Contents

1 Introduction

The PharmacoSet class is structured to contain several different types of genomic data, as well as drug dose response data. It is built upon base R data types and the SummarizedExperiment class. However, a PharmacoSet object requires the presence of specific annotations for the data to be able to function correctly with the function provided in PharmacoGx. The structure allows users to then interrogate the data on the basis of cells and drugs, removing the need for the user to deal with single experiments. We do not recommend creating PharmacoSet objects by the end users, rather we recommend contacting us to have the objects created for your dataset of interest. However, for completeness and power users the process and structure is documented below.

2 PharmacoSet Structure

The base PharmacoSet structure is as follows:

2.1 sample

Previously called @cell.

This slot contains a data.frame which contains information about all the cells profiles across all the data types in the PharamcoSet, including both perturbation and sensitivity experiments. It is crucial for the rownames of each entry in the data frame to be the unique cell identifier used across all the datatypes for each cell type. The content of this data frame will vary based on what information each dataset provides. Mandatory columns in this data frame must be sampleid, which should be equivalent to the rownames and tissueid, which contains a curated annotation of the source tissue for each cell line.

2.2 treatment

Previously called @drug.

This slot contains a data.frame which contains information about all the drugs profiled across all the data types in the PharmacoSet, including both perturbation and sensitivity experiments. Similar to the sample slot, it is crucial for the rownames of each entry in the data frame to be the unique compound identifier used across all the datatypes for each compound. Once again, the content in this data frame will vary based on information provided by each dataset. Mandatory columns must be treatmentid, which should be equivalent to the object rownames.

2.3 curation:

This slot contains three data.frames, one for drugs, tissues, and cells. Each contains two columns, the first with the unique identifier that is used between all PharmacoSet objects for this drug, and the second with the identifier used within the dataset. At this time there is no set method to find the unique identifiers between all PharmacoSets for arbitrary drugs, as much labour intensive curation has gone into carefully matching identifiers between datasets. However, these tables are used only by the intersecting function, and all other functions will function without this data, therefore for PharmacoSet objects created by users, we recommend just filling both columns with the identifiers used in the datasets, to allow for at least some matching to be done.

  • sample: data frame annotating all cell-lines investigated in the study.
  • treatment: data frame annotating all the compounds investigated in the study.
  • tissue: data.frame annotating all tissues investigated in the study.

2.4 molecularProfiles:

  • List of SummarizedExperiment objects containing the molecular profiles of the cell lines, such as mutations, gene expressions, or copy number variations.

The molecular profiles slot of a PharmacoSet object contains all the molecular expression data profiled in the dataset. Each type of data is kept in a separate SummarizedExperiment (SE) object, and they are all stored as a list. However, to insure coordination between data types, there are specific annotations that must be included in the SummarizedExperiment object. The annotations also differ slightly in the cases of perturbation and sensitivity datasets.

First of all, each SummarizedExperiment object must be labelled with the type of dataincluded within the object. Currently only mutation, fusion, and rna molecular data types are recognized and handled differently by summarizing and signature generating functions. This labelling is done by calling, for example:

SE@annotation <- "rna"

The phenoData in each SummarizedExperiment object also needs to contain specific columns labelling each experiment. For sensitivity type datasets, this has to include:

sampleid: This column contains a cell identifier that matches exactly the rownames of the sample slot of the PSet. batchid: This column contains and id of the batch of each experiment. If such data is not available then it is customary to fill with NA, but this column must be present.

Additionally, for the perturbation type datasets, there are several more columns of metadata that must be included to enable the modelling of differential gene expression. These are:

treatmentid: The identifier of the drug used in each experiment when a compound was applied. For controls, it should be left as NA. These must match exactly to the rownames of the treatment slot in the PharmacoSet.

duration: If available, the ength of the experiment. Should be 0 for controls.

concentration: For experiments where compounds were applied, the concentration. Should be 0 for controls.

xptype: A label of either perturbation, of control respectively.

Otherwise each SummarizedExperiment object should be constructed as specified by the SummarizedExperiment package.

Once these SummarizedExperiment objects are created, they should be added to a list, with the name of each object in the list being descriptive of the type of data contained.

2.5 datasetType

This slot is being deprecated, since perturbation data can effectively before stored in the colData slot of the SummarizedExperiment in the molecularProfiles slot

The datasetType slot is a character string which signifies whether the PharmacoSet contains drug dose sensitivity data, genomic perturbation data, or both. This slot is necessary for the subsetting and intersecting function to be aware of what data types they should be looking for.

2.6 treatmentResponse:

Previously called @sensitivity this slot contains viability measurements for cell-lines treated with different therapeutic compounds.

  • n: Number of experiments for each cell line treated with a given drug.
  • info: Metadata for each pharmacological experiment.
  • raw: All cell viability measurements at each drug concentration from the drug dose-response curves.
  • profiles: Drug sensitivity values summarizing each dose-response curve (IC\(_{50}\), AUC, etc.)

This slot is currently being redesigned to support drug combination experiments. See the LongTable vignette for information about the new data strucutre.

This is a list containing all the data pertaining to drug dose response experiments, usually only present in sensitivity or both type datasets. This includes the names the following names slots in the list:

info: Metadata for each pharmacological experiment stored in a data.frame. Each row of this data.frame should be labelled with a unique experiment identifier. This data.frame must also contain specific columns:

sampleid: Contains a cell identifier that matches exactly the rownames of the cell slot of the PSet.

treatmentid: The identifier of the drug used in each experiment when a compound was applied. These must match exactly to the rownames of the drug slot in the PharmacoSet.

raw: This is a 3-D array of raw drug dose response data. The first dimension is the experiments, with the names of each row in this dimension labelled exactly as the experiment ids used in the metadata data.frame info above. The second dimension is the doses, with each “column” labelled as doses, where the number is the column number. This is as long as there are different number of doses for each experiment. The third dimension is always fixed at 2, with names Dose, and Viability. Dose contains the actual dose used (usually in micro-molar), while viability contains the cell viability measurement at that dose. Therefore, for each experiment there are two vectors, one of doses and one of viabilities at each dose.

profiles This is a data.frame containing down the rows, with exactly matching rownames, the experiments as labelled in the info data.frame, and each column being a summary of the drug dose sensitivity, such as auc\_published or ic50\_published, as published with the data.

n This is a matrix containing cellids matching exactly the rownames of the cell slot of the PSet down the rows, and drugids matching exactly the rownames of the drug slot in the columns. This data.frame summaries how many experiments are in the data for each pair, allowing quick identification of what pairs were tested together. Note that this does not need to be generated before constructing the object, it is generated by the constructor.

2.7 perturbation:

This slot is being deprecated, as discussed above in datasetType.

  • n: Number of experiments for each cell line perturbed by a given drug, for each molecular data type
  • profiles: The metadata for the perturbation experiments is available for each molecular type by calling the appropriate info function

curation: list of data frames containing the mapping between original drug, cell line, and tissue names to standardized identifiers.

This slot is fully filled by the constructor, so nothing needs to be created for it.

n: This is a 3-D array containing cellids matching exactly the rownames of the cell slot of the PSet down the rows, and drugids matching exactly the rownames of the drug slot in the columns, and the third dimension being the names of the different molecular profile types. This array summarizes how many perturbation experiments are in each molecular data type for each pair, allowing quick identification of what pairs were tested together.

info: This is always exactly the string referring to each data type separately: ‘The metadata for the perturbation experiments is available for each molecular type by calling the appropriate info function’

2.8 annotation

The annotation slot contains information pertaining to the PharmacoSet as a whole, including the full information on what packages were loaded into R when the PharmacoSet was created, as well as the date and call to the constructor. The only data that must be entered upon creation of the object is the name of the PharmacoSet, which is passed to the constructor.

  • name: Acronym of the pharmacogenomic dataset.
  • dateCreated: When the object was created.
  • sessionInfo: Software environment used to create the object.
  • call: Set of parameters used to create the object.

3 Creating the PharmacoSet

Once all the data is in the proper format, it can be passed to a the constructor function as below:

PharmacoSet(name,
            molecularProfiles=list(),
            sample=data.frame(),
            treatment=data.frame(),
            sensitivityInfo=data.frame(),
            sensitivityRaw=array(dim=c(0,0,0)),
            sensitivityProfiles=matrix(),
            curationTreatment=data.frame(),
            curationSample=data.frame(),
            curationTissue=data.frame(),
            datasetType=c("sensitivity", "perturbation", "both"),
            verify = TRUE)

Here, name is the name of the PharmacoSet as described in annotations above, molecularProfiles is the list of ExpressionSet objects described above, cell and drug are the data.frames in the cell and drug slots. The sensitivityInfo, sensitivityRaw, sensitivityProfiles are the elements of the sensitivity slot, and curationTreatment, curationSample, and curationTissue the contents of the curation slot. Finally, datasetType is a string to signify which type of data isincluded in the datset, and verify is a flag for running the verification of the pSet after its construction. Any data detailed above but missing from this constructor call will be created by the constructor, and the default empty values are as in the call above. Notice that none of the values should be set as NA, they should be omited if the data is not being provided.