systemPipeR: Workflow Management and Report Generation Environment
Last update: 24 October, 2023
Package
systemPipeR 2.8.0
1 Introduction
systemPipeR is a multipurpose data analysis workflow environment that unifies R with command-line tools (H Backman and Girke 2016). It enables scientists to analyze many types of large- or small-scale data on local or distributed computer systems with a high level of reproducibility, scalability and portability (Figure 1). At its core is a command-line interface (CLI) that adopts the Common Workflow Language (CWL, Crusoe et al. (2021)). This design allows users to choose for each analysis step the optimal R or command-line software. It supports both end-to-end and partial execution of workflows with built-in restart functionalities. Efficient management of complex analysis tasks is accomplished by a flexible workflow control container class (SYSargsList). Handling of large numbers of input samples and experimental designs is facilitated by consistent sample annotation mechanisms. As a multi-purpose workflow toolkit, systemPipeR enables users to run existing workflows, customize them or design entirely new ones while taking advantage of widely adopted data structures within the Bioconductor ecosystem. Another important core functionality is the generation of reproducible scientific analysis and technical reports. For result interpretation, systemPipeR offers a wide range of plotting functionality, while an associated Shiny App offers many useful functionalities for interactive result exploration.
Figure 1: Relevant features in systemPipeR
Workflow design concepts are illustrated under (A). Examples of systemPipeR's visualization functionalities are given under (B).
systemPipeR's CWL interface provides two
options to run command-line tools and workflows based on CWL. First, one can
run CWL in its native way via an R-based wrapper utility for cwl-runner or
cwl-tools (CWL-based approach). Second, one can run workflows using CWL’s
command-line and workflow instructions from within R (R-based approach). In the
latter case the same CWL workflow definition files (e.g. *.cwl and *.yml)
are used but rendered and executed entirely with R functions defined by
systemPipeR, and thus use CWL mainly as a command-line and workflow
definition format rather than execution software to run workflows. In this regard
systemPipeR also provides several convenience functions that are useful for
designing and debugging workflows, such as a command-line rendering function to
retrieve the exact command-line strings for each step prior to running a command-line.
Auto-generation of CWL parameter files is also supported, where
users can simply provide the command-line strings new software to a function and
the corresponding *.cwl and *.yml are generated for them.
Figure 2: Overview of systemPipeR workflows management instances
A) A typical analysis workflow requires multiple software tools (red), as well the description of the input (green) and output files, including analysis reports (purple). B) systemPipeR provides multiple utilities to design and build a workflow, allowing multi-instance, integration of R code and command-line software, a simple and efficient annotation system, that allows automatic control of the input and output data, and multiple resources to manage the entire workflow. c) Options are provided to execute single or multiple workflow steps, while enabling scalability, checkpoints, and generation of technical and scientific reports.
1.1 Workflow Management with SYSargsList
The SYSargsList S4 class is a list-like container that stores the paths to
all input and output files along with the corresponding parameters used in each
analysis step (see Figure 3). SYSargsList instances are constructed from an
optional targets files, and two CWL parameter files including *.cwl and
*.yml (for details, see below). When running preconfigured NGS workflows, the
only input the user needs to provide is the initial targets file containing the
paths to the input files (e.g., FASTQ) and experiment design information, such
as sample labels and biological replicates. Subsequent targets instances are
created automatically, based on the connectivity establish between each
workflow step. SYSargsList containers store all information required for
one or multiple steps. This establishes central control for running, monitoring
and debugging complex workflows from start to finish.
Figure 3: Workflow steps with input/output file operations are controlled by the SYSargsList container
Each of its components (SYSargs2) are constructed from an optional targets and two param files. Alternatively, LineWise instances containing pure R code can be used.
1.2 Command-line software support
systemPipeR adopted the widely used community standard Common Workflow
Language (CWL) (Amstutz et al. 2016) for describing command-line tools and workflows
in a declarative, generic, and reproducible manner. CWL specifications are
text-based files and can be structured using YAML (https://yaml.org/) syntax.
Therefore, the description files can be easily accessed and are readable.
The significant advantage of adopting CWL as a standard description of
command-line tools within is the flexibility of workflow
reusability for different computing environments and workflow frameworks in the
community, improving reproducibility, portability, and shareability between
collaborators and community.
Following the CWL Command Line Tool Description Specification (https://www.commonwl.org/v1.2/CommandLineTool.html), the basic elements of the CWL tool description are defined in two files. Figure 4A-B illustrate the “hello world” example. The main file contains all the information necessary to build the command-line that will be executed, specifying the input, expected output files, and arguments for the command-line (Figure 4A). The second file is optional yet provides flexibility to assign values to parameters required to make the input or output objects when building the command-line.
Figure 4: Example of ‘Hello World’ message using CWL syntax and demonstrating the connectivity with systemPipeR
(A) This file describes the command-line tool, here using ‘echo’ command. (B) This file describes all the parameters variables connected with the tool specification file. Here the reference value of the input parameter can be specific or can be filled dynamically, adding a variable that connects with the targets files from systemPipeR. (C) SYSargsList function provides the ‘inputvars’ arguments to build the connectivity between the CWL description of parameters and the targets files. The argument requires a named vector where each vector element is required to be defined in the CWL description of parameters file (B), and the names of the elements are needed to match the column names defined in the targets file (D).
2 Getting Started
2.1 Installation
systemPipeR
environment can be installed from the R console using the BiocManager::install
command. The associated data package systemPipeRdata
can be installed the same way. The latter is a helper package for generating systemPipeR
workflow environments with a single command containing all parameter files and
sample data required to quickly test and run workflows.
if (!requireNamespace("BiocManager", quietly=TRUE)) install.packages("BiocManager")
BiocManager::install("systemPipeR")
BiocManager::install("systemPipeRdata")Please note that if you desire to use a third-party command-line tool, the particular tool and dependencies need to be installed and exported in your PATH. See details.
2.2 Loading package and documentation
library("systemPipeR") # Loads the package
library(help="systemPipeR") # Lists package info
vignette("systemPipeR") # Opens vignette2.3 How to get help for systemPipeR
All questions about the package or any particular function should be posted to the Bioconductor support site https://support.bioconductor.org.
Please add the “systemPipeR” tag to your question, and the package authors will
automatically receive an alert.
We appreciate receiving reports of bugs in the functions or documentation and suggestions for improvement. For that, please consider opening an issue at GitHub.
3 Project structure
systemPipeR expects a project directory structure that consists of a directory
where users may store all the raw data, the results directory that will be reserved
for all the outfiles files or new output folders, and the parameters directory.
This structure allows reproducibility and collaboration across the data science team since internally relative paths are used. Users could transfer this project to a different location and still be able to run the entire workflow. Also, it increases efficiency and data management once the raw data is kept in a separate folder and avoids duplication.
3.0.1 Load sample data and workflow templates
The mini sample FASTQ files used by this overview vignette as well as the
associated workflow reporting vignettes can be loaded via the
systemPipeRdata package as shown below. The chosen data set
SRP010938 obtains 18
paired-end (PE) read sets from Arabidposis thaliana (Howard et al. 2013). To
minimize processing time during testing, each FASTQ file has been subsetted to
90,000-100,000 randomly sampled PE reads that map to the first 100,000
nucleotides of each chromosome of the A. thalina genome. The corresponding
reference genome sequence (FASTA) and its GFF annotation files (provided in the
same download) have been truncated accordingly. This way the entire test sample
data set requires less than 200MB disk storage space. A PE read set has been
chosen for this test data set for flexibility, because it can be used for
testing both types of analysis routines requiring either SE (single-end) reads
or PE reads.
The following generates a fully populated systemPipeR workflow environment
(here for RNA-Seq) in the current working directory of an R session. At this time
the package includes workflow templates for RNA-Seq, ChIP-Seq, VAR-Seq, and Ribo-Seq.
Templates for additional NGS applications will be provided in the future.
3.1 Directory Structure
systemPipeRdata, helper package, provides pre-configured workflows, reporting
templates, and sample data loaded as demonstrated below. With a single command,
the package allows creating the workflow environment containing the structure
described here (see Figure 5).
genWorkenvir(workflow="rnaseq")
setwd("rnaseq")Directory names are indicated in green. Users can change this structure as needed, but need to adjust the code in their workflows accordingly.
- workflow/ (e.g. myproject/)
- This is the root directory of the R session running the workflow.
- Run script ( *.Rmd) and sample annotation (targets.txt) files are located here.
- Note, this directory can have any name (e.g. myproject). Changing its name does not require any modifications in the run script(s).
- Important subdirectories:
- param/
- param/cwl/: This subdirectory stores all the parameter and configuration files. To organize workflows, each can have its own subdirectory, where all
*.cwland*input.ymlfiles need to be in the same subdirectory.
- param/cwl/: This subdirectory stores all the parameter and configuration files. To organize workflows, each can have its own subdirectory, where all
- data/
- Raw data (e.g. FASTQ files)
- FASTA file of reference (e.g. reference genome)
- Annotation files
- Metadata
- etc.
- results/
- Analysis results are usually written to this directory, including: alignment, variant and peak files (BAM, VCF, BED); tabular result files; and image/plot files.
- Note, the user has the option to organize results files for a given sample and analysis step in a separate subdirectory.
- param/
Figure 5: systemPipeR’s preconfigured directory structure
The following parameter files are included in each workflow template:
targets.txt: initial one provided by user; downstreamtargets_*.txtfiles are generated automatically*.param/cwl: defines parameter for input/output file operations, e.g.:hisat2/hisat2-mapping-se.cwlhisat2/hisat2-mapping-se.yml
- Configuration files for computer cluster environments (skip on single machines):
.batchtools.conf.R: defines the type of scheduler forbatchtoolspointing to template file of cluster, and located in user’s home directorybatchtools.*.tmpl: specifies parameters of scheduler used by a system, e.g. Torque, SGE, Slurm, etc.
3.2 Structure of initial targets file
The targets file defines all input files (e.g. FASTQ, BAM, BCF) and sample
comparisons of an analysis workflow. It can, also, store any number of descriptive
information for each sample used in the workflow.
The following shows the format of a sample targets file included in the
package. It also can be viewed and downloaded
from systemPipeR’s GitHub repository here.
Please note that here it is represented a tabular file, however systemPipeR can
import the inputs information from a YAML files, as well as
SummarizedExperiment object. For more details on how to create custom targets,
please find here.
Users should note here, the usage of targets files is optional when using
systemPipeR's new workflow management interface. They can be replaced by a standard YAML
input file used by CWL. Since for organizing experimental variables targets
files are extremely useful and user-friendly. Thus, we encourage users to keep using
them.
3.2.1 Structure of targets file for single-end (SE) samples
In a target file with a single type of input files, here FASTQ files of
single-end (SE) reads, the first column describe the path and the second column
represents a unique id name for each sample. The third column called Factor
represents the biological replicates. All subsequent columns are additional
information, and any number of extra columns can be added as needed.
targetspath <- system.file("extdata", "targets.txt", package = "systemPipeR")
showDF(read.delim(targetspath, comment.char = "#"))## Loading required namespace: DTTo work with custom data, users need to generate a targets file containing
the paths to their own FASTQ files and then provide under targetspath the
path to the corresponding targets file.
3.2.2 Structure of targets file for paired-end (PE) samples
For paired-end (PE) samples, the structure of the targets file is similar, where
users need to provide two FASTQ path columns: FileName1 and FileName2
with the paths to the PE FASTQ files.
targetspath <- system.file("extdata", "targetsPE.txt", package = "systemPipeR")
showDF(read.delim(targetspath, comment.char = "#"))3.2.3 Sample comparisons
Sample comparisons are defined in the header lines of the targets file
starting with ‘# <CMP>’.
readLines(targetspath)[1:4]## [1] "# Project ID: Arabidopsis - Pseudomonas alternative splicing study (SRA: SRP010938; PMID: 24098335)"
## [2] "# The following line(s) allow to specify the contrasts needed for comparative analyses, such as DEG identification. All possible comparisons can be specified with 'CMPset: ALL'."
## [3] "# <CMP> CMPset1: M1-A1, M1-V1, A1-V1, M6-A6, M6-V6, A6-V6, M12-A12, M12-V12, A12-V12"
## [4] "# <CMP> CMPset2: ALL"The function readComp imports the comparison information and stores it in a
list. Alternatively, readComp can obtain the comparison information from
the corresponding SYSargsList step (see below). Note, these header lines are
optional. They are mainly useful for controlling comparative analyses according
to certain biological expectations, such as identifying differentially expressed
genes in RNA-Seq experiments based on simple pair-wise comparisons.
readComp(file = targetspath, format = "vector", delim = "-")## $CMPset1
## [1] "M1-A1" "M1-V1" "A1-V1" "M6-A6" "M6-V6" "A6-V6" "M12-A12" "M12-V12" "A12-V12"
##
## $CMPset2
## [1] "M1-A1" "M1-V1" "M1-M6" "M1-A6" "M1-V6" "M1-M12" "M1-A12" "M1-V12" "A1-V1"
## [10] "A1-M6" "A1-A6" "A1-V6" "A1-M12" "A1-A12" "A1-V12" "V1-M6" "V1-A6" "V1-V6"
## [19] "V1-M12" "V1-A12" "V1-V12" "M6-A6" "M6-V6" "M6-M12" "M6-A12" "M6-V12" "A6-V6"
## [28] "A6-M12" "A6-A12" "A6-V12" "V6-M12" "V6-A12" "V6-V12" "M12-A12" "M12-V12" "A12-V12"3.3 Downstream targets files description
After the step which required the initial targets file information, the downstream
targets files are created automatically (see Figure 6).
Each step that uses the previous step outfiles as an input, the new targets input
will be managed internally by the workflow instances, establishing connectivity
among the steps in the workflow.
systemPipeR provides features to automatically and systematically build this
connection, providing security that all the samples will be managed efficiently
and reproducibly.
Figure 6: systemPipeR automatically creates the downstream targets files based on the previous steps outfiles
A) Usually, users provide the initial targets files, and this step will generate some outfiles, as demonstrated on B. Then, those files are used to build the new targets files as inputs in the next step. systemPipeR (C) manages this connectivity among the steps automatically for the users.
3.4 Structure of the new parameters files
The parameters and configuration required for running command-line software are
provided by the widely used community standard Common Workflow Language (CWL)
(Amstutz et al. 2016), which describes parameters analysis workflows in a generic
and reproducible manner. For R-based workflow steps, param files are not required.
For a complete overview of the CWL syntax, please see the section below.
Also, we have a dedicated section explain how to systemPipeR establish the
connection between the CWL parameters files and the targets files. Please see here.
4 Quick Start
This section will demonstrate how to build a basic workflow. The main features
will be briefly illustrated here. The following section will discuss all the
alternatives to design and build the workflow and the support features available
in systemPipeR.
- Load sample data and directory structure
systemPipeRdata package is a helper package to generate a fully populated systemPipeR workflow environment in the current working directory with a single command. All the instruction for generating the workflow are provide in the systemPipeRdata vignette here.
systemPipeRdata::genWorkenvir(workflow = "new", mydirname = "spr_project")## [1] "Generated spr_project directory. Next run in new directory, the R code from *.Rmd template interactively. Alternatively, workflows can be exectued with a single command as instructed in the vignette."setwd("spr_project")Typically, the user wants to record here the sources and versions of the
reference genome sequence along with the corresponding annotations. In
the provided sample data set all data inputs are stored in a data
subdirectory and all results will be written to a separate results directory,
while the Rmarkdown workflow file and the targets file are expected to be
located in the parent directory.
- Create a project
systemPipeR workflows can be designed and built from start to finish with a
single command, importing from an R Markdown file or stepwise in interactive
mode from the R console.
To create a Workflow within systemPipeR, we can start by defining an empty
container and checking the directory structure:
sal <- SPRproject() ## Creating directory '/tmp/RtmpUy9Tuw/Rbuild3aef6f23436e71/systemPipeR/vignettes/spr_project/.SPRproject'
## Creating file '/tmp/RtmpUy9Tuw/Rbuild3aef6f23436e71/systemPipeR/vignettes/spr_project/.SPRproject/SYSargsList.yml'- Build workflow from RMarkdown file
The workflow can be created by adding all the analysis steps interact or importing
the steps from an R Markdown file.
After initializing the project with SPRproject function, importWF function
will scan and import all the R chunks from the R Markdown file and build all
the workflow instances. Then, each R chuck in the file will be converted in a workflow step.
sal <- importWF(sal,
file_path = system.file("extdata", "spr_simple_wf.Rmd", package = "systemPipeR"),
verbose = FALSE)## Now check if required tools are installed
## Check if they are in path:
## Checking path for gzip
## PASS
## Checking path for gunzip
## PASS
## step_name tool in_path
## 1 gzip gzip TRUE
## 2 gunzip gunzip TRUE
## All required tools in PATH, skip module check. If you want to check modules use `listCmdModules`This workflow contains five steps. First, it loads systemPipeR library, then
exports iris data set, separating each species’ data in a specific file.
In the third step, each one of those files will be compressed using gzip
command line, and later these files will be decompressed. Even though each step
is a straightforward process, it is a simple demonstration of the connectivity
between command-line and R-based analysis steps. Finally, the last step will
calculate a mean for sepal length and width and petal length and width, respectively,
and plot these statistics.
- Running workflow
Interactive job submissions in a single machine
For running the workflow, runWF function will execute all the steps store in
the workflow container. The execution will be on a single machine without
submitting to a queuing system of a computer cluster.
sal <- runWF(sal)## Running Step: load_library
## Running Session: Management
##
|
| | 0%
|
|==========================================================================================| 100%
## Step Status: Success
## Running Step: export_iris
## Running Session: Management
##
|
| | 0%
|
|==========================================================================================| 100%
## Step Status: Success
## Running Step: gzip
## Running Session: Management
##
|
| | 0%
|
|============================== | 33%
|
|============================================================ | 67%
|
|==========================================================================================| 100%
## ---- Summary ----
## Targets Total_Files Existing_Files Missing_Files gzip
## SE SE 1 1 0 Success
## VE VE 1 1 0 Success
## VI VI 1 1 0 Success
##
## Step Status: Success
## Running Step: gunzip
## Running Session: Management
##
|
| | 0%
|
|============================== | 33%
|
|============================================================ | 67%
|
|==========================================================================================| 100%
## ---- Summary ----
## Targets Total_Files Existing_Files Missing_Files gunzip
## SE SE 1 1 0 Success
## VE VE 1 1 0 Success
## VI VI 1 1 0 Success
##
## Step Status: Success
## Running Step: stats
## Running Session: Management
##
|
| | 0%
|
|==========================================================================================| 100%
## Step Status: Success
## Done with workflow running, now consider rendering logs & reports
## To render logs, run: sal <- renderLogs(sal)
## From command-line: Rscript -e "sal = systemPipeR::SPRproject(resume = TRUE); sal = systemPipeR::renderLogs(sal)"
## To render reports, run: sal <- renderReport(sal)
## From command-line: Rscript -e "sal= s ystemPipeR::SPRproject(resume = TRUE); sal = systemPipeR::renderReport(sal)"
## This message is displayed once per R session- Visualize workflow
systemPipeR workflows instances can be visualized with the plotWF function.
plotWF(sal, width = "80%", rstudio = TRUE)- Checking workflow status
To check the summary of the workflow, we can use:
statusWF(sal)## $load_library
## DataFrame with 1 row and 2 columns
## Step Status
## <character> <character>
## 1 load_library Success
##
## $export_iris
## DataFrame with 1 row and 2 columns
## Step Status
## <character> <character>
## 1 export_iris Success
##
## $gzip
## DataFrame with 3 rows and 5 columns
## Targets Total_Files Existing_Files Missing_Files gzip
## <character> <numeric> <numeric> <numeric> <matrix>
## SE SE 1 1 0 Success
## VE VE 1 1 0 Success
## VI VI 1 1 0 Success
##
## $gunzip
## DataFrame with 3 rows and 5 columns
## Targets Total_Files Existing_Files Missing_Files gunzip
## <character> <numeric> <numeric> <numeric> <matrix>
## SE SE 1 1 0 Success
## VE VE 1 1 0 Success
## VI VI 1 1 0 Success
##
## $stats
## DataFrame with 1 row and 2 columns
## Step Status
## <character> <character>
## 1 stats Success- Accessing logs report
systemPipeR compiles all the workflow execution logs in one central location,
making it easier to check any standard output (stdout) or standard error
(stderr) for any command-line tools used on the workflow or the R code stdout.
sal <- renderLogs(sal)5 Project initialization
To create a workflow within systemPipeR, we can start by defining an empty
container and checking the directory structure:
sal <- SPRproject(projPath = getwd(), overwrite = TRUE) ## Creating directory '/tmp/RtmpUy9Tuw/Rbuild3aef6f23436e71/systemPipeR/vignettes/spr_project/.SPRproject'
## Creating file '/tmp/RtmpUy9Tuw/Rbuild3aef6f23436e71/systemPipeR/vignettes/spr_project/.SPRproject/SYSargsList.yml'Internally, SPRproject function will create a hidden folder called .SPRproject,
by default, to store all the log files.
A YAML file, here called SYSargsList.yml, has been created, which initially
contains the basic location of the project structure; however, every time the
workflow object sal is updated in R, the new information will also be store in this
flat-file database for easy recovery.
If you desire different names for the logs folder and the YAML file, these can
be modified as follows:
sal <- SPRproject(logs.dir= ".SPRproject", sys.file=".SPRproject/SYSargsList.yml") Also, this function will check and/or create the basic folder structure if missing,
which means data, param, and results folder, as described here.
If the user wants to use a different names for these directories, can be specified
as follows:
sal <- SPRproject(data = "data", param = "param", results = "results") It is possible to separate all the R objects created within the workflow analysis
from the current environment. SPRproject function provides the option to create
a new environment, and in this way, it is not overwriting any object you may want
to have at your current section.
sal <- SPRproject(envir = new.env()) In this stage, the object sal is a empty container, except for the project information. The project information can be accessed by the projectInfo method:
sal## Instance of 'SYSargsList':
## No workflow steps addedprojectInfo(sal)## $project
## [1] "/tmp/RtmpUy9Tuw/Rbuild3aef6f23436e71/systemPipeR/vignettes/spr_project"
##
## $data
## [1] "data"
##
## $param
## [1] "param"
##
## $results
## [1] "results"
##
## $logsDir
## [1] ".SPRproject"
##
## $sysargslist
## [1] ".SPRproject/SYSargsList.yml"Also, the length function will return how many steps this workflow contains,
and in this case, it is empty, as follow:
length(sal)## [1] 06 Workflow Design
systemPipeR workflows can be designed and built from start to finish with a single command, importing from an R Markdown file or stepwise in interactive mode from the R console.
In the next section, we will demonstrate how to build the workflow in an interactive mode, and in the following section, we will show how to build from a file.
New workflows are constructed, or existing ones modified, by connecting each step
via appendStep method. Each SYSargsList instance contains instructions needed
for processing a set of input files with a specific command-line and the paths to
the corresponding outfiles generated.
The constructor function Linewise is used to build the R code-based step.
For more details about this S4 class container, see here.
6.1 Build workflow interactive
This tutorial shows a straightforward example for describing and explaining all main features available within systemPipeR to design, build, manage, run, and visualize the workflow. In summary, we are exporting a dataset to multiple files, compressing and decompressing each one of the files, importing to R, and finally performing a statistical analysis.
In the previous section, we initialize the project by building the sal object.
Until this moment, the container has no steps:
sal## Instance of 'SYSargsList':
## No workflow steps addedNext, we need to populate the object created with the first step in the workflow.
6.1.1 Adding the first step
The first step is R code based, and we are splitting the iris dataset by Species
and for each Species will be saved on file. Please note that this code will
not be executed now; it is just store in the container for further execution.
This constructor function requires the step_name and the R-based code under
the code argument.
The R code should be enclosed by braces ({}) and separated by a new line.
appendStep(sal) <- LineWise(code = {
mapply(function(x, y) write.csv(x, y),
split(iris, factor(iris$Species)),
file.path("results", paste0(names(split(iris, factor(iris$Species))), ".csv"))
)
},
step_name = "export_iris")For a brief overview of the workflow, we can check the object as follows:
sal## Instance of 'SYSargsList':
## WF Steps:
## 1. export_iris --> Status: Pending
## Also, for printing and double-check the R code in the step, we can use the
codeLine method:
codeLine(sal)## export_iris
## mapply(function(x, y) write.csv(x, y), split(iris, factor(iris$Species)), file.path("results", paste0(names(split(iris, factor(iris$Species))), ".csv")))6.1.2 Adding more steps
Next, an example of how to compress the exported files using
gzip command-line.
The constructor function creates an SYSargsList S4 class object using data from
three input files:
- CWL command-line specification file (`wf_file` argument);
- Input variables (`input_file` argument);
- Targets file (`targets` argument).In CWL, files with the extension .cwl define the parameters of a chosen
command-line step or workflow, while files with the extension .yml define the
input variables of command-line steps.
The targets file is optional for workflow steps lacking input files. The connection
between input variables and the targets file is defined under the inputvars
argument. It is required a named vector, where each element name needs to match
with column names in the targets file, and the value must match the names of
the input variables defined in the *.yml files (see Figure 4).
A detailed description of the dynamic between input variables and targets
files can be found here.
In addition, the CWL syntax overview can be found here.
Besides all the data form targets, wf_file, input_file and dir_path arguments,
SYSargsList constructor function options include:
step_name: a unique name for the step. This is not mandatory; however, it is highly recommended. If no name is provided, a defaultstep_x, wherexreflects the step index, will be added.dir: this option allows creating an exclusive subdirectory for the step in the workflow. All the outfiles and log files for this particular step will be generated in the respective folders.dependency: after the first step, all the additional steps appended to the workflow require the information of the dependency tree.
The appendStep<- method is used to append a new step in the workflow.
targetspath <- system.file("extdata/cwl/gunzip", "targets_gunzip.txt", package = "systemPipeR")
appendStep(sal) <- SYSargsList(step_name = "gzip",
targets = targetspath, dir = TRUE,
wf_file = "gunzip/workflow_gzip.cwl", input_file = "gunzip/gzip.yml",
dir_path = system.file("extdata/cwl", package = "systemPipeR"),
inputvars = c(FileName = "_FILE_PATH_", SampleName = "_SampleName_"),
dependency = "export_iris")Note: This will not work if the gzip is not available on your system
(installed and exported to PATH) and may only work on Windows systems using PowerShell.
For a overview of the workflow, we can check the object as follows:
sal## Instance of 'SYSargsList':
## WF Steps:
## 1. export_iris --> Status: Pending
## 2. gzip --> Status: Pending
## Total Files: 3 | Existing: 0 | Missing: 3
## 2.1. gzip
## cmdlist: 3 | Pending: 3
## Note that we have two steps, and it is expected three files from the second step. Also, the workflow status is Pending, which means the workflow object is rendered in R; however, we did not execute the workflow yet. In addition to this summary, it can be observed this step has three command lines.
For more details about the command-line rendered for each target file, it can be checked as follows:
cmdlist(sal, step = "gzip")## $gzip
## $gzip$SE
## $gzip$SE$gzip
## [1] "gzip -c results/setosa.csv > results/SE.csv.gz"
##
##
## $gzip$VE
## $gzip$VE$gzip
## [1] "gzip -c results/versicolor.csv > results/VE.csv.gz"
##
##
## $gzip$VI
## $gzip$VI$gzip
## [1] "gzip -c results/virginica.csv > results/VI.csv.gz"6.1.2.1 Using the outfiles for the next step
For building this step, all the previous procedures are being used to append the next step. However, here, we can observe power features that build the connectivity between steps in the workflow.
In this example, we would like to use the outfiles from gzip Step, as input from the next step, which is the gunzip. In this case, let’s look at the outfiles from the first step:
outfiles(sal)## $export_iris
## DataFrame with 0 rows and 0 columns
##
## $gzip
## DataFrame with 3 rows and 1 column
## gzip_file
## <character>
## SE results/SE.csv.gz
## VE results/VE.csv.gz
## VI results/VI.csv.gzThe column we want to use is “gzip_file”. For the argument targets in the
SYSargsList function, it should provide the name of the correspondent step in
the Workflow and which outfiles you would like to be incorporated in the next
step.
The argument inputvars allows the connectivity between outfiles and the
new targets file. Here, the name of the previous outfiles should be provided
it. Please note that all outfiles column names must be unique.
It is possible to keep all the original columns from the targets files or remove
some columns for a clean targets file.
The argument rm_targets_col provides this flexibility, where it is possible to
specify the names of the columns that should be removed. If no names are passing
here, the new columns will be appended.
appendStep(sal) <- SYSargsList(step_name = "gunzip",
targets = "gzip", dir = TRUE,
wf_file = "gunzip/workflow_gunzip.cwl", input_file = "gunzip/gunzip.yml",
dir_path = system.file("extdata/cwl", package = "systemPipeR"),
inputvars = c(gzip_file = "_FILE_PATH_", SampleName = "_SampleName_"),
rm_targets_col = "FileName",
dependency = "gzip")We can check the targets automatically create for this step,
based on the previous outfiles:
targetsWF(sal[3])## $gunzip
## DataFrame with 3 rows and 2 columns
## gzip_file SampleName
## <character> <character>
## SE results/SE.csv.gz SE
## VE results/VE.csv.gz VE
## VI results/VI.csv.gz VIWe can also check all the expected outfiles for this particular step, as follows:
outfiles(sal[3])## $gunzip
## DataFrame with 3 rows and 1 column
## gunzip_file
## <character>
## SE results/SE.csv
## VE results/VE.csv
## VI results/VI.csvNow, we can observe that the third step has been added and contains one substep.
sal## Instance of 'SYSargsList':
## WF Steps:
## 1. export_iris --> Status: Pending
## 2. gzip --> Status: Pending
## Total Files: 3 | Existing: 0 | Missing: 3
## 2.1. gzip
## cmdlist: 3 | Pending: 3
## 3. gunzip --> Status: Pending
## Total Files: 3 | Existing: 0 | Missing: 3
## 3.1. gunzip
## cmdlist: 3 | Pending: 3
## In addition, we can access all the command lines for each one of the substeps.
cmdlist(sal["gzip"], targets = 1)## $gzip
## $gzip$SE
## $gzip$SE$gzip
## [1] "gzip -c results/setosa.csv > results/SE.csv.gz"6.1.2.2 Getting data from a workflow instance
The final step in this simple workflow is an R code step. For that, we are using
the LineWise constructor function as demonstrated above.
One interesting feature showed here is the getColumn method that allows
extracting the information for a workflow instance. Those files can be used in
an R code, as demonstrated below.
getColumn(sal, step = "gunzip", 'outfiles')## SE VE VI
## "results/SE.csv" "results/VE.csv" "results/VI.csv"appendStep(sal) <- LineWise(code = {
df <- lapply(getColumn(sal, step = "gunzip", 'outfiles'), function(x) read.delim(x, sep = ",")[-1])
df <- do.call(rbind, df)
stats <- data.frame(cbind(mean = apply(df[,1:4], 2, mean), sd = apply(df[,1:4], 2, sd)))
stats$species <- rownames(stats)
plot <- ggplot2::ggplot(stats, ggplot2::aes(x = species, y = mean, fill = species)) +
ggplot2::geom_bar(stat = "identity", color = "black", position = ggplot2::position_dodge()) +
ggplot2::geom_errorbar(ggplot2::aes(ymin = mean-sd, ymax = mean+sd), width = .2, position = ggplot2::position_dodge(.9))
},
step_name = "iris_stats",
dependency = "gzip")6.2 Build workflow from a {R Markdown}
The precisely same workflow can be created by importing the steps from an
R Markdown file.
As demonstrated above, it is required to initialize the project with SPRproject function.
importWF function will scan and import all the R chunk from the R Markdown file
and build all the workflow instances. Then, each R chuck in the file will be
converted in a workflow step.
sal_rmd <- SPRproject(logs.dir = ".SPRproject_rmd") ## Creating directory '/tmp/RtmpUy9Tuw/Rbuild3aef6f23436e71/systemPipeR/vignettes/spr_project/.SPRproject_rmd'
## Creating file '/tmp/RtmpUy9Tuw/Rbuild3aef6f23436e71/systemPipeR/vignettes/spr_project/.SPRproject_rmd/SYSargsList.yml'sal_rmd <- importWF(sal_rmd,
file_path = system.file("extdata", "spr_simple_wf.Rmd", package = "systemPipeR"))## Reading Rmd file##
## ---- Actions ----## Checking chunk eval values## Checking chunk SPR option## Ignore non-SPR chunks: 17## Parse chunk code## Checking preprocess code for each step## No preprocessing code for SPR steps found## Now importing step 'load_library'
## Now importing step 'export_iris'
## Now importing step 'gzip'
## Now importing step 'gunzip'
## Now importing step 'stats'
## Now back up current Rmd file as template for `renderReport`
## Template for renderReport is stored at
## /tmp/RtmpUy9Tuw/Rbuild3aef6f23436e71/systemPipeR/vignettes/spr_project/.SPRproject_rmd/workflow_template.Rmd
## Edit this file manually is not recommended
## Now check if required tools are installed
## Check if they are in path:
## Checking path for gzip
## PASS
## Checking path for gunzip
## PASS
## step_name tool in_path
## 1 gzip gzip TRUE
## 2 gunzip gunzip TRUE
## All required tools in PATH, skip module check. If you want to check modules use `listCmdModules`Import doneLet’s explore the workflow to check the steps:
stepsWF(sal_rmd)## $load_library
## Instance of 'LineWise'
## Code Chunk length: 1
##
## $export_iris
## Instance of 'LineWise'
## Code Chunk length: 1
##
## $gzip
## Instance of 'SYSargs2':
## Slot names/accessors:
## targets: 3 (SE...VI), targetsheader: 1 (lines)
## modules: 0
## wf: 1, clt: 1, yamlinput: 4 (inputs)
## input: 3, output: 3
## cmdlist: 3
## Sub Steps:
## 1. gzip (rendered: TRUE)
##
##
##
## $gunzip
## Instance of 'SYSargs2':
## Slot names/accessors:
## targets: 3 (SE...VI), targetsheader: 1 (lines)
## modules: 0
## wf: 1, clt: 1, yamlinput: 4 (inputs)
## input: 3, output: 3
## cmdlist: 3
## Sub Steps:
## 1. gunzip (rendered: TRUE)
##
##
##
## $stats
## Instance of 'LineWise'
## Code Chunk length: 5dependency(sal_rmd)## $load_library
## [1] NA
##
## $export_iris
## [1] "load_library"
##
## $gzip
## [1] "export_iris"
##
## $gunzip
## [1] "gzip"
##
## $stats
## [1] "gunzip"codeLine(sal_rmd)## gzip AND gunzip step have been dropped because it is not a LineWise object.## load_library
## library(systemPipeR)
## export_iris
## mapply(function(x, y) write.csv(x, y), split(iris, factor(iris$Species)), file.path("results", paste0(names(split(iris, factor(iris$Species))), ".csv")))
## stats
## df <- lapply(getColumn(sal, step = "gunzip", "outfiles"), function(x) read.delim(x, sep = ",")[-1])
## df <- do.call(rbind, df)
## stats <- data.frame(cbind(mean = apply(df[, 1:4], 2, mean), sd = apply(df[, 1:4], 2, sd)))
## stats$species <- rownames(stats)
## plot <- ggplot2::ggplot(stats, ggplot2::aes(x = species, y = mean, fill = species)) + ggplot2::geom_bar(stat = "identity", color = "black", position = ggplot2::position_dodge()) + ggplot2::geom_errorbar(ggplot2::aes(ymin = mean - sd, ymax = mean + sd), width = 0.2, position = ggplot2::position_dodge(0.9))targetsWF(sal_rmd)## $load_library
## DataFrame with 0 rows and 0 columns
##
## $export_iris
## DataFrame with 0 rows and 0 columns
##
## $gzip
## DataFrame with 3 rows and 2 columns
## FileName SampleName
## <character> <character>
## SE results/setosa.csv SE
## VE results/versicolor.csv VE
## VI results/virginica.csv VI
##
## $gunzip
## DataFrame with 3 rows and 2 columns
## gzip_file SampleName
## <character> <character>
## SE results/SE.csv.gz SE
## VE results/VE.csv.gz VE
## VI results/VI.csv.gz VI
##
## $stats
## DataFrame with 0 rows and 0 columns6.2.1 Rules to create the R Markdown to import as workflow
To include a particular code chunk from the R Markdown file in the workflow analysis, please use the following code chunk options:
- `spr=TRUE'`: for code chunks with step workflow. For example:
```{r step_1, eval=TRUE, spr=TRUE}
```{r step_2, eval=FALSE, spr=TRUE}
importWF function can ignore eval option in code chunk, and in this case,
both of the examples steps above would be incorporated in the workflow.
For spr = TRUE, the last object assigned must to be the SYSargsList, for example:
targetspath <- system.file("extdata/cwl/example/targets_example.txt", package = "systemPipeR")
appendStep(sal) <- SYSargsList(step_name = "Example",
targets = targetspath,
wf_file = "example/example.cwl", input_file = "example/example.yml",
dir_path = system.file("extdata/cwl", package = "systemPipeR"),
inputvars = c(Message = "_STRING_", SampleName = "_SAMPLE_"))OR
appendStep(sal) <- LineWise(code = {
library(systemPipeR)
},
step_name = "load_lib")Also, note that all the required files or objects to generate one particular step
must be defined in an imported R code.
The motivation for this is that when R Markdown files are imported, the spr = TRUE
flag will be evaluated, append, and stored in the workflow control class as
the SYSargsList object.
The workflow object name used in the R Markdown (e.g. appendStep(sal)) needs to
be the same when the importWF function is used. It is important to keep consistency.
If different object names are used, when running the workflow, you can see a error,
like Error:
7 Running the workflow
For running the workflow, runWF function will execute all the command lines
store in the workflow container.
sal <- runWF(sal)## Running Step: export_iris
## Running Session: Management
##
|
| | 0%
|
|==========================================================================================| 100%
## Step Status: Success
## Running Step: gzip
## Running Session: Management
##
|
| | 0%
|
|============================== | 33%
|
|============================================================ | 67%
|
|==========================================================================================| 100%
## ---- Summary ----
## Targets Total_Files Existing_Files Missing_Files gzip
## SE SE 1 1 0 Success
## VE VE 1 1 0 Success
## VI VI 1 1 0 Success
##
## Step Status: Success
## Running Step: gunzip
## Running Session: Management
##
|
| | 0%
|
|============================== | 33%
|
|============================================================ | 67%
|
|==========================================================================================| 100%
## ---- Summary ----
## Targets Total_Files Existing_Files Missing_Files gunzip
## SE SE 1 1 0 Success
## VE VE 1 1 0 Success
## VI VI 1 1 0 Success
##
## Step Status: Success
## Running Step: iris_stats
## Running Session: Management
##
|
| | 0%
|
|==========================================================================================| 100%
## Step Status: SuccessThis essential function allows the user to choose one or multiple steps to be
executed using the steps argument. However, it is necessary to follow the
workflow dependency graph. If a selected step depends on a previous step(s) that
was not executed, the execution will fail.
sal <- runWF(sal, steps = c(1,3))Also, it allows forcing the execution of the steps, even if the status of the
step is 'Success' and all the expected outfiles exists.
Another feature of the runWF function is ignoring all the warnings
and errors and running the workflow by the arguments warning.stop and
error.stop, respectively.
sal <- runWF(sal, force = TRUE, warning.stop = FALSE, error.stop = TRUE)When the project was initialized by SPRproject function, it was created an
environment for all objects created during the workflow execution. This
environment can be accessed as follows:
viewEnvir(sal)The workflow execution allows to save this environment for future recovery:
sal <- runWF(sal, saveEnv = TRUE)7.1 Workflow status
To check the summary of the workflow, we can use:
sal## Instance of 'SYSargsList':
## WF Steps:
## 1. export_iris --> Status: Success
## 2. gzip --> Status: Success
## Total Files: 3 | Existing: 3 | Missing: 0
## 2.1. gzip
## cmdlist: 3 | Success: 3
## 3. gunzip --> Status: Success
## Total Files: 3 | Existing: 3 | Missing: 0
## 3.1. gunzip
## cmdlist: 3 | Success: 3
## 4. iris_stats --> Status: Success
## To access more details about the workflow instances, we can use the statusWF method:
statusWF(sal)## $export_iris
## DataFrame with 1 row and 2 columns
## Step Status
## <character> <character>
## 1 export_iris Success
##
## $gzip
## DataFrame with 3 rows and 5 columns
## Targets Total_Files Existing_Files Missing_Files gzip
## <character> <numeric> <numeric> <numeric> <matrix>
## SE SE 1 1 0 Success
## VE VE 1 1 0 Success
## VI VI 1 1 0 Success
##
## $gunzip
## DataFrame with 3 rows and 5 columns
## Targets Total_Files Existing_Files Missing_Files gunzip
## <character> <numeric> <numeric> <numeric> <matrix>
## SE SE 1 1 0 Success
## VE VE 1 1 0 Success
## VI VI 1 1 0 Success
##
## $iris_stats
## DataFrame with 1 row and 2 columns
## Step Status
## <character> <character>
## 1 iris_stats Success7.2 Parallelization on clusters
This section of the tutorial provides an introduction to the usage of the
systemPipeR features on a cluster.
Alternatively, the computation can be greatly accelerated by processing many files in parallel using several compute nodes of a cluster, where a scheduling/queuing system is used for load balancing.
The resources list object provides the number of independent parallel cluster
processes defined under the Njobs element in the list. The following example
will run 18 processes in parallel using each 4 CPU cores.
If the resources available on a cluster allow running all 18 processes at the
same time, then the shown sample submission will utilize in a total of 72 CPU cores.
Note, runWF can be used with most queueing systems as it is based on utilities
from the batchtools package, which supports the use of template files (*.tmpl)
for defining the run parameters of different schedulers. To run the following
code, one needs to have both a conffile (see .batchtools.conf.R samples here)
and a template file (see *.tmpl samples here)
for the queueing available on a system. The following example uses the sample
conffile and template files for the Slurm scheduler provided by this package.
The resources can be appended when the step is generated, or it is possible to
add these resources later, as the following example using the addResources
function:
resources <- list(conffile=".batchtools.conf.R",
template="batchtools.slurm.tmpl",
Njobs=18,
walltime=120, ## minutes
ntasks=1,
ncpus=4,
memory=1024, ## Mb
partition = "short"
)
sal <- addResources(sal, c("hisat2_mapping"), resources = resources)
sal <- runWF(sal)Note: The example is submitting the jog to short partition. If you desire to
use a different partition, please adjust accordingly.
8 Visualize workflow
systemPipeR workflows instances can be visualized with the plotWF function.
This function will make a plot of selected workflow instance and the following information is displayed on the plot:
- Workflow structure (dependency graphs between different steps);
- Workflow step status, *e.g.* `Success`, `Error`, `Pending`, `Warnings`;
- Sample status and statistics;
- Workflow timing: running duration time. If no argument is provided, the basic plot will automatically detect width, height, layout, plot method, branches, etc.
plotWF(sal, show_legend = TRUE, width = "80%", rstudio = TRUE)For more details about the plotWF function, please see here.
9 Technical report
systemPipeR compiles all the workflow execution logs in one central location,
making it easier to check any standard output (stdout) or standard error
(stderr) for any command-line tools used on the workflow or the R code stdout.
Also, the workflow plot is appended at the beginning of the report, making it
easier to click on the respective step.
sal <- renderLogs(sal)10 Exported the workflow
systemPipeR workflow management system allows to translate and export the
workflow build interactively to R Markdown format or an executable bash script.
This feature advances the reusability of the workflow, as well as the flexibility
for workflow execution.
10.1 R Markdown file
sal2rmd function takes an SYSargsList workflow container and translates it to
SPR workflow template R markdown format. This file can be imported with the
importWF function, as demonstrated above.
sal2rmd(sal)10.2 Bash script
sal2bash function takes an SYSargsList workflow container and translates
it to an executable bash script, so one can run the workflow without loading
SPR or using an R console.
sal2bash(sal)It will be generated on the project root an executable bash script, called by
default the spr_wf.sh. Also, a directory ./spr_wf will be created and store
all the R scripts based on the workflow steps. Please note that this function will
“collapse” adjacent R steps into one file as much as possible.
11 Project Resume and Restart
If you desire to resume or restart a project that has been initialized in the past,
SPRproject function allows this operation.
With the resume option, it is possible to load the SYSargsList object in R and
resume the analysis. Please, make sure to provide the logs.dir location, and the
corresponded YAML file name, if the default names were not used when the project was created.
sal <- SPRproject(resume = TRUE, logs.dir = ".SPRproject",
sys.file = ".SPRproject/SYSargsList.yml") If you choose to save the environment in the last analysis, you can recover all
the files created in that particular section. SPRproject function allows this
with load.envir argument. Please note that the environment was saved only with
you run the workflow in the last section (runWF()).
sal <- SPRproject(resume = TRUE, load.envir = TRUE) After loading the workflow at your current section, you can check the objects created in the old environment and decide if it is necessary to copy them to the current environment.
viewEnvir(sal)
copyEnvir(sal, list="plot", new.env = globalenv())The resume option will keep all previous logs in the folder; however, if you desire to
clean the execution (delete all the log files) history and restart the workflow,
the restart=TRUE option can be used.
sal <- SPRproject(restart = TRUE, load.envir = FALSE) The last and more drastic option from SYSproject function is to overwrite the
logs and the SYSargsList object. This option will delete the hidden folder and the
information on the SYSargsList.yml file. This will not delete any parameter
file nor any results it was created in previous runs. Please use with caution.
sal <- SPRproject(overwrite = TRUE) 12 Exploring workflow instances
systemPipeR provide several accessor methods and useful functions to explore
SYSargsList workflow object.
12.1 Accessor Methods
Several accessor methods are available that are named after the slot names of
the SYSargsList workflow object.
names(sal)## [1] "stepsWF" "statusWF" "targetsWF" "outfiles"
## [5] "SE" "dependency" "targets_connection" "projectInfo"
## [9] "runInfo"- Check the length of the workflow:
length(sal)## [1] 4- Check the steps of the workflow:
stepsWF(sal)## $export_iris
## Instance of 'LineWise'
## Code Chunk length: 1
##
## $gzip
## Instance of 'SYSargs2':
## Slot names/accessors:
## targets: 3 (SE...VI), targetsheader: 1 (lines)
## modules: 0
## wf: 1, clt: 1, yamlinput: 4 (inputs)
## input: 3, output: 3
## cmdlist: 3
## Sub Steps:
## 1. gzip (rendered: TRUE)
##
##
##
## $gunzip
## Instance of 'SYSargs2':
## Slot names/accessors:
## targets: 3 (SE...VI), targetsheader: 1 (lines)
## modules: 0
## wf: 1, clt: 1, yamlinput: 4 (inputs)
## input: 3, output: 3
## cmdlist: 3
## Sub Steps:
## 1. gunzip (rendered: TRUE)
##
##
##
## $iris_stats
## Instance of 'LineWise'
## Code Chunk length: 5- Checking the command-line for each target sample:
cmdlist() method printing the system commands for running command-line
software as specified by a given *.cwl file combined with the paths to the
input samples (e.g. FASTQ files) provided by a targets file. The example below
shows the cmdlist() output for running gzip and gunzip on the first sample.
Evaluating the output of cmdlist() can be very helpful for designing
and debugging *.cwl files of new command-line software or changing the
parameter settings of existing ones.
cmdlist(sal, step = c(2,3), targets = 1)## $gzip
## $gzip$SE
## $gzip$SE$gzip
## [1] "gzip -c results/setosa.csv > results/SE.csv.gz"
##
##
##
## $gunzip
## $gunzip$SE
## $gunzip$SE$gunzip
## [1] "gunzip -c ./results/gzip/SE.csv.gz > results/SE.csv"- Check the workflow status:
statusWF(sal)## $export_iris
## DataFrame with 1 row and 2 columns
## Step Status
## <character> <character>
## 1 export_iris Success
##
## $gzip
## DataFrame with 3 rows and 5 columns
## Targets Total_Files Existing_Files Missing_Files gzip
## <character> <numeric> <numeric> <numeric> <matrix>
## SE SE 1 1 0 Success
## VE VE 1 1 0 Success
## VI VI 1 1 0 Success
##
## $gunzip
## DataFrame with 3 rows and 5 columns
## Targets Total_Files Existing_Files Missing_Files gunzip
## <character> <numeric> <numeric> <numeric> <matrix>
## SE SE 1 1 0 Success
## VE VE 1 1 0 Success
## VI VI 1 1 0 Success
##
## $iris_stats
## DataFrame with 1 row and 2 columns
## Step Status
## <character> <character>
## 1 iris_stats Success- Check the workflow targets files:
targetsWF(sal[2])## $gzip
## DataFrame with 3 rows and 2 columns
## FileName SampleName
## <character> <character>
## SE results/setosa.csv SE
## VE results/versicolor.csv VE
## VI results/virginica.csv VI- Checking the expected outfiles files:
The outfiles components of SYSargsList define the expected outfiles files
for each step in the workflow, some of which are the input for the next workflow step.
outfiles(sal[2])## $gzip
## DataFrame with 3 rows and 1 column
## gzip_file
## <character>
## 1 ./results/gzip/SE.cs..
## 2 ./results/gzip/VE.cs..
## 3 ./results/gzip/VI.cs..- Check the workflow dependencies:
dependency(sal)## $export_iris
## [1] NA
##
## $gzip
## [1] "export_iris"
##
## $gunzip
## [1] "gzip"
##
## $iris_stats
## [1] "gzip"- Check the sample comparisons:
Sample comparisons are defined in the header lines of the targets file
starting with ‘# <CMP>’. This information can be accessed as follows:
targetsheader(sal, step = "Quality")- Get the workflow steps names:
stepName(sal)## [1] "export_iris" "gzip" "gunzip" "iris_stats"- Get the Sample Id for on particular step:
SampleName(sal, step = "gzip")## [1] "SE" "VE" "VI"SampleName(sal, step = "iris_stats")## NULL- Get the
outfilesortargetscolumn files:
getColumn(sal, "outfiles", step = "gzip", column = "gzip_file")## SE VE VI
## "./results/gzip/SE.csv.gz" "./results/gzip/VE.csv.gz" "./results/gzip/VI.csv.gz"getColumn(sal, "targetsWF", step = "gzip", column = "FileName")## SE VE VI
## "results/setosa.csv" "results/versicolor.csv" "results/virginica.csv"- Get the R code for a
LineWisestep:
codeLine(sal, step = "export_iris")## export_iris
## mapply(function(x, y) write.csv(x, y), split(iris, factor(iris$Species)), file.path("results", paste0(names(split(iris, factor(iris$Species))), ".csv")))- View all the objects in the running environment:
viewEnvir(sal)## <environment: 0x56339dbfdc10>
## [1] "df" "plot" "stats"- Copy one or multiple objects from the running environment to a new environment:
copyEnvir(sal, list = c("plot"), new.env = globalenv(), silent = FALSE)## <environment: 0x56339dbfdc10>
## Copying to 'new.env':
## plot- Accessing the
*.ymldata
yamlinput(sal, step = "gzip")## $file
## $file$class
## [1] "File"
##
## $file$path
## [1] "_FILE_PATH_"
##
##
## $SampleName
## [1] "_SampleName_"
##
## $ext
## [1] "csv.gz"
##
## $results_path
## $results_path$class
## [1] "Directory"
##
## $results_path$path
## [1] "./results"12.2 Subsetting the workflow details
- The
SYSargsListclass and its subsetting operator[:
sal[1]## Instance of 'SYSargsList':
## WF Steps:
## 1. export_iris --> Status: Success
## sal[1:3]## Instance of 'SYSargsList':
## WF Steps:
## 1. export_iris --> Status: Success
## 2. gzip --> Status: Success
## Total Files: 3 | Existing: 3 | Missing: 0
## 2.1. gzip
## cmdlist: 3 | Success: 3
## 3. gunzip --> Status: Success
## Total Files: 3 | Existing: 3 | Missing: 0
## 3.1. gunzip
## cmdlist: 3 | Success: 3
## sal[c(1,3)]## Instance of 'SYSargsList':
## WF Steps:
## 1. export_iris --> Status: Success
## 2. gunzip --> Status: Success
## Total Files: 3 | Existing: 3 | Missing: 0
## 2.1. gunzip
## cmdlist: 3 | Success: 3
## - The
SYSargsListclass and its subsetting by steps and input samples:
sal_sub <- subset(sal, subset_steps = c( 2,3), input_targets = ("SE"), keep_steps = TRUE)
stepsWF(sal_sub)## $export_iris
## Instance of 'LineWise'
## Code Chunk length: 1
##
## $gzip
## Instance of 'SYSargs2':
## Slot names/accessors:
## targets: 1 (SE...SE), targetsheader: 1 (lines)
## modules: 0
## wf: 1, clt: 1, yamlinput: 4 (inputs)
## input: 1, output: 1
## cmdlist: 1
## Sub Steps:
## 1. gzip (rendered: TRUE)
##
##
##
## $gunzip
## Instance of 'SYSargs2':
## Slot names/accessors:
## targets: 1 (SE...SE), targetsheader: 1 (lines)
## modules: 0
## wf: 1, clt: 1, yamlinput: 4 (inputs)
## input: 1, output: 1
## cmdlist: 1
## Sub Steps:
## 1. gunzip (rendered: TRUE)
##
##
##
## $iris_stats
## Instance of 'LineWise'
## Code Chunk length: 5targetsWF(sal_sub)## $export_iris
## DataFrame with 0 rows and 0 columns
##
## $gzip
## DataFrame with 1 row and 2 columns
## FileName SampleName
## <character> <character>
## SE results/setosa.csv SE
##
## $gunzip
## DataFrame with 1 row and 2 columns
## gzip_file SampleName
## <character> <character>
## SE ./results/gzip/SE.cs.. SE
##
## $iris_stats
## DataFrame with 0 rows and 0 columnsoutfiles(sal_sub)## $export_iris
## DataFrame with 0 rows and 0 columns
##
## $gzip
## DataFrame with 1 row and 1 column
## gzip_file
## <character>
## 1 ./results/gzip/SE.cs..
##
## $gunzip
## DataFrame with 1 row and 1 column
## gunzip_file
## <character>
## 1 ./results/gunzip/SE...
##
## $iris_stats
## DataFrame with 0 rows and 0 columns- The
SYSargsListclass and its operator+
sal[1] + sal[2] + sal[3]12.3 Replacement Methods
- Update a
inputparameter in the workflow
sal_c <- sal
## check values
yamlinput(sal_c, step = "gzip")## $file
## $file$class
## [1] "File"
##
## $file$path
## [1] "_FILE_PATH_"
##
##
## $SampleName
## [1] "_SampleName_"
##
## $ext
## [1] "csv.gz"
##
## $results_path
## $results_path$class
## [1] "Directory"
##
## $results_path$path
## [1] "./results"## check on command-line
cmdlist(sal_c, step = "gzip", targets = 1)## $gzip
## $gzip$SE
## $gzip$SE$gzip
## [1] "gzip -c results/setosa.csv > results/SE.csv.gz"## Replace
yamlinput(sal_c, step = "gzip", paramName = "ext") <- "txt.gz"
## check NEW values
yamlinput(sal_c, step = "gzip")## $file
## $file$class
## [1] "File"
##
## $file$path
## [1] "_FILE_PATH_"
##
##
## $SampleName
## [1] "_SampleName_"
##
## $ext
## [1] "txt.gz"
##
## $results_path
## $results_path$class
## [1] "Directory"
##
## $results_path$path
## [1] "./results"## Check on command-line
cmdlist(sal_c, step = "gzip", targets = 1)## $gzip
## $gzip$SE
## $gzip$SE$gzip
## [1] "gzip -c results/setosa.csv > results/SE.txt.gz"- Append and Replacement methods for R Code Steps
appendCodeLine(sal_c, step = "export_iris", after = 1) <- "log_cal_100 <- log(100)"
codeLine(sal_c, step = "export_iris")## export_iris
## mapply(function(x, y) write.csv(x, y), split(iris, factor(iris$Species)), file.path("results", paste0(names(split(iris, factor(iris$Species))), ".csv")))
## log_cal_100 <- log(100)replaceCodeLine(sal_c, step="export_iris", line = 2) <- LineWise(code={
log_cal_100 <- log(50)
})
codeLine(sal_c, step = 1)## export_iris
## mapply(function(x, y) write.csv(x, y), split(iris, factor(iris$Species)), file.path("results", paste0(names(split(iris, factor(iris$Species))), ".csv")))
## log_cal_100 <- log(50)For more details about the LineWise class, please see below.
- Rename a Step
renameStep(sal_c, step = 1) <- "newStep"
renameStep(sal_c, c(1, 2)) <- c("newStep2", "newIndex")
sal_c## Instance of 'SYSargsList':
## WF Steps:
## 1. newStep2 --> Status: Success
## 2. newIndex --> Status: Success
## Total Files: 3 | Existing: 3 | Missing: 0
## 2.1. gzip
## cmdlist: 3 | Success: 3
## 3. gunzip --> Status: Success
## Total Files: 3 | Existing: 3 | Missing: 0
## 3.1. gunzip
## cmdlist: 3 | Success: 3
## 4. iris_stats --> Status: Success
## names(outfiles(sal_c))## [1] "newStep2" "newIndex" "gunzip" "iris_stats"names(targetsWF(sal_c))## [1] "newStep2" "newIndex" "gunzip" "iris_stats"dependency(sal_c)## $newStep2
## [1] NA
##
## $newIndex
## [1] "newStep2"
##
## $gunzip
## [1] "newIndex"
##
## $iris_stats
## [1] "newIndex"- Replace a Step
sal_test <- sal[c(1,2)]
replaceStep(sal_test, step = 1, step_name = "gunzip" ) <- sal[3]
sal_testNote: Please use this method with attention, because it can disrupt all the dependency graphs.
- Removing a Step
sal_test <- sal[-2]
sal_test## Instance of 'SYSargsList':
## WF Steps:
## 1. export_iris --> Status: Success
## 2. gunzip --> Status: Success
## Total Files: 3 | Existing: 3 | Missing: 0
## 2.1. gunzip
## cmdlist: 3 | Success: 3
## 3. iris_stats --> Status: Success
## 13 CWL syntax
This section will introduce how CWL describes command-line tools and the specification and terminology of each file. For complete documentation, please check the CommandLineTools documentation here and here for Workflows and the user guide here.
CWL command-line specifications are written in YAML format.
In CWL, files with the extension .cwl define the parameters of a chosen
command-line step or workflow, while files with the extension .yml define
the input variables of command-line steps.
13.1 CWL CommandLineTool
CommandLineTool by CWL definition is a standalone process, with no interaction
if other programs, execute a program, and produce output.
Let’s explore the *.cwl file:
dir_path <- system.file("extdata/cwl", package = "systemPipeR")
cwl <- yaml::read_yaml(file.path(dir_path, "example/example.cwl"))- The
cwlVersioncomponent shows the CWL specification version used by the document. - The
classcomponent shows this document describes aCommandLineTool.Note that CWL has anotherclass, calledWorkflowwhich represents a union of one or more command-line tools together.
cwl[1:2]## $cwlVersion
## [1] "v1.0"
##
## $class
## [1] "CommandLineTool"baseCommandcomponent provides the name of the software that we desire to execute.
cwl[3]## $baseCommand
## [1] "echo"- The
inputssection provides the input information to run the tool. Important components of this section are:id: each input has an id describing the input name;type: describe the type of input value (string, int, long, float, double, File, Directory or Any);inputBinding: It is optional. This component indicates if the input parameter should appear on the command-line. If this component is missing when describing an input parameter, it will not appear in the command-line but can be used to build the command-line.
cwl[4]## $inputs
## $inputs$message
## $inputs$message$type
## [1] "string"
##
## $inputs$message$inputBinding
## $inputs$message$inputBinding$position
## [1] 1
##
##
##
## $inputs$SampleName
## $inputs$SampleName$type
## [1] "string"
##
##
## $inputs$results_path
## $inputs$results_path$type
## [1] "Directory"- The
outputssection should provide a list of the expected outputs after running the command-line tools. Important components of this section are:id: each input has an id describing the output name;type: describe the type of output value (string, int, long, float, double, File, Directory, Any orstdout);outputBinding: This component defines how to set the outputs values. Theglobcomponent will define the name of the output value.
cwl[5]## $outputs
## $outputs$string
## $outputs$string$type
## [1] "stdout"stdout: component to specify afilenameto capture standard output. Note here we are using a syntax that takes advantage of the inputs section, using results_path parameter and also theSampleNameto construct the outputfilename.
cwl[6]## $stdout
## [1] "$(inputs.results_path.basename)/$(inputs.SampleName).txt"13.2 CWL Workflow
Workflow class in CWL is defined by multiple process steps, where can have
interdependencies between the steps, and the output for one step can be used as
input in the further steps.
cwl.wf <- yaml::read_yaml(file.path(dir_path, "example/workflow_example.cwl"))- The
cwlVersioncomponent shows the CWL specification version used by the document. - The
classcomponent shows this document describes aWorkflow.
cwl.wf[1:2]## $class
## [1] "Workflow"
##
## $cwlVersion
## [1] "v1.0"- The
inputssection describes the inputs of the workflow.
cwl.wf[3]## $inputs
## $inputs$message
## [1] "string"
##
## $inputs$SampleName
## [1] "string"
##
## $inputs$results_path
## [1] "Directory"- The
outputssection describes the outputs of the workflow.
cwl.wf[4]## $outputs
## $outputs$string
## $outputs$string$outputSource
## [1] "echo/string"
##
## $outputs$string$type
## [1] "stdout"- The
stepssection describes the steps of the workflow. In this simple example, we demonstrate one step.
cwl.wf[5]## $steps
## $steps$echo
## $steps$echo$`in`
## $steps$echo$`in`$message
## [1] "message"
##
## $steps$echo$`in`$SampleName
## [1] "SampleName"
##
## $steps$echo$`in`$results_path
## [1] "results_path"
##
##
## $steps$echo$out
## [1] "[string]"
##
## $steps$echo$run
## [1] "example/example.cwl"13.3 CWL Input Parameter
Next, let’s explore the .yml file, which provide the input parameter values for all the components we describe above.
For this simple example, we have three parameters defined:
yaml::read_yaml(file.path(dir_path, "example/example_single.yml"))## $message
## [1] "Hello World!"
##
## $SampleName
## [1] "M1"
##
## $results_path
## $results_path$class
## [1] "Directory"
##
## $results_path$path
## [1] "./results"Note that if we define an input component in the .cwl file, this value needs to be also defined here in the .yml file.
14 How to connect CWL description files within systemPipeR
This section will demonstrate how to connect CWL parameters files to create
workflows. In addition, we will show how the workflow can be easily scalable
with systemPipeR.
SYSargsList container stores all the information and instructions needed for processing
a set of input files with a single or many command-line steps within a workflow
(i.e. several components of the software or several independent software tools).
The SYSargsList object is created and fully populated with the SYSargsList construct
function.
Full documentation of SYSargsList management instances can be found here
and here.
The following imports a .cwl file (here example.cwl) for running the echo Hello World!
example.
HW <- SYSargsList(wf_file = "example/workflow_example.cwl",
input_file = "example/example_single.yml",
dir_path = system.file("extdata/cwl", package = "systemPipeR"))
HW## Instance of 'SYSargsList':
## WF Steps:
## 1. Step_x --> Status: Pending
## Total Files: 1 | Existing: 0 | Missing: 1
## 1.1. echo
## cmdlist: 1 | Pending: 1
## cmdlist(HW)## $Step_x
## $Step_x$defaultid
## $Step_x$defaultid$echo
## [1] "echo Hello World! > results/M1.txt"However, we are limited to run just one command-line or one sample in this example.
To scale the command-line over many samples, a simple solution offered by systemPipeR
is to provide a variable for each of the parameters that we want to run with multiple samples.
Let’s explore the example:
yml <- yaml::read_yaml(file.path(dir_path, "example/example.yml"))
yml## $message
## [1] "_STRING_"
##
## $SampleName
## [1] "_SAMPLE_"
##
## $results_path
## $results_path$class
## [1] "Directory"
##
## $results_path$path
## [1] "./results"For the message and SampleName parameter, we are passing a variable connecting
with a third file called targets.
Now, let’s explore the targets file structure:
targetspath <- system.file("extdata/cwl/example/targets_example.txt", package = "systemPipeR")
read.delim(targetspath, comment.char = "#")## Message SampleName
## 1 Hello World! M1
## 2 Hello USA! M2
## 3 Hello Bioconductor! M3The targets file defines all input files or values and sample ids of an analysis workflow.
For this example, we have defined a string message for the echo command-line tool,
in the first column that will be evaluated, and the second column is the
SampleName id for each one of the messages.
Any number of additional columns can be added as needed.
Users should note here, the usage of targets files is optional when using
systemPipeR's new CWL interface. Since for organizing experimental variables targets
files are extremely useful and user-friendly. Thus, we encourage users to keep using them.
14.0.1 How to connect the parameter files and targets file information?
The constructor function creates an SYSargsList S4 class object connecting three input files:
- CWL command-line specification file (
wf_fileargument); - Input variables (
input_fileargument); - Targets file (
targetsargument).
As demonstrated above, the latter is optional for workflow steps lacking input files.
The connection between input variables (here defined by input_file argument)
and the targets file are defined under the inputvars argument.
A named vector is required, where each element name needs to match with column
names in the targets file, and the value must match the names of the .yml
variables. This is used to replace the CWL variable and construct all the command-line
for that particular step.
The variable pattern _XXXX_ is used to distinguish CWL variables that target
columns will replace. This pattern is recommended for consistency and easy identification
but not enforced.
The following imports a .cwl file (same example demonstrated above) for running
the echo Hello World example. However, now we are connecting the variable defined
on the .yml file with the targets file inputs.
HW_mul <- SYSargsList(step_name = "echo",
targets=targetspath,
wf_file="example/workflow_example.cwl", input_file="example/example.yml",
dir_path = dir_path,
inputvars = c(Message = "_STRING_", SampleName = "_SAMPLE_"))
HW_mul## Instance of 'SYSargsList':
## WF Steps:
## 1. echo --> Status: Pending
## Total Files: 3 | Existing: 0 | Missing: 3
## 1.1. echo
## cmdlist: 3 | Pending: 3
## cmdlist(HW_mul)## $echo
## $echo$M1
## $echo$M1$echo
## [1] "echo Hello World! > results/M1.txt"
##
##
## $echo$M2
## $echo$M2$echo
## [1] "echo Hello USA! > results/M2.txt"
##
##
## $echo$M3
## $echo$M3$echo
## [1] "echo Hello Bioconductor! > results/M3.txt"15 Creating the CWL param files from the command-line
Users need to define the command-line in a pseudo-bash script format:
command <- "
hisat2 \
-S <F, out: ./results/M1A.sam> \
-x <F: ./data/tair10.fasta> \
-k <int: 1> \
-min-intronlen <int: 30> \
-max-intronlen <int: 3000> \
-threads <int: 4> \
-U <F: ./data/SRR446027_1.fastq.gz>
"15.1 Define prefix and defaults
First line is the base command. Each line is an argument with its default value.
For argument lines (starting from the second line), any word before the first space with leading
-or--in each will be treated as a prefix, like-Sor--min. Any line without this first word will be treated as no prefix.All defaults are placed inside
<...>.First argument is the input argument type.
Ffor “File”, “int”, “string” are unchanged.Optional: use the keyword
outfollowed the type with a,comma separation to indicate if this argument is also an CWL output.Then, use
:to separate keywords and default values, any non-space value after the:will be treated as the default value.If any argument has no default value, just a flag, like
--verbose, there is no need to add any<...>
15.2 createParam Function
createParam function requires the string as defined above as an input.
First of all, the function will print the three components of the cwl file:
- BaseCommand: Specifies the program to execute.
- Inputs: Defines the input parameters of the process.
- Outputs: Defines the parameters representing the output of the process.
The four component is the original command-line.
If in interactive mode, the function will verify that everything is correct and will ask you to proceed. Here, the user can answer “no” and provide more information at the string level. Another question is to save the param created here.
If running the workflow in non-interactive mode, the createParam function will
consider “yes” and returning the container.
cmd <- createParam(command, writeParamFiles = FALSE)## *****BaseCommand*****
## hisat2
## *****Inputs*****
## S:
## type: File
## preF: -S
## yml: ./results/M1A.sam
## x:
## type: File
## preF: -x
## yml: ./data/tair10.fasta
## k:
## type: int
## preF: -k
## yml: 1
## min-intronlen:
## type: int
## preF: -min-intronlen
## yml: 30
## max-intronlen:
## type: int
## preF: -max-intronlen
## yml: 3000
## threads:
## type: int
## preF: -threads
## yml: 4
## U:
## type: File
## preF: -U
## yml: ./data/SRR446027_1.fastq.gz
## *****Outputs*****
## output1:
## type: File
## value: ./results/M1A.sam
## *****Parsed raw command line*****
## hisat2 -S ./results/M1A.sam -x ./data/tair10.fasta -k 1 -min-intronlen 30 -max-intronlen 3000 -threads 4 -U ./data/SRR446027_1.fastq.gzIf the user chooses not to save the param files on the above operation,
it can use the writeParamFiles function.
writeParamFiles(cmd, overwrite = TRUE)15.3 How to access and edit param files
15.3.1 Print a component
printParam(cmd, position = "baseCommand") ## Print a baseCommand section## *****BaseCommand*****
## hisat2printParam(cmd, position = "outputs")## *****Outputs*****
## output1:
## type: File
## value: ./results/M1A.samprintParam(cmd, position = "inputs", index = 1:2) ## Print by index## *****Inputs*****
## S:
## type: File
## preF: -S
## yml: ./results/M1A.sam
## x:
## type: File
## preF: -x
## yml: ./data/tair10.fastaprintParam(cmd, position = "inputs", index = -1:-2) ## Negative indexing printing to exclude certain indices in a position## *****Inputs*****
## k:
## type: int
## preF: -k
## yml: 1
## min-intronlen:
## type: int
## preF: -min-intronlen
## yml: 30
## max-intronlen:
## type: int
## preF: -max-intronlen
## yml: 3000
## threads:
## type: int
## preF: -threads
## yml: 4
## U:
## type: File
## preF: -U
## yml: ./data/SRR446027_1.fastq.gz15.3.2 Subsetting the command-line
cmd2 <- subsetParam(cmd, position = "inputs", index = 1:2, trim = TRUE)## *****Inputs*****
## S:
## type: File
## preF: -S
## yml: ./results/M1A.sam
## x:
## type: File
## preF: -x
## yml: ./data/tair10.fasta
## *****Parsed raw command line*****
## hisat2 -S ./results/M1A.sam -x ./data/tair10.fastacmdlist(cmd2)## $defaultid
## $defaultid$hisat2
## [1] "hisat2 -S ./results/M1A.sam -x ./data/tair10.fasta"cmd2 <- subsetParam(cmd, position = "inputs", index = c("S", "x"), trim = TRUE)## *****Inputs*****
## S:
## type: File
## preF: -S
## yml: ./results/M1A.sam
## x:
## type: File
## preF: -x
## yml: ./data/tair10.fasta
## *****Parsed raw command line*****
## hisat2 -S ./results/M1A.sam -x ./data/tair10.fastacmdlist(cmd2)## $defaultid
## $defaultid$hisat2
## [1] "hisat2 -S ./results/M1A.sam -x ./data/tair10.fasta"15.3.3 Replacing a existing argument in the command-line
cmd3 <- replaceParam(cmd, "base", index = 1, replace = list(baseCommand = "bwa"))## Replacing baseCommand
## *****BaseCommand*****
## bwa
## *****Parsed raw command line*****
## bwa -S ./results/M1A.sam -x ./data/tair10.fasta -k 1 -min-intronlen 30 -max-intronlen 3000 -threads 4 -U ./data/SRR446027_1.fastq.gzcmdlist(cmd3)## $defaultid
## $defaultid$hisat2
## [1] "bwa -S ./results/M1A.sam -x ./data/tair10.fasta -k 1 -min-intronlen 30 -max-intronlen 3000 -threads 4 -U ./data/SRR446027_1.fastq.gz"new_inputs <- new_inputs <- list(
"new_input1" = list(type = "File", preF="-b", yml ="myfile"),
"new_input2" = "-L <int: 4>"
)
cmd4 <- replaceParam(cmd, "inputs", index = 1:2, replace = new_inputs)## Replacing inputs
## *****Inputs*****
## new_input1:
## type: File
## preF: -b
## yml: myfile
## new_input2:
## type: int
## preF: -L
## yml: 4
## k:
## type: int
## preF: -k
## yml: 1
## min-intronlen:
## type: int
## preF: -min-intronlen
## yml: 30
## max-intronlen:
## type: int
## preF: -max-intronlen
## yml: 3000
## threads:
## type: int
## preF: -threads
## yml: 4
## U:
## type: File
## preF: -U
## yml: ./data/SRR446027_1.fastq.gz
## *****Parsed raw command line*****
## hisat2 -b myfile -L 4 -k 1 -min-intronlen 30 -max-intronlen 3000 -threads 4 -U ./data/SRR446027_1.fastq.gzcmdlist(cmd4)## $defaultid
## $defaultid$hisat2
## [1] "hisat2 -b myfile -L 4 -k 1 -min-intronlen 30 -max-intronlen 3000 -threads 4 -U ./data/SRR446027_1.fastq.gz"15.3.4 Adding new arguments
newIn <- new_inputs <- list(
"new_input1" = list(type = "File", preF="-b1", yml ="myfile1"),
"new_input2" = list(type = "File", preF="-b2", yml ="myfile2"),
"new_input3" = "-b3 <F: myfile3>"
)
cmd5 <- appendParam(cmd, "inputs", index = 1:2, append = new_inputs)## Replacing inputs
## *****Inputs*****
## S:
## type: File
## preF: -S
## yml: ./results/M1A.sam
## x:
## type: File
## preF: -x
## yml: ./data/tair10.fasta
## k:
## type: int
## preF: -k
## yml: 1
## min-intronlen:
## type: int
## preF: -min-intronlen
## yml: 30
## max-intronlen:
## type: int
## preF: -max-intronlen
## yml: 3000
## threads:
## type: int
## preF: -threads
## yml: 4
## U:
## type: File
## preF: -U
## yml: ./data/SRR446027_1.fastq.gz
## new_input1:
## type: File
## preF: -b1
## yml: myfile1
## new_input2:
## type: File
## preF: -b2
## yml: myfile2
## new_input3:
## type: File
## preF: -b3
## yml: myfile3
## *****Parsed raw command line*****
## hisat2 -S ./results/M1A.sam -x ./data/tair10.fasta -k 1 -min-intronlen 30 -max-intronlen 3000 -threads 4 -U ./data/SRR446027_1.fastq.gz -b1 myfile1 -b2 myfile2 -b3 myfile3cmdlist(cmd5)## $defaultid
## $defaultid$hisat2
## [1] "hisat2 -S ./results/M1A.sam -x ./data/tair10.fasta -k 1 -min-intronlen 30 -max-intronlen 3000 -threads 4 -U ./data/SRR446027_1.fastq.gz -b1 myfile1 -b2 myfile2 -b3 myfile3"cmd6 <- appendParam(cmd, "inputs", index = 1:2, after=0, append = new_inputs)## Replacing inputs
## *****Inputs*****
## new_input1:
## type: File
## preF: -b1
## yml: myfile1
## new_input2:
## type: File
## preF: -b2
## yml: myfile2
## new_input3:
## type: File
## preF: -b3
## yml: myfile3
## S:
## type: File
## preF: -S
## yml: ./results/M1A.sam
## x:
## type: File
## preF: -x
## yml: ./data/tair10.fasta
## k:
## type: int
## preF: -k
## yml: 1
## min-intronlen:
## type: int
## preF: -min-intronlen
## yml: 30
## max-intronlen:
## type: int
## preF: -max-intronlen
## yml: 3000
## threads:
## type: int
## preF: -threads
## yml: 4
## U:
## type: File
## preF: -U
## yml: ./data/SRR446027_1.fastq.gz
## *****Parsed raw command line*****
## hisat2 -b1 myfile1 -b2 myfile2 -b3 myfile3 -S ./results/M1A.sam -x ./data/tair10.fasta -k 1 -min-intronlen 30 -max-intronlen 3000 -threads 4 -U ./data/SRR446027_1.fastq.gzcmdlist(cmd6)## $defaultid
## $defaultid$hisat2
## [1] "hisat2 -b1 myfile1 -b2 myfile2 -b3 myfile3 -S ./results/M1A.sam -x ./data/tair10.fasta -k 1 -min-intronlen 30 -max-intronlen 3000 -threads 4 -U ./data/SRR446027_1.fastq.gz"15.3.5 Editing output param
new_outs <- list(
"sam_out" = "<F: $(inputs.results_path)/test.sam>"
)
cmd7 <- replaceParam(cmd, "outputs", index = 1, replace = new_outs)## Replacing outputs
## *****Outputs*****
## sam_out:
## type: File
## value: $(inputs.results_path)/test.sam
## *****Parsed raw command line*****
## hisat2 -S ./results/M1A.sam -x ./data/tair10.fasta -k 1 -min-intronlen 30 -max-intronlen 3000 -threads 4 -U ./data/SRR446027_1.fastq.gzoutput(cmd7) ## $defaultid
## $defaultid$hisat2
## [1] "./results/test.sam"15.3.6 Internal Check
cmd <- "
hisat2 \
-S <F, out: _SampleName_.sam> \
-x <F: ./data/tair10.fasta> \
-k <int: 1> \
-min-intronlen <int: 30> \
-max-intronlen <int: 3000> \
-threads <int: 4> \
-U <F: _FASTQ_PATH1_>
"
WF <- createParam(cmd, overwrite = TRUE, writeParamFiles = TRUE, confirm = TRUE) ## *****BaseCommand*****
## hisat2
## *****Inputs*****
## S:
## type: File
## preF: -S
## yml: _SampleName_.sam
## x:
## type: File
## preF: -x
## yml: ./data/tair10.fasta
## k:
## type: int
## preF: -k
## yml: 1
## min-intronlen:
## type: int
## preF: -min-intronlen
## yml: 30
## max-intronlen:
## type: int
## preF: -max-intronlen
## yml: 3000
## threads:
## type: int
## preF: -threads
## yml: 4
## U:
## type: File
## preF: -U
## yml: _FASTQ_PATH1_
## *****Outputs*****
## output1:
## type: File
## value: _SampleName_.sam
## *****Parsed raw command line*****
## hisat2 -S _SampleName_.sam -x ./data/tair10.fasta -k 1 -min-intronlen 30 -max-intronlen 3000 -threads 4 -U _FASTQ_PATH1_
## Written content of 'commandLine' to file:
## param/cwl/hisat2/hisat2.cwl
## Written content of 'commandLine' to file:
## param/cwl/hisat2/hisat2.ymltargetspath <- system.file("extdata", "targets.txt", package = "systemPipeR")
WF_test <- loadWorkflow(targets = targetspath, wf_file="hisat2.cwl",
input_file="hisat2.yml", dir_path = "param/cwl/hisat2/")
WF_test <- renderWF(WF_test, inputvars = c(FileName = "_FASTQ_PATH1_"))
WF_test## Instance of 'SYSargs2':
## Slot names/accessors:
## targets: 18 (M1A...V12B), targetsheader: 4 (lines)
## modules: 1
## wf: 0, clt: 1, yamlinput: 9 (inputs)
## input: 18, output: 18
## cmdlist: 18
## Sub Steps:
## 1. hisat2 (rendered: TRUE)cmdlist(WF_test)[1:2]## $M1A
## $M1A$hisat2
## [1] "hisat2 -S _SampleName_.sam -x ./data/tair10.fasta -k 1 -min-intronlen 30 -max-intronlen 3000 -threads 4 -U ./data/SRR446027_1.fastq.gz"
##
##
## $M1B
## $M1B$hisat2
## [1] "hisat2 -S _SampleName_.sam -x ./data/tair10.fasta -k 1 -min-intronlen 30 -max-intronlen 3000 -threads 4 -U ./data/SRR446028_1.fastq.gz"16 Inner Classes
SYSargsList steps are can be defined with two inner classes, SYSargs2 and
LineWise. Next, more details on both classes.
16.1 SYSargs2 Class
SYSargs2 workflow control class, an S4 class, is a list-like container where
each instance stores all the input/output paths and parameter components
required for a particular data analysis step. SYSargs2 instances are
generated by two constructor functions, loadWF and renderWF, using as data
input targets or yaml files as well as two cwl parameter files (for
details see below).
In CWL, files with the extension .cwl define the parameters of a chosen
command-line step or workflow, while files with the extension .yml define
the input variables of command-line steps. Note, input variables provided by a
targets file can be passed on to a SYSargs2 instance via the inputvars
argument of the renderWF function.
The following imports a .cwl file (here hisat2-mapping-se.cwl) for
running the short read aligner HISAT2 (Kim, Langmead, and Salzberg 2015). For more details about the
file structure and how to design or customize our own software tools, please
check systemPipeR and CWL pipeline.
The loadWF and renderWF functions render the proper command-line strings for each sample and software tool.
library(systemPipeR)
targetspath <- system.file("extdata", "targets.txt", package = "systemPipeR")
dir_path <- system.file("extdata/cwl", package = "systemPipeR")
WF <- loadWF(targets = targetspath, wf_file = "hisat2/hisat2-mapping-se.cwl",
input_file = "hisat2/hisat2-mapping-se.yml",
dir_path = dir_path)
WF <- renderWF(WF, inputvars = c(FileName = "_FASTQ_PATH1_",
SampleName = "_SampleName_"))Several accessor methods are available that are named after the slot names of
the SYSargs2 object.
names(WF)## [1] "targets" "targetsheader" "modules" "wf"
## [5] "clt" "yamlinput" "cmdlist" "input"
## [9] "output" "files" "inputvars" "cmdToCwl"
## [13] "status" "internal_outfiles"Of particular interest is the cmdlist() method. It constructs the system
commands for running command-line software as specified by a given .cwl file
combined with the paths to the input samples (e.g. FASTQ files) provided by a
targets file. The example below shows the cmdlist() output for running
HISAT2 on the first SE read sample. Evaluating the output of cmdlist() can
be very helpful for designing and debugging .cwl files of new command-line
software or changing the parameter settings of existing ones.
cmdlist(WF)[1]## $M1A
## $M1A$`hisat2-mapping-se`
## [1] "hisat2 -S ./results/M1A.sam -x ./data/tair10.fasta -k 1 --min-intronlen 30 --max-intronlen 3000 -U ./data/SRR446027_1.fastq.gz --threads 4"The output components of SYSargs2 define the expected output files for each
step in the workflow; some of which are the input for the next workflow step,
here next SYSargs2 instance.
output(WF)[1]## $M1A
## $M1A$`hisat2-mapping-se`
## [1] "./results/M1A.sam"The targets components of SYSargs2 object can be accessed by the targets
method. Here, for single-end (SE) samples, the structure of the targets file is
defined by:
FileName: specify the FASTQ files path;SampleName: Unique IDs for each sample;Factor: ID for each treatment or condition.
targets(WF)[1]## $M1A
## $M1A$FileName
## [1] "./data/SRR446027_1.fastq.gz"
##
## $M1A$SampleName
## [1] "M1A"
##
## $M1A$Factor
## [1] "M1"
##
## $M1A$SampleLong
## [1] "Mock.1h.A"
##
## $M1A$Experiment
## [1] 1
##
## $M1A$Date
## [1] "23-Mar-2012"as(WF, "DataFrame")## DataFrame with 18 rows and 6 columns
## FileName SampleName Factor SampleLong Experiment Date
## <character> <character> <character> <character> <character> <character>
## 1 ./data/SRR446027_1.f.. M1A M1 Mock.1h.A 1 23-Mar-2012
## 2 ./data/SRR446028_1.f.. M1B M1 Mock.1h.B 1 23-Mar-2012
## 3 ./data/SRR446029_1.f.. A1A A1 Avr.1h.A 1 23-Mar-2012
## 4 ./data/SRR446030_1.f.. A1B A1 Avr.1h.B 1 23-Mar-2012
## 5 ./data/SRR446031_1.f.. V1A V1 Vir.1h.A 1 23-Mar-2012
## ... ... ... ... ... ... ...
## 14 ./data/SRR446040_1.f.. M12B M12 Mock.12h.B 1 23-Mar-2012
## 15 ./data/SRR446041_1.f.. A12A A12 Avr.12h.A 1 23-Mar-2012
## 16 ./data/SRR446042_1.f.. A12B A12 Avr.12h.B 1 23-Mar-2012
## 17 ./data/SRR446043_1.f.. V12A V12 Vir.12h.A 1 23-Mar-2012
## 18 ./data/SRR446044_1.f.. V12B V12 Vir.12h.B 1 23-Mar-2012Please note, to work with custom data, users need to generate a targets file
containing the paths to their own FASTQ files and then provide under
targetspath the path to the corresponding targets file.
In addition, if the Environment Modules is available, it is possible to define which module should be loaded, as shown here:
modules(WF)## module1
## "hisat2/2.1.0"Additional information can be accessed, as the parameters files location and the
inputvars provided to generate the object.
files(WF)
inputvars(WF)16.2 LineWise Class
LineWise was designed to store all the R code chunk when an RMarkdown file is
imported as a workflow.
rmd <- system.file("extdata", "spr_simple_lw.Rmd", package = "systemPipeR")
sal_lw <- SPRproject(overwrite = TRUE)## Recreating directory '/tmp/RtmpUy9Tuw/Rbuild3aef6f23436e71/systemPipeR/vignettes/spr_project/.SPRproject'
## Creating file '/tmp/RtmpUy9Tuw/Rbuild3aef6f23436e71/systemPipeR/vignettes/spr_project/.SPRproject/SYSargsList.yml'sal_lw <- importWF(sal_lw, rmd, verbose = FALSE)## Now check if required tools are installed
## There is no commandline (SYSargs) step in this workflow, skip.codeLine(sal_lw)## firstStep
## mapply(function(x, y) write.csv(x, y), split(iris, factor(iris$Species)), file.path("results", paste0(names(split(iris, factor(iris$Species))), ".csv")))
## secondStep
## setosa <- read.delim("results/setosa.csv", sep = ",")
## versicolor <- read.delim("results/versicolor.csv", sep = ",")
## virginica <- read.delim("results/virginica.csv", sep = ",")- Coerce methods available:
lw <- stepsWF(sal_lw)[[2]]
## Coerce
ll <- as(lw, "list")
class(ll)## [1] "list"lw <- as(ll, "LineWise")
lw## Instance of 'LineWise'
## Code Chunk length: 3- Access details
length(lw)## [1] 3names(lw)## [1] "codeLine" "codeChunkStart" "stepName" "dependency" "status"
## [6] "files" "runInfo"codeLine(lw)## setosa <- read.delim("results/setosa.csv", sep = ",")
## versicolor <- read.delim("results/versicolor.csv", sep = ",")
## virginica <- read.delim("results/virginica.csv", sep = ",")codeChunkStart(lw)## integer(0)rmdPath(lw)## character(0)- Subsetting
l <- lw[2]
codeLine(l)## versicolor <- read.delim("results/versicolor.csv", sep = ",")l_sub <- lw[-2]
codeLine(l_sub)## setosa <- read.delim("results/setosa.csv", sep = ",")
## virginica <- read.delim("results/virginica.csv", sep = ",")- Replacement methods
replaceCodeLine(lw, line = 2) <- "5+5"
codeLine(lw)## setosa <- read.delim("results/setosa.csv", sep = ",")
## 5 + 5
## virginica <- read.delim("results/virginica.csv", sep = ",")appendCodeLine(lw, after = 0) <- "6+7"
codeLine(lw)## 6 + 7
## setosa <- read.delim("results/setosa.csv", sep = ",")
## 5 + 5
## virginica <- read.delim("results/virginica.csv", sep = ",")- Replacement methods for
SYSargsList
replaceCodeLine(sal_lw, step = 2, line = 2) <- LineWise(code={
"5+5"
})
codeLine(sal_lw, step = 2)
appendCodeLine(sal_lw, step = 2) <- "66+55"
codeLine(sal_lw, step = 2)
appendCodeLine(sal_lw, step = 1, after = 1) <- "66+55"
codeLine(sal_lw, step = 1)16.3 Workflow design structure using SYSargs: Previous version
Instances of this S4 object class are constructed by the systemArgs function
from two simple tabular files: a targets file and a param file. The
latter is optional for workflow steps lacking command-line software. Typically,
a SYSargs instance stores all sample-level inputs as well as the paths to
the corresponding outputs generated by command-line- or R-based software
generating sample-level output files, such as read preprocessors
(trimmed/filtered FASTQ files), aligners (SAM/BAM files), variant callers
(VCF/BCF files) or peak callers (BED/WIG files). Each sample level input/output
operation uses its own SYSargs instance. The outpaths of SYSargs usually
define the sample inputs for the next SYSargs instance. This connectivity is
established by writing the outpaths with the writeTargetsout function to a
new targets file that serves as input to the next systemArgs call.
Typically, the user has to provide only the initial targets file. All
downstream targets files are generated automatically. By chaining several
SYSargs steps together one can construct complex workflows involving many
sample-level input/output file operations with any combination of command-line
or R-based software.
17 Third-party software tools
Current, systemPipeR provides the param file templates for third-party
software tools. Please check the listed software tools.
| Tool Name | Description | Step |
|---|---|---|
| bwa | BWA is a software package for mapping low-divergent sequences against a large reference genome, such as the human genome. | Alignment |
| Bowtie2 | Bowtie 2 is an ultrafast and memory-efficient tool for aligning sequencing reads to long reference sequences. | Alignment |
| FASTX-Toolkit | FASTX-Toolkit is a collection of command line tools for Short-Reads FASTA/FASTQ files preprocessing. | Read Preprocessing |
| TransRate | Transrate is software for de-novo transcriptome assembly quality analysis. | Quality |
| Gsnap | GSNAP is a genomic short-read nucleotide alignment program. | Alignment |
| Samtools | Samtools is a suite of programs for interacting with high-throughput sequencing data. | Post-processing |
| Trimmomatic | Trimmomatic is a flexible read trimming tool for Illumina NGS data. | Read Preprocessing |
| Rsubread | Rsubread is a Bioconductor software package that provides high-performance alignment and read counting functions for RNA-seq reads. | Alignment |
| Picard | Picard is a set of command line tools for manipulating high-throughput sequencing (HTS) data and formats such as SAM/BAM/CRAM and VCF. | Manipulating HTS data |
| Busco | BUSCO assesses genome assembly and annotation completeness with Benchmarking Universal Single-Copy Orthologs. | Quality |
| Hisat2 | HISAT2 is a fast and sensitive alignment program for mapping NGS reads (both DNA and RNA) to reference genomes. | Alignment |
| Tophat2 | TopHat is a fast splice junction mapper for RNA-Seq reads. | Alignment |
| GATK | Variant Discovery in High-Throughput Sequencing Data. | Variant Discovery |
| Trim_galore | Trim Galore is a wrapper around Cutadapt and FastQC to consistently apply adapter and quality trimming to FastQ files. | Read Preprocessing |
| TransDecoder | TransDecoder identifies candidate coding regions within transcript sequences. | Find Coding Regions |
| Trinotate | Trinotate is a comprehensive annotation suite designed for automatic functional annotation of transcriptomes. | Transcriptome Functional Annotation |
| STAR | STAR is an ultrafast universal RNA-seq aligner. | Alignment |
| Trinity | Trinity assembles transcript sequences from Illumina RNA-Seq data. | denovo Transcriptome Assembly |
| MACS2 | MACS2 identifies transcription factor binding sites in ChIP-seq data. | Peak calling |
| Kallisto | kallisto is a program for quantifying abundances of transcripts from RNA-Seq data. | Read counting |
| BCFtools | BCFtools is a program for variant calling and manipulating files in the Variant Call Format (VCF) and its binary counterpart BCF. | Variant Discovery |
| Bismark | Bismark is a program to map bisulfite treated sequencing reads to a genome of interest and perform methylation calls in a single step. | Bisulfite mapping |
| Fastqc | FastQC is a quality control tool for high throughput sequence data. | Quality |
| Blast | BLAST finds regions of similarity between biological sequences. | Blast |
Remember, if you desire to run any of these tools, make sure to have the
respective software installed on your system and configure in the PATH.
There are a few ways to check if the required tools/modules are installed. The easiest way is automatically performed for
users by calling the importWF function. At the end of the import, all required tools and modules are automatically
listed and checked for users.
There are a few other methods that one could use to perform the tool validation, please read details on our website, the Before running section.
18 Workflow commom steps overview
18.1 Project initialization
To create a Workflow within systemPipeR, we can start by defining an empty
container and checking the directory structure:
sal <- SPRproject() 18.1.1 Required packages and resources
The systemPipeR package needs to be loaded (H Backman and Girke 2016).
appendStep(sal) <- LineWise({
library(systemPipeR)
},
step_name = "load_SPR")18.2 Read Preprocessing
18.2.1 Preprocessing with preprocessReads function
The function preprocessReads allows to apply predefined or custom
read preprocessing functions to all FASTQ files referenced in a
SYSargsList container, such as quality filtering or adapter trimming
routines. Internally, preprocessReads uses the FastqStreamer function from
the ShortRead package to stream through large FASTQ files in a
memory-efficient manner. The following example performs adapter trimming with
the trimLRPatterns function from the Biostrings package.
Here, we are appending this step to the SYSargsList object created previously.
All the parameters are defined on the preprocessReads/preprocessReads-pe.yml file.
appendStep(sal) <- SYSargsList(
step_name = "preprocessing",
targets = "targetsPE.txt", dir = TRUE,
wf_file = "preprocessReads/preprocessReads-pe.cwl",
input_file = "preprocessReads/preprocessReads-pe.yml",
dir_path = system.file("extdata/cwl", package = "systemPipeR"),
inputvars = c(
FileName1 = "_FASTQ_PATH1_",
FileName2 = "_FASTQ_PATH2_",
SampleName = "_SampleName_"
),
dependency = c("load_SPR"))After the preprocessing step, the outfiles files can be used to generate the new
targets files containing the paths to the trimmed FASTQ files. The new targets
information can be used for the next workflow step instance, e.g. running the
NGS alignments with the trimmed FASTQ files. The appendStep function is
automatically handling this connectivity between steps. Please check the next
step for more details.
The following example shows how one can design a custom read ‘preprocessReads’
function using utilities provided by the ShortRead package, and then run it
in batch mode with the ‘preprocessReads’ function. Here, it is possible to
replace the function used on the preprocessing step and modify the sal object.
Because it is a custom function, it is necessary to save the part in the R object,
and internally the preprocessReads.doc.R is loading the custom function.
If the R object is saved with a different name (here "param/customFCT.RData"),
please replace that accordingly in the preprocessReads.doc.R.
Please, note that this step is not added to the workflow, here just for demonstration.
First, we defined the custom function in the workflow:
appendStep(sal) <- LineWise(
code = {
filterFct <- function(fq, cutoff = 20, Nexceptions = 0) {
qcount <- rowSums(as(quality(fq), "matrix") <= cutoff, na.rm = TRUE)
# Retains reads where Phred scores are >= cutoff with N exceptions
fq[qcount <= Nexceptions]
}
save(list = ls(), file = "param/customFCT.RData")
},
step_name = "custom_preprocessing_function",
dependency = "preprocessing"
)After, we can edit the input parameter:
yamlinput(sal, "preprocessing")$Fct
yamlinput(sal, "preprocessing", "Fct") <- "'filterFct(fq, cutoff=20, Nexceptions=0)'"
yamlinput(sal, "preprocessing")$Fct ## check the new function
cmdlist(sal, "preprocessing", targets = 1) ## check if the command line was updated with success18.2.2 Preprocessing with TrimGalore!
TrimGalore! is a wrapper tool to consistently apply quality and adapter trimming to fastq files, with some extra functionality for removing Reduced Representation Bisulfite-Seq (RRBS) libraries.
targetspath <- system.file("extdata", "targets.txt", package = "systemPipeR")
appendStep(sal) <- SYSargsList(step_name = "trimGalore",
targets = targetspath, dir = TRUE,
wf_file = "trim_galore/trim_galore-se.cwl",
input_file = "trim_galore/trim_galore-se.yml",
dir_path = system.file("extdata/cwl", package = "systemPipeR"),
inputvars = c(FileName = "_FASTQ_PATH1_", SampleName = "_SampleName_"),
dependency = "load_SPR",
run_step = "optional")18.2.3 Preprocessing with Trimmomatic
Trimmomatic software (Bolger, Lohse, and Usadel 2014) performs a variety of useful trimming tasks for Illumina paired-end and single ended data. Here, an example of how to perform this task using parameters template files for trimming FASTQ files.
targetspath <- system.file("extdata", "targets.txt", package = "systemPipeR")
appendStep(sal) <- SYSargsList(step_name = "trimmomatic",
targets = targetspath, dir = TRUE,
wf_file = "trimmomatic/trimmomatic-se.cwl",
input_file = "trimmomatic/trimmomatic-se.yml",
dir_path = system.file("extdata/cwl", package = "systemPipeR"),
inputvars = c(FileName = "_FASTQ_PATH1_", SampleName = "_SampleName_"),
dependency = "load_SPR",
run_step = "optional")18.3 FASTQ quality report
The following seeFastq and seeFastqPlot functions generate and plot a series of useful
quality statistics for a set of FASTQ files, including per cycle quality box
plots, base proportions, base-level quality trends, relative k-mer
diversity, length, and occurrence distribution of reads, number of reads
above quality cutoffs and mean quality distribution. The results are
written to a PDF file named fastqReport.pdf.
appendStep(sal) <- LineWise(code = {
fastq <- getColumn(sal, step = "preprocessing", "targetsWF", column = 1)
fqlist <- seeFastq(fastq = fastq, batchsize = 10000, klength = 8)
pdf("./results/fastqReport.pdf", height = 18, width = 4*length(fqlist))
seeFastqPlot(fqlist)
dev.off()
}, step_name = "fastq_report",
dependency = "preprocessing")
18.4 NGS Alignment software
After quality control, the sequence reads can be aligned to a reference genome or transcriptome database. The following sessions present some NGS sequence alignment software. Select the most accurate aligner and determining the optimal parameter for your custom data set project.
For all the following examples, it is necessary to install the respective software
and export the PATH accordingly.
18.4.1 Alignment with HISAT2
The following steps will demonstrate how to use the short read aligner Hisat2
(Kim, Langmead, and Salzberg 2015) in both interactive job submissions and batch submissions to
queuing systems of clusters using the systemPipeR's new CWL command-line interface.
- Build
Hisat2index.
appendStep(sal) <- SYSargsList(step_name = "hisat_index",
targets = NULL, dir = FALSE,
wf_file = "hisat2/hisat2-index.cwl",
input_file = "hisat2/hisat2-index.yml",
dir_path = system.file("extdata/cwl", package = "systemPipeR"),
inputvars = NULL,
dependency = "preprocessing")The parameter settings of the aligner are defined in the workflow_hisat2-se.cwl
and workflow_hisat2-se.yml files. The following shows how to construct the
corresponding SYSargsList object, and append to sal workflow.
- Alignment with
HISAT2andSAMtools
It possible to build an workflow with HISAT2 and SAMtools.
appendStep(sal) <- SYSargsList(step_name = "hisat_mapping",
targets = "preprocessing", dir = TRUE,
wf_file = "workflow-hisat2/workflow_hisat2-se.cwl",
input_file = "workflow-hisat2/workflow_hisat2-se.yml",
dir_path = system.file("extdata/cwl", package = "systemPipeR"),
inputvars=c(preprocessReads_se="_FASTQ_PATH1_", SampleName="_SampleName_"),
dependency = c("hisat_index"),
run_session = "remote")18.4.2 Alignment with Tophat2
The NGS reads of this project can also be aligned against the reference genome
sequence using Bowtie2/TopHat2 (Kim et al. 2013; Langmead and Salzberg 2012).
- Build
Bowtie2index.
appendStep(sal) <- SYSargsList(step_name = "bowtie_index",
targets = NULL, dir = FALSE,
wf_file = "bowtie2/bowtie2-index.cwl",
input_file = "bowtie2/bowtie2-index.yml",
dir_path = system.file("extdata/cwl", package = "systemPipeR"),
inputvars = NULL,
dependency = "preprocessing",
run_step = "optional")The parameter settings of the aligner are defined in the workflow_tophat2-mapping.cwl
and tophat2-mapping-pe.yml files. The following shows how to construct the
corresponding SYSargsList object, using the outfiles from the preprocessing step.
appendStep(sal) <- SYSargsList(step_name = "tophat2_mapping",
targets = "preprocessing", dir = TRUE,
wf_file = "tophat2/workflow_tophat2-mapping-se.cwl",
input_file = "tophat2/tophat2-mapping-se.yml",
dir_path = system.file("extdata/cwl", package = "systemPipeR"),
inputvars=c(preprocessReads_se="_FASTQ_PATH1_", SampleName="_SampleName_"),
dependency = c("bowtie_index"),
run_session = "remote",
run_step = "optional")18.4.3 Alignment with Bowtie2 (e.g. for miRNA profiling)
The following example runs Bowtie2 as a single process without submitting it to a cluster.
appendStep(sal) <- SYSargsList(step_name = "bowtie2_mapping",
targets = "preprocessing", dir = TRUE,
wf_file = "bowtie2/workflow_bowtie2-mapping-se.cwl",
input_file = "bowtie2/bowtie2-mapping-se.yml",
dir_path = system.file("extdata/cwl", package = "systemPipeR"),
inputvars=c(preprocessReads_se="_FASTQ_PATH1_", SampleName="_SampleName_"),
dependency = c("bowtie_index"),
run_session = "remote",
run_step = "optional")18.4.4 Alignment with BWA-MEM (e.g. for VAR-Seq)
The following example runs BWA-MEM as a single process without submitting it to a cluster.
- Build the index:
appendStep(sal) <- SYSargsList(step_name = "bwa_index",
targets = NULL, dir = FALSE,
wf_file = "bwa/bwa-index.cwl",
input_file = "bwa/bwa-index.yml",
dir_path = system.file("extdata/cwl", package = "systemPipeR"),
inputvars = NULL,
dependency = "preprocessing",
run_step = "optional")- Prepare the alignment step:
appendStep(sal) <- SYSargsList(step_name = "bwa_mapping",
targets = "preprocessing", dir = TRUE,
wf_file = "bwa/bwa-se.cwl",
input_file = "bwa/bwa-se.yml",
dir_path = system.file("extdata/cwl", package = "systemPipeR"),
inputvars=c(preprocessReads_se="_FASTQ_PATH1_", SampleName="_SampleName_"),
dependency = c("bwa_index"),
run_session = "remote",
run_step = "optional")18.4.5 Alignment with Rsubread (e.g. for RNA-Seq)
The following example shows how one can use within the environment the R-based aligner , allowing running from R or command-line.
- Build the index:
appendStep(sal) <- SYSargsList(step_name = "rsubread_index",
targets = NULL, dir = FALSE,
wf_file = "rsubread/rsubread-index.cwl",
input_file = "rsubread/rsubread-index.yml",
dir_path = system.file("extdata/cwl", package = "systemPipeR"),
inputvars = NULL,
dependency = "preprocessing",
run_step = "optional")- Prepare the alignment step:
appendStep(sal) <- SYSargsList(step_name = "rsubread",
targets = "preprocessing", dir = TRUE,
wf_file = "rsubread/rsubread-mapping-se.cwl",
input_file = "rsubread/rsubread-mapping-se.yml",
dir_path = system.file("extdata/cwl", package = "systemPipeR"),
inputvars=c(preprocessReads_se="_FASTQ_PATH1_", SampleName="_SampleName_"),
dependency = c("rsubread_index"),
run_session = "remote",
run_step = "optional")18.4.6 Alignment with gsnap (e.g. for VAR-Seq and RNA-Seq)
Another R-based short read aligner is gsnap from the gmapR package (Wu and Nacu 2010).
The code sample below introduces how to run this aligner on multiple nodes of a compute cluster.
- Build the index:
appendStep(sal) <- SYSargsList(step_name = "gsnap_index",
targets = NULL, dir = FALSE,
wf_file = "gsnap/gsnap-index.cwl",
input_file = "gsnap/gsnap-index.yml",
dir_path = system.file("extdata/cwl", package = "systemPipeR"),
inputvars = NULL,
dependency = "preprocessing",
run_step = "optional")- Prepare the alignment step:
appendStep(sal) <- SYSargsList(step_name = "gsnap",
targets = "targetsPE.txt", dir = TRUE,
wf_file = "gsnap/gsnap-mapping-pe.cwl",
input_file = "gsnap/gsnap-mapping-pe.yml",
dir_path = system.file("extdata/cwl", package = "systemPipeR"),
inputvars = c(FileName1 = "_FASTQ_PATH1_",
FileName2 = "_FASTQ_PATH2_", SampleName = "_SampleName_"),
dependency = c("gsnap_index"),
run_session = "remote",
run_step = "optional")18.5 Create symbolic links for viewing BAM files in IGV
The genome browser IGV supports reading of indexed/sorted BAM files via web URLs. This way it can be avoided to create unnecessary copies of these large files. To enable this approach, an HTML directory with Http access needs to be available in the user account (e.g. home/publichtml) of a system. If this is not the case then the BAM files need to be moved or copied to the system where IGV runs. In the following, htmldir defines the path to the HTML directory with http access where the symbolic links to the BAM files will be stored. The corresponding URLs will be written to a text file specified under the _urlfile_ argument.
appendStep(sal) <- LineWise(
code = {
bampaths <- getColumn(sal, step = "hisat2_mapping", "outfiles",
column = "samtools_sort_bam")
symLink2bam(
sysargs = bampaths, htmldir = c("~/.html/", "somedir/"),
urlbase = "http://cluster.hpcc.ucr.edu/~tgirke/",
urlfile = "./results/IGVurl.txt")
},
step_name = "bam_IGV",
dependency = "hisat2_mapping",
run_step = "optional"
)18.6 Read counting for mRNA profiling experiments
Create txdb (needs to be done only once).
appendStep(sal) <- LineWise(code = {
library(GenomicFeatures)
txdb <- makeTxDbFromGFF(file="data/tair10.gff", format="gff",
dataSource="TAIR", organism="Arabidopsis thaliana")
saveDb(txdb, file="./data/tair10.sqlite")
},
step_name = "create_txdb",
dependency = "hisat_mapping")The following performs read counting with summarizeOverlaps in parallel mode with multiple cores.
appendStep(sal) <- LineWise({
library(BiocParallel)
txdb <- loadDb("./data/tair10.sqlite")
eByg <- exonsBy(txdb, by="gene")
outpaths <- getColumn(sal, step = "hisat_mapping", 'outfiles', column = 2)
bfl <- BamFileList(outpaths, yieldSize=50000, index=character())
multicoreParam <- MulticoreParam(workers=4); register(multicoreParam); registered()
counteByg <- bplapply(bfl, function(x) summarizeOverlaps(eByg, x, mode="Union",
ignore.strand=TRUE,
inter.feature=TRUE,
singleEnd=TRUE))
# Note: for strand-specific RNA-Seq set 'ignore.strand=FALSE' and for PE data set 'singleEnd=FALSE'
countDFeByg <- sapply(seq(along=counteByg),
function(x) assays(counteByg[[x]])$counts)
rownames(countDFeByg) <- names(rowRanges(counteByg[[1]]))
colnames(countDFeByg) <- names(bfl)
rpkmDFeByg <- apply(countDFeByg, 2, function(x) returnRPKM(counts=x, ranges=eByg))
write.table(countDFeByg, "results/countDFeByg.xls",
col.names=NA, quote=FALSE, sep="\t")
write.table(rpkmDFeByg, "results/rpkmDFeByg.xls",
col.names=NA, quote=FALSE, sep="\t")
},
step_name = "read_counting",
dependency = "create_txdb")Please note, in addition to read counts this step generates RPKM normalized expression values. For most statistical differential expression or abundance analysis methods, such as edgeR or DESeq2, the raw count values should be used as input. The usage of RPKM values should be restricted to specialty applications required by some users, e.g. manually comparing the expression levels of different genes or features.
18.6.0.1 Read and alignment count stats
Generate a table of read and alignment counts for all samples.
appendStep(sal) <- LineWise({
read_statsDF <- alignStats(args)
write.table(read_statsDF, "results/alignStats.xls",
row.names = FALSE, quote = FALSE, sep = "\t")
},
step_name = "align_stats",
dependency = "hisat_mapping")The following shows the first four lines of the sample alignment stats file
provided by the systemPipeR package. For simplicity the number of PE reads
is multiplied here by 2 to approximate proper alignment frequencies where each
read in a pair is counted.
read.table(system.file("extdata", "alignStats.xls", package = "systemPipeR"), header = TRUE)[1:4,]## FileName Nreads2x Nalign Perc_Aligned Nalign_Primary Perc_Aligned_Primary
## 1 M1A 192918 177961 92.24697 177961 92.24697
## 2 M1B 197484 159378 80.70426 159378 80.70426
## 3 A1A 189870 176055 92.72397 176055 92.72397
## 4 A1B 188854 147768 78.24457 147768 78.2445718.7 Read counting for miRNA profiling experiments
Download miRNA genes from miRBase.
appendStep(sal) <- LineWise({
system("wget https://www.mirbase.org/ftp/CURRENT/genomes/ath.gff3 -P ./data/")
gff <- rtracklayer::import.gff("./data/ath.gff3")
gff <- split(gff, elementMetadata(gff)$ID)
bams <- getColumn(sal, step = "bowtie2_mapping", 'outfiles', column = 2)
bfl <- BamFileList(bams, yieldSize=50000, index=character())
countDFmiR <- summarizeOverlaps(gff, bfl, mode="Union",
ignore.strand = FALSE, inter.feature = FALSE)
countDFmiR <- assays(countDFmiR)$counts
# Note: inter.feature=FALSE important since pre and mature miRNA ranges overlap
rpkmDFmiR <- apply(countDFmiR, 2, function(x) returnRPKM(counts = x, ranges = gff))
write.table(assays(countDFmiR)$counts, "results/countDFmiR.xls",
col.names=NA, quote=FALSE, sep="\t")
write.table(rpkmDFmiR, "results/rpkmDFmiR.xls", col.names=NA, quote=FALSE, sep="\t")
},
step_name = "read_counting_mirna",
dependency = "bowtie2_mapping")18.8 Correlation analysis of samples
The following computes the sample-wise Spearman correlation coefficients from the rlog (regularized-logarithm) transformed expression values generated with the DESeq2 package. After transformation to a distance matrix, hierarchical clustering is performed with the hclust function and the result is plotted as a dendrogram (sample_tree.pdf).
appendStep(sal) <- LineWise({
library(DESeq2, warn.conflicts=FALSE, quietly=TRUE)
library(ape, warn.conflicts=FALSE)
countDFpath <- system.file("extdata", "countDFeByg.xls", package="systemPipeR")
countDF <- as.matrix(read.table(countDFpath))
colData <- data.frame(row.names = targetsWF(sal)[[2]]$SampleName,
condition=targetsWF(sal)[[2]]$Factor)
dds <- DESeqDataSetFromMatrix(countData = countDF, colData = colData,
design = ~ condition)
d <- cor(assay(rlog(dds)), method = "spearman")
hc <- hclust(dist(1-d))
plot.phylo(as.phylo(hc), type = "p", edge.col = 4, edge.width = 3,
show.node.label = TRUE, no.margin = TRUE)
},
step_name = "sample_tree_rlog",
dependency = "read_counting")
rlog values.
18.9 DEG analysis with edgeR
The following run_edgeR function is a convenience wrapper for
identifying differentially expressed genes (DEGs) in batch mode with
edgeR’s GML method (Robinson, McCarthy, and Smyth 2010) for any number of
pairwise sample comparisons specified under the cmp argument. Users
are strongly encouraged to consult the
edgeR vignette
for more detailed information on this topic and how to properly run edgeR
on data sets with more complex experimental designs.
appendStep(sal) <- LineWise({
targetspath <- system.file("extdata", "targets.txt", package = "systemPipeR")
targets <- read.delim(targetspath, comment = "#")
cmp <- readComp(file = targetspath, format = "matrix", delim = "-")
countDFeBygpath <- system.file("extdata", "countDFeByg.xls", package = "systemPipeR")
countDFeByg <- read.delim(countDFeBygpath, row.names = 1)
edgeDF <- run_edgeR(countDF = countDFeByg, targets = targets, cmp = cmp[[1]],
independent = FALSE, mdsplot = "")
DEG_list <- filterDEGs(degDF = edgeDF, filter = c(Fold = 2, FDR = 10))
},
step_name = "edger",
dependency = "read_counting")Filter and plot DEG results for up and down-regulated genes. Because of the small size of the toy data set used by this vignette, the FDR value has been set to a relatively high threshold (here 10%). More commonly used FDR cutoffs are 1% or 5%. The definition of ‘up’ and ‘down’ is given in the corresponding help file. To open it, type ?filterDEGs in the R console.
edgeR.
18.10 DEG analysis with DESeq2
The following run_DESeq2 function is a convenience wrapper for
identifying DEGs in batch mode with DESeq2 (Love, Huber, and Anders 2014) for any number of
pairwise sample comparisons specified under the cmp argument. Users
are strongly encouraged to consult the
DESeq2 vignette
for more detailed information on this topic and how to properly run DESeq2
on data sets with more complex experimental designs.
appendStep(sal) <- LineWise({
degseqDF <- run_DESeq2(countDF=countDFeByg, targets=targets, cmp=cmp[[1]],
independent=FALSE)
DEG_list2 <- filterDEGs(degDF=degseqDF, filter=c(Fold=2, FDR=10))
},
step_name = "deseq2",
dependency = "read_counting")18.11 Venn Diagrams
The function overLapper can compute Venn intersects for large numbers of sample sets (up to 20 or more) and vennPlot can plot 2-5 way Venn diagrams. A useful feature is the possibility to combine the counts from several Venn comparisons with the same number of sample sets in a single Venn diagram (here for 4 up and down DEG sets).
appendStep(sal) <- LineWise({
vennsetup <- overLapper(DEG_list$Up[6:9], type="vennsets")
vennsetdown <- overLapper(DEG_list$Down[6:9], type="vennsets")
vennPlot(list(vennsetup, vennsetdown), mymain="", mysub="",
colmode=2, ccol=c("blue", "red"))
},
step_name = "vennplot",
dependency = "edger")
18.12 GO term enrichment analysis of DEGs
18.12.1 Obtain gene-to-GO mappings
The following shows how to obtain gene-to-GO mappings from biomaRt (here for A. thaliana) and how to organize them for the downstream GO term enrichment analysis. Alternatively, the gene-to-GO mappings can be obtained for many organisms from Bioconductor’s *.db genome annotation packages or GO annotation files provided by various genome databases. For each annotation, this relatively slow preprocessing step needs to be performed only once. Subsequently, the preprocessed data can be loaded with the load function as shown in the next subsection.
appendStep(sal) <- LineWise({
library("biomaRt")
listMarts() # To choose BioMart database
listMarts(host="plants.ensembl.org")
m <- useMart("plants_mart", host="https://plants.ensembl.org")
listDatasets(m)
m <- useMart("plants_mart", dataset="athaliana_eg_gene", host="https://plants.ensembl.org")
listAttributes(m) # Choose data types you want to download
go <- getBM(attributes=c("go_id", "tair_locus", "namespace_1003"), mart=m)
go <- go[go[,3]!="",]; go[,3] <- as.character(go[,3])
go[go[,3]=="molecular_function", 3] <- "F"
go[go[,3]=="biological_process", 3] <- "P"
go[go[,3]=="cellular_component", 3] <- "C"
go[1:4,]
dir.create("./data/GO")
write.table(go, "data/GO/GOannotationsBiomart_mod.txt",
quote=FALSE, row.names=FALSE, col.names=FALSE, sep="\t")
catdb <- makeCATdb(myfile="data/GO/GOannotationsBiomart_mod.txt",
lib=NULL, org="", colno=c(1,2,3), idconv=NULL)
save(catdb, file="data/GO/catdb.RData")
},
step_name = "get_go_biomart",
dependency = "edger")18.12.2 Batch GO term enrichment analysis
Apply the enrichment analysis to the DEG sets obtained in the above differential expression analysis. Note, in the following example the FDR filter is set here to an unreasonably high value, simply because of the small size of the toy data set used in this vignette. Batch enrichment analysis of many gene sets is performed with the GOCluster_Report function. When method="all", it returns all GO terms passing the p-value cutoff specified under the cutoff arguments. When method="slim", it returns only the GO terms specified under the myslimv argument. The given example shows how one can obtain such a GO slim vector from BioMart for a specific organism.
appendStep(sal) <- LineWise({
load("data/GO/catdb.RData")
DEG_list <- filterDEGs(degDF=edgeDF, filter=c(Fold=2, FDR=50), plot=FALSE)
up_down <- DEG_list$UporDown; names(up_down) <- paste(names(up_down), "_up_down", sep="")
up <- DEG_list$Up; names(up) <- paste(names(up), "_up", sep="")
down <- DEG_list$Down; names(down) <- paste(names(down), "_down", sep="")
DEGlist <- c(up_down, up, down)
DEGlist <- DEGlist[sapply(DEGlist, length) > 0]
BatchResult <- GOCluster_Report(catdb=catdb, setlist=DEGlist, method="all",
id_type="gene", CLSZ=2, cutoff=0.9,
gocats=c("MF", "BP", "CC"), recordSpecGO=NULL)
library("biomaRt")
m <- useMart("plants_mart", dataset="athaliana_eg_gene", host="https://plants.ensembl.org")
goslimvec <- as.character(getBM(attributes=c("goslim_goa_accession"), mart=m)[,1])
BatchResultslim <- GOCluster_Report(catdb=catdb, setlist=DEGlist, method="slim",
id_type="gene", myslimv=goslimvec, CLSZ=10,
cutoff=0.01, gocats=c("MF", "BP", "CC"),
recordSpecGO=NULL)
gos <- BatchResultslim[grep("M6-V6_up_down", BatchResultslim$CLID), ]
gos <- BatchResultslim
pdf("GOslimbarplotMF.pdf", height=8, width=10); goBarplot(gos, gocat="MF"); dev.off()
goBarplot(gos, gocat="BP")
goBarplot(gos, gocat="CC")
},
step_name = "go_enrichment",
dependency = "get_go_biomart")18.12.3 Plot batch GO term results
The data.frame generated by GOCluster_Report can be plotted with the goBarplot function. Because of the variable size of the sample sets, it may not always be desirable to show the results from different DEG sets in the same bar plot. Plotting single sample sets is achieved by subsetting the input data frame as shown in the first line of the following example.
18.13 Clustering and heat maps
The following example performs hierarchical clustering on the rlog transformed expression matrix subsetted by the DEGs identified in the
above differential expression analysis. It uses a Pearson correlation-based distance measure and complete linkage for cluster join.
appendStep(sal) <- LineWise({
library(pheatmap)
geneids <- unique(as.character(unlist(DEG_list[[1]])))
y <- assay(rlog(dds))[geneids, ]
pdf("heatmap1.pdf")
pheatmap(y, scale="row", clustering_distance_rows="correlation",
clustering_distance_cols="correlation")
dev.off()
},
step_name = "hierarchical_clustering",
dependency = c("sample_tree_rlog", "edgeR"))
18.14 Visualize workflow
systemPipeR workflows instances can be visualized with the plotWF function.
This function will make a plot of selected workflow instance and the following information is displayed on the plot:
- Workflow structure (dependency graphs between different steps);
- Workflow step status, e.g.
Success,Error,Pending,Warnings; - Sample status and statistics;
- Workflow timing: running duration time.
If no argument is provided, the basic plot will automatically detect width, height, layout, plot method, branches, etc.
plotWF(sal, show_legend = TRUE, width = "80%")To check more details of plotWF, visit our website.
18.15 Running workflow
18.15.1 Interactive job submissions in a single machine
For running the workflow, runWF function will execute all the steps store in
the workflow container. The execution will be on a single machine without
submitting to a queuing system of a computer cluster.
sal <- runWF(sal)18.15.2 Parallelization on clusters
Alternatively, the computation can be greatly accelerated by processing many files in parallel using several compute nodes of a cluster, where a scheduling/queuing system is used for load balancing.
The resources list object provides the number of independent parallel cluster
processes defined under the Njobs element in the list. The following example
will run 18 processes in parallel using each 4 CPU cores.
If the resources available on a cluster allow running all 18 processes at the
same time, then the shown sample submission will utilize in a total of 72 CPU cores.
Note, runWF can be used with most queueing systems as it is based on utilities
from the batchtools package, which supports the use of template files (*.tmpl)
for defining the run parameters of different schedulers. To run the following
code, one needs to have both a conffile (see .batchtools.conf.R samples here)
and a template file (see *.tmpl samples here)
for the queueing available on a system. The following example uses the sample
conffile and template files for the Slurm scheduler provided by this package.
The resources can be appended when the step is generated, or it is possible to
add these resources later, as the following example using the addResources
function:
resources <- list(conffile=".batchtools.conf.R",
template="batchtools.slurm.tmpl",
Njobs=18,
walltime=120, ## minutes
ntasks=1,
ncpus=4,
memory=1024, ## Mb
partition = "short"
)
sal <- addResources(sal, c("hisat2_mapping"), resources = resources)
sal <- runWF(sal)18.15.3 Checking workflow status
To check the summary of the workflow, we can use:
sal
statusWF(sal)18.15.4 Accessing logs report
systemPipeR compiles all the workflow execution logs in one central location,
making it easier to check any standard output (stdout) or standard error
(stderr) for any command-line tools used on the workflow or the R code stdout.
sal <- renderLogs(sal)19 Version information
sessionInfo()## R version 4.3.1 (2023-06-16)
## Platform: x86_64-pc-linux-gnu (64-bit)
## Running under: Ubuntu 22.04.3 LTS
##
## Matrix products: default
## BLAS: /home/biocbuild/bbs-3.18-bioc/R/lib/libRblas.so
## LAPACK: /usr/lib/x86_64-linux-gnu/lapack/liblapack.so.3.10.0
##
## locale:
## [1] LC_CTYPE=en_US.UTF-8 LC_NUMERIC=C LC_TIME=en_GB
## [4] LC_COLLATE=C LC_MONETARY=en_US.UTF-8 LC_MESSAGES=en_US.UTF-8
## [7] LC_PAPER=en_US.UTF-8 LC_NAME=C LC_ADDRESS=C
## [10] LC_TELEPHONE=C LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C
##
## time zone: America/New_York
## tzcode source: system (glibc)
##
## attached base packages:
## [1] stats4 stats graphics grDevices utils datasets methods base
##
## other attached packages:
## [1] magrittr_2.0.3 systemPipeR_2.8.0 ShortRead_1.60.0
## [4] GenomicAlignments_1.38.0 SummarizedExperiment_1.32.0 Biobase_2.62.0
## [7] MatrixGenerics_1.14.0 matrixStats_1.0.0 BiocParallel_1.36.0
## [10] Rsamtools_2.18.0 Biostrings_2.70.0 XVector_0.42.0
## [13] GenomicRanges_1.54.0 GenomeInfoDb_1.38.0 IRanges_2.36.0
## [16] S4Vectors_0.40.0 BiocGenerics_0.48.0 BiocStyle_2.30.0
##
## loaded via a namespace (and not attached):
## [1] tidyselect_1.2.0 viridisLite_0.4.2 dplyr_1.1.3 farver_2.1.1
## [5] bitops_1.0-7 fastmap_1.1.1 RCurl_1.98-1.12 digest_0.6.33
## [9] lifecycle_1.0.3 ellipsis_0.3.2 compiler_4.3.1 rlang_1.1.1
## [13] sass_0.4.7 tools_4.3.1 utf8_1.2.4 yaml_2.3.7
## [17] systemPipeRdata_2.5.1 knitr_1.44 S4Arrays_1.2.0 labeling_0.4.3
## [21] htmlwidgets_1.6.2 interp_1.1-4 DelayedArray_0.28.0 xml2_1.3.5
## [25] RColorBrewer_1.1-3 abind_1.4-5 withr_2.5.1 hwriter_1.3.2.1
## [29] grid_4.3.1 fansi_1.0.5 latticeExtra_0.6-30 colorspace_2.1-0
## [33] ggplot2_3.4.4 scales_1.2.1 cli_3.6.1 rmarkdown_2.25
## [37] crayon_1.5.2 generics_0.1.3 remotes_2.4.2.1 rstudioapi_0.15.0
## [41] httr_1.4.7 cachem_1.0.8 stringr_1.5.0 zlibbioc_1.48.0
## [45] rvest_1.0.3 parallel_4.3.1 BiocManager_1.30.22 vctrs_0.6.4
## [49] webshot_0.5.5 Matrix_1.6-1.1 jsonlite_1.8.7 bookdown_0.36
## [53] systemfonts_1.0.5 jpeg_0.1-10 magick_2.8.1 crosstalk_1.2.0
## [57] jquerylib_0.1.4 glue_1.6.2 codetools_0.2-19 DT_0.30
## [61] stringi_1.7.12 gtable_0.3.4 deldir_1.0-9 munsell_0.5.0
## [65] tibble_3.2.1 pillar_1.9.0 htmltools_0.5.6.1 GenomeInfoDbData_1.2.11
## [69] R6_2.5.1 evaluate_0.22 kableExtra_1.3.4 lattice_0.22-5
## [73] png_0.1-8 bslib_0.5.1 Rcpp_1.0.11 svglite_2.1.2
## [77] SparseArray_1.2.0 xfun_0.40 pkgconfig_2.0.320 Funding
This project is funded by NSF award ABI-1661152.
References
Amstutz, Peter, Michael R Crusoe, Nebojša Tijanić, Brad Chapman, John Chilton, Michael Heuer, Andrey Kartashov, et al. 2016. “Common Workflow Language, V1.0,” July. https://doi.org/10.6084/m9.figshare.3115156.v2.
Bolger, Anthony M, Marc Lohse, and Bjoern Usadel. 2014. “Trimmomatic: A Flexible Trimmer for Illumina Sequence Data.” Bioinformatics 30 (15): 2114–20.
Crusoe, Michael R, Sanne Abeln, Alexandru Iosup, Peter Amstutz, John Chilton, Nebojša Tijanić, Hervé Ménager, Stian Soiland-Reyes, Bogdan Gavrilovic, and Carole Goble. 2021. “Methods Included: Standardizing Computational Reuse and Portability with the Common Workflow Language,” May. http://arxiv.org/abs/2105.07028.
H Backman, Tyler W, and Thomas Girke. 2016. “systemPipeR: NGS workflow and report generation environment.” BMC Bioinformatics 17 (1): 388. https://doi.org/10.1186/s12859-016-1241-0.
Howard, Brian E, Qiwen Hu, Ahmet Can Babaoglu, Manan Chandra, Monica Borghi, Xiaoping Tan, Luyan He, et al. 2013. “High-Throughput RNA Sequencing of Pseudomonas-Infected Arabidopsis Reveals Hidden Transcriptome Complexity and Novel Splice Variants.” PLoS One 8 (10): e74183. https://doi.org/10.1371/journal.pone.0074183.
Kim, Daehwan, Ben Langmead, and Steven L Salzberg. 2015. “HISAT: A Fast Spliced Aligner with Low Memory Requirements.” Nat. Methods 12 (4): 357–60.
Kim, Daehwan, Geo Pertea, Cole Trapnell, Harold Pimentel, Ryan Kelley, and Steven L Salzberg. 2013. “TopHat2: Accurate Alignment of Transcriptomes in the Presence of Insertions, Deletions and Gene Fusions.” Genome Biol. 14 (4): R36. https://doi.org/10.1186/gb-2013-14-4-r36.
Langmead, Ben, and Steven L Salzberg. 2012. “Fast Gapped-Read Alignment with Bowtie 2.” Nat. Methods 9 (4): 357–59. https://doi.org/10.1038/nmeth.1923.
Love, Michael, Wolfgang Huber, and Simon Anders. 2014. “Moderated Estimation of Fold Change and Dispersion for RNA-seq Data with DESeq2.” Genome Biol. 15 (12): 550. https://doi.org/10.1186/s13059-014-0550-8.
Robinson, M D, D J McCarthy, and G K Smyth. 2010. “EdgeR: A Bioconductor Package for Differential Expression Analysis of Digital Gene Expression Data.” Bioinformatics 26 (1): 139–40. https://doi.org/10.1093/bioinformatics/btp616.
Wu, T D, and S Nacu. 2010. “Fast and SNP-tolerant Detection of Complex Variants and Splicing in Short Reads.” Bioinformatics 26 (7): 873–81. https://doi.org/10.1093/bioinformatics/btq057.