: labelDescription
  featureData
    featureNames: cg00000292 cg00002426 ... cg27665659 (27578 total)
    fvarLabels: ID Name ... ORF (38 total)
    fvarMetadata: Column Description labelDescription
  experimentData: use 'experimentData(object)'
    pubMedIds: 20219944 
  Annotation: GPL8490

Let us imagine we are interested in comparing the accelerated age between cases and controls. Age and case/control status information can be obtained by:

pheno <- pData(gse19711)
age <- as.numeric(pheno$`ageatrecruitment:ch1`)
disease <- pheno$`sample type:ch1`
table(disease)
  disease
     bi-sulphite converted genomic whole blood DNA from Case 
                                                         266 
  bi-sulphite converted genomic whole blood DNA from Control 
                                                         274
disease[grep("Control", disease)] <- "Control"
disease[grep("Case", disease)] <- "Case"
disease <- factor(disease, levels=c("Control", "Case"))
table(disease)
  disease
  Control    Case 
      274     266

The DNAmAge estimates of different methods is computed by

age.gse19711 <- DNAmAge(gse19711, age=age)
  Imputing missing data of the entire matrix .... 
  Data imputed. Starting DNAm clock estimation ...
  Warning in predAge(cpgs.imp, coefHannum, intercept = FALSE, min.perc): The number of missing CpGs forHannumclock exceeds 80%.
    ---> This DNAm clock will be NA.
   rows : 353 cols : 540
  Warning in predAge(cpgs.imp, coefSkin, intercept = TRUE, min.perc): The number of missing CpGs forSkinclock exceeds 80%.
    ---> This DNAm clock will be NA.
  Warning in predAge(cpgs.imp, coefPedBE, intercept = TRUE, min.perc): The number of missing CpGs forPedBEclock exceeds 80%.
    ---> This DNAm clock will be NA.
  Warning in predAge(cpgs.imp, coefTL, intercept = TRUE, min.perc): The number of missing CpGs forTLclock exceeds 80%.
    ---> This DNAm clock will be NA.
  Warning in predAge(cpgs.imp, coefBLUP, intercept = TRUE, min.perc): The number of missing CpGs forBLUPclock exceeds 80%.
    ---> This DNAm clock will be NA.
  Warning in predAge(cpgs.imp, coefEN, intercept = TRUE, min.perc): The number of missing CpGs forENclock exceeds 80%.
    ---> This DNAm clock will be NA.

We can observe there are missing data. The funcion automatically impute those using impute.knn function from impute package since complete cases are required to compute the different methylation clocks. The estimates are:

age.gse19711
  # A tibble: 540 × 24
     id       Horvath ageAcc.Horvath ageAcc2.Horvath ageAcc3.Horvath Hannum Levine
     <chr>      <dbl>          <dbl>           <dbl>           <dbl> <lgl>   <dbl>
   1 GSM4919…    62.9          -5.14          -0.351          -1.10  NA       61.1
   2 GSM4919…    68.8         -12.2           -2.85           -2.13  NA       57.0
   3 GSM4919…    60.0           3.96           4.54            4.37  NA       43.0
   4 GSM4919…    57.9          -4.13          -1.45           -1.38  NA       40.9
   5 GSM4919…    59.0         -13.0           -6.79           -6.98  NA       57.0
   6 GSM4919…    57.0          -4.00          -1.66           -1.09  NA       44.7
   7 GSM4919…    61.9          -3.08           0.657           0.183 NA       47.9
   8 GSM4919…    59.1         -11.9           -6.07           -5.53  NA       50.0
   9 GSM4919…    60.7         -16.3           -8.33           -9.33  NA       47.7
  10 GSM4919…    51.1          -7.93          -6.30           -6.33  NA       52.5
  # ℹ 530 more rows
  # ℹ 17 more variables: ageAcc.Levine <dbl>, ageAcc2.Levine <dbl>,
  #   ageAcc3.Levine <dbl>, BNN <dbl>, ageAcc.BNN <dbl>, ageAcc2.BNN <dbl>,
  #   ageAcc3.BNN <dbl>, skinHorvath <lgl>, PedBE <lgl>, Wu <dbl>,
  #   ageAcc.Wu <dbl>, ageAcc2.Wu <dbl>, ageAcc3.Wu <dbl>, TL <lgl>, BLUP <lgl>,
  #   EN <lgl>, age <dbl>

The association between disease status and DNAmAge estimated using Horvath’s method can be computed by

mod.horvath1 <- glm(disease ~ ageAcc.Horvath , 
                    data=age.gse19711,
                    family="binomial")
summary(mod.horvath1)
  
  Call:
  glm(formula = disease ~ ageAcc.Horvath, family = "binomial", 
      data = age.gse19711)
  
  Coefficients:
                 Estimate Std. Error z value Pr(>|z|)  
  (Intercept)    -0.10995    0.09771  -1.125   0.2605  
  ageAcc.Horvath -0.02023    0.01154  -1.753   0.0795 .
  ---
  Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
  
  (Dispersion parameter for binomial family taken to be 1)
  
      Null deviance: 748.48  on 539  degrees of freedom
  Residual deviance: 745.25  on 538  degrees of freedom
  AIC: 749.25
  
  Number of Fisher Scoring iterations: 4
mod.skinHorvath <- glm(disease ~ ageAcc2.Horvath , 
                       data=age.gse19711,
                       family="binomial")
summary(mod.skinHorvath)
  
  Call:
  glm(formula = disease ~ ageAcc2.Horvath, family = "binomial", 
      data = age.gse19711)
  
  Coefficients:
                  Estimate Std. Error z value Pr(>|z|)
  (Intercept)     -0.02970    0.08617  -0.345    0.730
  ageAcc2.Horvath -0.01315    0.01209  -1.087    0.277
  
  (Dispersion parameter for binomial family taken to be 1)
  
      Null deviance: 748.48  on 539  degrees of freedom
  Residual deviance: 747.27  on 538  degrees of freedom
  AIC: 751.27
  
  Number of Fisher Scoring iterations: 3
mod.horvath3 <- glm(disease ~ ageAcc3.Horvath , 
                    data=age.gse19711,
                    family="binomial")
summary(mod.horvath3)
  
  Call:
  glm(formula = disease ~ ageAcc3.Horvath, family = "binomial", 
      data = age.gse19711)
  
  Coefficients:
                  Estimate Std. Error z value Pr(>|z|)
  (Intercept)     -0.02993    0.08626  -0.347    0.729
  ageAcc3.Horvath -0.01927    0.01283  -1.502    0.133
  
  (Dispersion parameter for binomial family taken to be 1)
  
      Null deviance: 748.48  on 539  degrees of freedom
  Residual deviance: 746.13  on 538  degrees of freedom
  AIC: 750.13
  
  Number of Fisher Scoring iterations: 4

We do not observe statistical significant association between age acceleration estimated using Horvath method and the risk of developing lung cancer. It is worth to notice that Horvath’s clock was created to predict chronological age and the impact of age acceleration of this clock on disease may be limited. On the other hand, Levine’s clock aimed to distinguish risk between same-aged individuals. Let us evaluate whether this age acceleration usin Levine’s clock is associated with lung cancer

mod.levine1 <- glm(disease ~ ageAcc.Levine , data=age.gse19711,
                    family="binomial")
summary(mod.levine1)
  
  Call:
  glm(formula = disease ~ ageAcc.Levine, family = "binomial", data = age.gse19711)
  
  Coefficients:
                Estimate Std. Error z value Pr(>|z|)   
  (Intercept)    0.40956    0.17894   2.289  0.02209 * 
  ageAcc.Levine  0.03178    0.01133   2.806  0.00502 **
  ---
  Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
  
  (Dispersion parameter for binomial family taken to be 1)
  
      Null deviance: 748.48  on 539  degrees of freedom
  Residual deviance: 740.17  on 538  degrees of freedom
  AIC: 744.17
  
  Number of Fisher Scoring iterations: 4
mod.levine2 <- glm(disease ~ ageAcc2.Levine , data=age.gse19711,
                    family="binomial")
summary(mod.levine2)
  
  Call:
  glm(formula = disease ~ ageAcc2.Levine, family = "binomial", 
      data = age.gse19711)
  
  Coefficients:
                 Estimate Std. Error z value Pr(>|z|)    
  (Intercept)    -0.02925    0.08718  -0.336 0.737225    
  ageAcc2.Levine  0.04430    0.01234   3.589 0.000332 ***
  ---
  Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
  
  (Dispersion parameter for binomial family taken to be 1)
  
      Null deviance: 748.48  on 539  degrees of freedom
  Residual deviance: 734.49  on 538  degrees of freedom
  AIC: 738.49
  
  Number of Fisher Scoring iterations: 4
mod.levine3 <- glm(disease ~ ageAcc3.Levine , data=age.gse19711,
                    family="binomial")
summary(mod.levine3)
  
  Call:
  glm(formula = disease ~ ageAcc3.Levine, family = "binomial", 
      data = age.gse19711)
  
  Coefficients:
                 Estimate Std. Error z value Pr(>|z|)
  (Intercept)    -0.02962    0.08622  -0.344    0.731
  ageAcc3.Levine  0.01679    0.01244   1.350    0.177
  
  (Dispersion parameter for binomial family taken to be 1)
  
      Null deviance: 748.48  on 539  degrees of freedom
  Residual deviance: 746.62  on 538  degrees of freedom
  AIC: 750.62
  
  Number of Fisher Scoring iterations: 3

Here we observe as the risk of developing lung cancer increases 3.23 percent per each unit in the age accelerated variable (ageAcc). Similar conclusion is obtained when using ageAcc2 and ageAcc3 variables.

In some occasions cell composition should be used to assess association. This information is calculated in DNAmAge function and it can be incorporated in the model by:

cell <- attr(age.gse19711, "cell_proportion")
mod.cell <- glm(disease ~ ageAcc.Levine + cell, data=age.gse19711,
                    family="binomial")
summary(mod.cell)
  
  Call:
  glm(formula = disease ~ ageAcc.Levine + cell, family = "binomial", 
      data = age.gse19711)
  
  Coefficients:
                 Estimate Std. Error z value Pr(>|z|)    
  (Intercept)   -9.768206   4.380382  -2.230 0.025748 *  
  ageAcc.Levine  0.003959   0.012208   0.324 0.745746    
  cellCD4T      -3.339693   3.833531  -0.871 0.383656    
  cellMono      10.165096   4.594096   2.213 0.026922 *  
  cellNeu       16.319534   4.584745   3.560 0.000372 ***
  cellNK        -0.882134   4.296498  -0.205 0.837326    
  ---
  Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
  
  (Dispersion parameter for binomial family taken to be 1)
  
      Null deviance: 748.48  on 539  degrees of freedom
  Residual deviance: 686.56  on 534  degrees of freedom
  AIC: 698.56
  
  Number of Fisher Scoring iterations: 4

Here we observe as the positive association disapears after adjusting for cell counts.

4.5 Use of DNAm age in children

dd <- GEOquery::getGEO("GSE109446")
gse109446 <- dd[[1]]
controls <- pData(gse109446)$`diagnosis:ch1`=="control"
gse <- gse109446[,controls]
age <- as.numeric(pData(gse)$`age:ch1`)
age.gse <- DNAmAge(gse, age=age)
   rows : 353 cols : 29
plotCorClocks(age.gse)