Contents

1 Vignette Version

This vignette was built using CoGAPS version:

packageVersion("CoGAPS")
## [1] '3.20.0'

2 Introduction

Coordinated Gene Association in Pattern Sets (CoGAPS) is a technique for latent space learning in gene expression data. CoGAPS is a member of the Nonnegative Matrix Factorization (NMF) class of algorithms. NMFs factorize a data matrix into two related matrices containing gene weights, the Amplitude (A) matrix, and sample weights, the Pattern (P) Matrix. Each column of A or row of P defines a feature and together this set of features defines the latent space among genes and samples, respectively. In NMF, the values of the elements in the A and P matrices are constrained to be greater than or equal to zero. This constraint simultaneously reflects the non-negative nature of gene expression data and enforces the additive nature of the resulting feature dimensions, generating solutions that are biologically intuitive to interpret (Seung and Lee (1999)).

3 Software Setup

CoGAPS can be installed directly from the FertigLab Github Repository using R devtools or from Bioconductor

devtools::install_github("FertigLab/CoGAPS")

# To install via BioConductor:
install.packages("BiocManager")
BiocManager::install("FertigLab/CoGAPS")

When CoGAPS has installed correctly, you will see this message:

** installing vignettes

** testing if installed package can be loaded from temporary location

** checking absolute paths in shared objects and dynamic libraries

** testing if installed package can be loaded from final location

** testing if installed package keeps a record of temporary installation path

* DONE (CoGAPS)

4 Running CoGAPS on Simulated Toy Data

We first give a walkthrough of the package features using a simple, simulated data set. In later sections we provide two example workflows on real data sets.

Import the CoGAPS library with the following command:

library(CoGAPS)

To ensure CoGAPS is working properly, we will first load in the simulated toy data for a test run.

Single-cell data will be loaded later in this file.

modsimdata <- read.table("../data/ModSimData.txt")
# input to CoGAPS
modsimdata
##          V1      V2      V3      V4      V5     V6      V7      V8      V9
## 1  0.077764 0.94742  4.2487  7.0608  4.8730 4.2687  9.1061 12.6020  9.0283
## 2  0.081467 0.99253  4.4507  7.3906  5.0387 4.1205  8.5843 11.8690  8.5029
## 3  0.085170 1.03760  4.6527  7.7204  5.2044 3.9723  8.0626 11.1360  7.9775
## 4  0.088873 1.08270  4.8547  8.0502  5.3700 3.8241  7.5408 10.4030  7.4521
## 5  0.092576 1.12790  5.0567  8.3800  5.5357 3.6759  7.0190  9.6695  6.9266
## 6  0.096279 1.17300  5.2587  8.7098  5.7014 3.5277  6.4973  8.9362  6.4012
## 7  0.099982 1.21810  5.4607  9.0396  5.8670 3.3795  5.9755  8.2030  5.8758
## 8  0.103680 1.26320  5.6627  9.3694  6.0327 3.2313  5.4538  7.4698  5.3503
## 9  0.107390 1.30830  5.8647  9.6992  6.1984 3.0831  4.9320  6.7366  4.8249
## 10 0.111090 1.35340  6.0667 10.0290  6.3640 2.9349  4.4103  6.0034  4.2995
## 11 0.044437 0.54138  2.4277  4.0319  2.7547 2.2811  4.7735  6.6014  4.7299
## 12 0.055810 0.67994  3.0488  5.0588  3.4079 2.5904  5.2490  7.2493  5.1939
## 13 0.067184 0.81850  3.6700  6.0857  4.0611 2.8996  5.7244  7.8973  5.6579
## 14 0.078557 0.95707  4.2911  7.1127  4.7144 3.2089  6.1998  8.5453  6.1219
## 15 0.089931 1.09560  4.9122  8.1396  5.3676 3.5182  6.6752  9.1932  6.5859
## 16 0.101300 1.23420  5.5333  9.1665  6.0208 3.8274  7.1506  9.8412  7.0500
## 17 0.112680 1.37280  6.1545 10.1930  6.6740 4.1367  7.6260 10.4890  7.5140
## 18 0.124050 1.51130  6.7756 11.2200  7.3272 4.4460  8.1014 11.1370  7.9780
## 19 0.135420 1.64990  7.3967 12.2470  7.9804 4.7552  8.5768 11.7850  8.4420
## 20 0.146800 1.78840  8.0179 13.2740  8.6337 5.0645  9.0523 12.4330  8.9060
## 21 0.158170 1.92700  8.6390 14.3010  9.2869 5.3738  9.5277 13.0810  9.3700
## 22 0.169550 2.06560  9.2601 15.3280  9.9401 5.6830 10.0030 13.7290  9.8341
## 23 0.180920 2.20410  9.8812 16.3550 10.5930 5.9923 10.4780 14.3770 10.2980
## 24 0.192290 2.34270 10.5020 17.3820 11.2470 6.3016 10.9540 15.0250 10.7620
## 25 0.203670 2.48120 11.1230 18.4090 11.9000 6.6108 11.4290 15.6730 11.2260
##       V10     V11      V12      V13     V14    V15     V16      V17      V18
## 1  3.3217 0.63098 0.081912 0.076605 0.15584 0.2000 0.15576 0.073576 0.021080
## 2  3.1288 0.59813 0.099451 0.150000 0.31159 0.4000 0.31152 0.147150 0.042160
## 3  2.9359 0.56529 0.116990 0.223400 0.46735 0.6000 0.46728 0.220730 0.063240
## 4  2.7430 0.53244 0.134530 0.296800 0.62310 0.8000 0.62304 0.294300 0.084319
## 5  2.5500 0.49959 0.152070 0.370200 0.77886 1.0000 0.77880 0.367880 0.105400
## 6  2.3571 0.46674 0.169610 0.443600 0.93462 1.2000 0.93456 0.441460 0.126480
## 7  2.1642 0.43390 0.187150 0.517000 1.09040 1.4000 1.09030 0.515030 0.147560
## 8  1.9713 0.40105 0.204690 0.590400 1.24610 1.6000 1.24610 0.588610 0.168640
## 9  1.7784 0.36820 0.222230 0.663800 1.40190 1.8000 1.40180 0.662180 0.189720
## 10 1.5854 0.33535 0.239770 0.737200 1.55760 2.0000 1.55760 0.735760 0.210800
## 11 1.7517 0.44215 0.685340 2.282400 4.82860 6.2000 4.82860 2.280900 0.653480
## 12 1.9220 0.47021 0.664380 2.198500 4.65060 5.9714 4.65060 2.196800 0.629380
## 13 2.0922 0.49826 0.643410 2.114600 4.47260 5.7429 4.47250 2.112700 0.605290
## 14 2.2625 0.52632 0.622450 2.030600 4.29460 5.5143 4.29450 2.028600 0.581200
## 15 2.4328 0.55438 0.601480 1.946700 4.11660 5.2857 4.11650 1.944500 0.557110
## 16 2.6031 0.58243 0.580520 1.862800 3.93860 5.0571 3.93850 1.860400 0.533020
## 17 2.7733 0.61049 0.559550 1.778900 3.76060 4.8286 3.76050 1.776300 0.508930
## 18 2.9436 0.63855 0.538590 1.694900 3.58260 4.6000 3.58250 1.692200 0.484840
## 19 3.1139 0.66660 0.517620 1.611000 3.40450 4.3714 3.40450 1.608200 0.460750
## 20 3.2841 0.69466 0.496660 1.527100 3.22650 4.1429 3.22650 1.524100 0.436650
## 21 3.4544 0.72272 0.475690 1.443100 3.04850 3.9143 3.04840 1.440000 0.412560
## 22 3.6247 0.75077 0.454730 1.359200 2.87050 3.6857 2.87040 1.355900 0.388470
## 23 3.7949 0.77883 0.433760 1.275300 2.69250 3.4571 2.69240 1.271800 0.364380
## 24 3.9652 0.80689 0.412800 1.191300 2.51450 3.2286 2.51440 1.187700 0.340290
## 25 4.1355 0.83494 0.391840 1.107400 2.33650 3.0000 2.33640 1.103600 0.316200
##          V19        V20
## 1  0.0036631 0.00038609
## 2  0.0073263 0.00077218
## 3  0.0109890 0.00115830
## 4  0.0146530 0.00154440
## 5  0.0183160 0.00193050
## 6  0.0219790 0.00231650
## 7  0.0256420 0.00270260
## 8  0.0293050 0.00308870
## 9  0.0329680 0.00347480
## 10 0.0366310 0.00386090
## 11 0.1135600 0.01196900
## 12 0.1093700 0.01152800
## 13 0.1051800 0.01108600
## 14 0.1010000 0.01064500
## 15 0.0968110 0.01020400
## 16 0.0926250 0.00976260
## 17 0.0884380 0.00932130
## 18 0.0842520 0.00888010
## 19 0.0800660 0.00843880
## 20 0.0758790 0.00799760
## 21 0.0716930 0.00755630
## 22 0.0675060 0.00711510
## 23 0.0633200 0.00667390
## 24 0.0591330 0.00623260
## 25 0.0549470 0.00579140

Next, we will set the parameters to be used by CoGAPS. First, we will create a CogapsParams object, then set parameters with the setParam function.

# create new parameters object
params <- new("CogapsParams")

# view all parameters
params
## -- Standard Parameters --
## nPatterns            7 
## nIterations          50000 
## seed                 89 
## sparseOptimization   FALSE 
## 
## -- Sparsity Parameters --
## alpha          0.01 
## maxGibbsMass   100
# get the value for a specific parameter
getParam(params, "nPatterns")
## [1] 7
# set the value for a specific parameter
params <- setParam(params, "nPatterns", 3)
getParam(params, "nPatterns")
## [1] 3

Run CoGAPS on the ModSim data.

Since this is a small dataset, the expected runtime is only about 5-10 seconds.

The only required argument to CoGAPS is the data set. This can be a matrix, data.frame, SummarizedExperiment, SingleCellExperiment or the path of a file (tsv, csv, mtx, gct) containing the data.

# run CoGAPS with specified parameters
cogapsresult <- CoGAPS(modsimdata, params, outputFrequency = 10000)
## 
## This is CoGAPS version 3.20.0 
## Running Standard CoGAPS on modsimdata (25 genes and 20 samples) with parameters:
## 
## -- Standard Parameters --
## nPatterns            3 
## nIterations          50000 
## seed                 89 
## sparseOptimization   FALSE 
## 
## -- Sparsity Parameters --
## alpha          0.01 
## maxGibbsMass   100
cogapsresult
## [1] "CogapsResult object with 25 features and 20 samples"
## [1] "3 patterns were learned"

Verify that this output appears:

This is CoGAPS version 3.19.1 

Running Standard CoGAPS on modsimdata (25 genes and 20 samples) with parameters:

-- Standard Parameters --

nPatterns            3 

nIterations          50000 

seed                 622 

sparseOptimization   FALSE 

-- Sparsity Parameters --

alpha          0.01 

maxGibbsMass   100 

Data Model: Dense, Normal

Sampler Type: Sequential

Loading Data...Done! (00:00:00)

-- Equilibration Phase --

10000 of 50000, Atoms: 59(A), 49(P), ChiSq: 245, Time: 00:00:00 / 00:00:00

20000 of 50000, Atoms: 68(A), 46(P), ChiSq: 188, Time: 00:00:00 / 00:00:00

30000 of 50000, Atoms: 80(A), 47(P), ChiSq: 134, Time: 00:00:00 / 00:00:00

40000 of 50000, Atoms: 69(A), 46(P), ChiSq: 101, Time: 00:00:00 / 00:00:00

50000 of 50000, Atoms: 76(A), 53(P), ChiSq: 132, Time: 00:00:00 / 00:00:00

-- Sampling Phase --

10000 of 50000, Atoms: 82(A), 52(P), ChiSq: 94, Time: 00:00:00 / 00:00:00

20000 of 50000, Atoms: 74(A), 54(P), ChiSq: 144, Time: 00:00:01 / 00:00:01

30000 of 50000, Atoms: 79(A), 47(P), ChiSq: 116, Time: 00:00:01 / 00:00:01

40000 of 50000, Atoms: 79(A), 46(P), ChiSq: 132, Time: 00:00:01 / 00:00:01

50000 of 50000, Atoms: 76(A), 48(P), ChiSq: 124, Time: 00:00:01 / 00:00:01

This means that the underlying C++ library has run correctly, and everything is installed how it should be.

We now examine the result object.

4.1 Analyzing the Toy Data CoGAPS result

CoGAPS returns a object of the class CogapsResult which inherits from LinearEmbeddingMatrix (defined in the SingleCellExperiment package). CoGAPS stores the lower dimensional representation of the samples (P matrix) in the sampleFactors slot and the weight of the features (A matrix) in the featureLoadings slot. CogapsResult also adds two of its own slots - factorStdDev and loadingStdDev which contain the standard deviation across sample points for each matrix.

There is also some information in the metadata slot such as the original parameters and value for the Chi-Sq statistic. In general, the metadata will vary depending on how CoGAPS was called in the first place. The package provides these functions for querying the metadata in a safe manner:

cogapsresult
## [1] "CogapsResult object with 25 features and 20 samples"
## [1] "3 patterns were learned"
cogapsresult@sampleFactors
##        Pattern_1    Pattern_2    Pattern_3
## V1  0.0057629701 0.0006370120 0.0086620962
## V2  0.1356537938 0.0007903848 0.0899095386
## V3  0.6105729938 0.0026488178 0.4020447731
## V4  0.9999979734 0.0039550560 0.6675578952
## V5  0.6090636849 0.0019203566 0.4530397356
## V6  0.1356322914 0.0013074697 0.3548480868
## V7  0.0059427838 0.0032057697 0.7268303037
## V8  0.0060635870 0.0036284865 1.0000000000
## V9  0.0045336499 0.0022866314 0.7167789340
## V10 0.0013264725 0.0008439139 0.2644294798
## V11 0.0004282084 0.0060867304 0.0534428321
## V12 0.0011535183 0.1129870117 0.0015432438
## V13 0.0005422591 0.3694829643 0.0002787601
## V14 0.0010983978 0.7799351811 0.0005588869
## V15 0.0016168046 1.0000000000 0.0007948451
## V16 0.0011570539 0.7798293829 0.0005688610
## V17 0.0007260545 0.3684066832 0.0003091003
## V18 0.0008248215 0.1050761417 0.0001687787
## V19 0.0007886651 0.0142464219 0.0008717210
## V20 0.0001865384 0.0002302350 0.0000643042
cogapsresult@featureLoadings
##           Pattern_1 Pattern_2 Pattern_3
## Gene_1  0.003405583 0.1650319 11.491705
## Gene_2  0.010983311 0.3915269 11.412056
## Gene_3  0.115412243 0.5920523 11.185597
## Gene_4  0.840506494 0.7922471 10.497052
## Gene_5  1.939326048 0.9900553  9.612582
## Gene_6  2.730523109 1.1886208  8.903272
## Gene_7  3.527511835 1.3869375  8.175836
## Gene_8  4.319871426 1.5863253  7.462584
## Gene_9  5.122595787 1.7840303  6.732052
## Gene_10 5.943236351 1.9825239  5.995112
## Gene_11 0.004520061 6.1508226  6.321143
## Gene_12 0.049791694 5.9297895  7.330933
## Gene_13 0.401395082 5.6987758  8.108047
## Gene_14 1.245348573 5.4742627  8.609726
## Gene_15 1.909329891 5.2508001  9.222692
## Gene_16 2.532825470 5.0229015  9.844507
## Gene_17 3.122108221 4.7953830 10.490115
## Gene_18 3.705909967 4.5711322 11.137412
## Gene_19 4.298285484 4.3430972 11.783696
## Gene_20 4.873663902 4.1145954 12.424563
## Gene_21 5.462013245 3.8878591 13.067101
## Gene_22 6.039046288 3.6592815 13.711915
## Gene_23 6.618192673 3.4314625 14.353992
## Gene_24 7.197600842 3.2045474 14.990470
## Gene_25 7.781903267 2.9735296 15.621151
# check reference result:
modsimresult <- readRDS("../data/ModSimResult.Rds")

If both matrices–sampleFactors and featureLoadings–have reasonable values (small, nonnegative, somewhat random-seeming), it is an indication that CoGAPS is working as expected.

We now continue with single-cell analysis.

5 Single-cell CoGAPS

# OPTION: download data object from Zenodo
options(timeout=1000) # adjust this if you're getting timeout downloading the file
url = "https://zenodo.org/record/7709664/files/inputdata.Rds?download=1"
download.file(url,"inputdata_download.Rds")
pdac_data <- readRDS("inputdata_download.Rds")
## The legacy packages maptools, rgdal, and rgeos, underpinning the sp package,
## which was just loaded, will retire in October 2023.
## Please refer to R-spatial evolution reports for details, especially
## https://r-spatial.org/r/2023/05/15/evolution4.html.
## It may be desirable to make the sf package available;
## package maintainers should consider adding sf to Suggests:.
## The sp package is now running under evolution status 2
##      (status 2 uses the sf package in place of rgdal)
# OPTION: read data object in from file
# This file is hosted on our github repository and will be included with any github CoGAPS install,
# or can be downloaded from: https://github.com/FertigLab/CoGAPS/blob/b6b849cf84ed91f34038048e2b29ea0fcf93570b/data/inputdata.Rds
pdac_data <- readRDS("../data/inputdata.Rds") # load R data object 
pdac_data

pdac_data An object of class Seurat 15184 features across 25442 samples within 2 assays Active assay: originalexp (15176 features, 2000 variable features) 1 other assay present: CoGAPS 5 dimensional reductions calculated: PCA, Aligned, UMAP, pca, umap

We also want to extract the counts matrix to provide directly to CoGAPS

pdac_epi_counts <- as.matrix(pdac_data@assays$originalexp@counts)
norm_pdac_epi_counts <- log1p(pdac_epi_counts)

head(pdac_epi_counts, n=c(5L, 2L))
head(norm_pdac_epi_counts, n=c(5L, 2L))

Most of the time we will set some parameters before running CoGAPS. Parameters are managed with a CogapsParams object. This object will store all parameters needed to run CoGAPS and provides a simple interface for viewing and setting the parameter values.

library(CoGAPS)
pdac_params <- CogapsParams(nIterations=50000, # 50000 iterations 
                seed=42, # for consistency across stochastic runs
                nPatterns=8, # each thread will learn 8 patterns
                  sparseOptimization=TRUE, # optimize for sparse data
                  distributed="genome-wide") # parallelize across sets
pdac_params
## -- Standard Parameters --
## nPatterns            8 
## nIterations          50000 
## seed                 42 
## sparseOptimization   TRUE 
## distributed          genome-wide 
## 
## -- Sparsity Parameters --
## alpha          0.01 
## maxGibbsMass   100 
## 
## -- Distributed CoGAPS Parameters -- 
## nSets          4 
## cut            7 
## minNS          2 
## maxNS          6

If you wish to run distributed CoGAPS, which is recommended to improve the computational efficiency for most large datasets, you must also call the setDistributedParams function. For a complete description of the parallelization strategy used in distributed CoGAPS, please refer to our preprint: https://www.biorxiv.org/content/10.1101/2022.07.09.499398v1

pdac_params <- setDistributedParams(pdac_params, nSets=7)
## setting distributed parameters - call this again if you change nPatterns
pdac_params
## -- Standard Parameters --
## nPatterns            8 
## nIterations          50000 
## seed                 42 
## sparseOptimization   TRUE 
## distributed          genome-wide 
## 
## -- Sparsity Parameters --
## alpha          0.01 
## maxGibbsMass   100 
## 
## -- Distributed CoGAPS Parameters -- 
## nSets          7 
## cut            8 
## minNS          4 
## maxNS          11

With all parameters set, we are now ready to run CoGAPS. Please note that this is the most time-consuming step of the procedure. Timing can take several hours and scales nlog(n) based on dataset size, as well as the parameter values set for ‘nPatterns’ and ‘nIterations’. Time is increased when learning more patterns, when running more iterations, and when running a larger dataset, with iterations having the largest variable impact on the runtime of the NMF function.

startTime <- Sys.time()
  
pdac_epi_result <- CoGAPS(pdac_epi_counts, pdac_params)
endTime <- Sys.time()

saveRDS(pdac_epi_result, "../data/pdac_epi_cogaps_result.Rds")

# To save as a .csv file, use the following line:
toCSV(pdac_epi_result, "../data")

6 Analyzing the CoGAPS result

Now that the CoGAPS run is complete, learned patterns can be investigated. Due to the stochastic nature of the MCMC sampling in CoGAPS and long run time, it is generally a good idea to immediately save your CoGAPS result object to a file to have (Box 17), then read it in for downstream analysis.

If you wish to load and examine a precomputed result object, please do so by:

library(CoGAPS)
cogapsresult <- readRDS("../data/cogapsresult.Rds")
# OPTION: download precomputed CoGAPS result object from Zenodo
# Bioc vignette uses this
options(timeout=1000) # adjust this if you're getting timeout downloading the file
url = "https://zenodo.org/record/7709664/files/cogapsresult.Rds?download=1"
download.file(url,"cogapsresult_download.Rds")
cogapsresult <- readRDS("cogapsresult_download.Rds")

To load your own result, simply edit the file path:

library(CoGAPS)
cogapsresult <- readRDS("../data/pdac_epi_cogaps_result.Rds")

It is recommended to immediately visualize pattern weights on a UMAP because you will immediately see whether they are showing strong signal and make common sense.

Since pattern weights are all continuous and nonnegative, they can be used to color a UMAP in the same way as one would color by gene expression. The sampleFactors matrix is essentially just nPatterns different annotations for each cell, and featureLoadings is likewise just nPatterns annotations for each gene. This makes it very simple to incorporate pattern data into any data structure and workflow.

6.1 Load CoGAPS pattern information into Seurat object

To store CoGAPS patterns as an Assay within a Seurat object (recommended):

library(Seurat)
# make sure pattern matrix is in same order as the input data
patterns_in_order <-t(cogapsresult@sampleFactors[colnames(pdac_data),])

# add CoGAPS patterns as an assay
pdac_data[["CoGAPS"]] <- CreateAssayObject(counts = patterns_in_order)

6.2 Plot patterns on an embedding

With the help of Seurat’s FeaturePlot function, we generate a UMAP embedding of the cells colored by the intensity of each pattern.

DefaultAssay(pdac_data) <- "CoGAPS"
pattern_names = rownames(pdac_data@assays$CoGAPS)

library(viridis)
color_palette <- viridis(n=10)

FeaturePlot(pdac_data, pattern_names, cols=color_palette, reduction = "umap") & NoLegend()

7 Pattern Markers

To assess pattern marker genes, we provide a patternMarkers() CoGAPS function to find genes associated with each pattern and returns a dictionary of information containing lists of marker genes, their ranking, and their “score” for each pattern. This is vital because genes are often associated with multiple patterns.

patternMarkers can run in two modes, depending on the “threshold” parameter

If threshold=“all”, each gene is treated as a marker of one pattern (whichever it is most strongly associated with). The number of marker genes will always equal the number of input genes. If threshold=“cut”, a gene is considered a marker of a pattern if and only if it is less significant to at least one other pattern. Counterintuitively, this results in much shorter lists of patternMarkers and is a more convenient statistic to use when functionally annotating patterns.

The three components of the returned dictionary pm are:

PatternMarkers:

PatternMarkerRank:

PatternMarkerScores:

pm <- patternMarkers(cogapsresult, threshold="cut")
## Warning in sweep(As, 2, pscale, FUN = "*"): STATS is longer than the extent of
## 'dim(x)[MARGIN]'

8 Pattern GSEA

One way to explore and use CoGAPS patterns is to conduct gene set enrichment analysis by functionally annotating the genes which are significant for each pattern. The getPatternHallmarks function provides a wrapper around the fgsea fora method and associates each pattern with msigDB hallmark pathway annotations using the list of marker genes attained from the patternMarkers statistic.

To perform gene set analysis on pattern markers, please run:

hallmarks <- getPatternHallmarks(cogapsresult)
## Warning in sweep(As, 2, pscale, FUN = "*"): STATS is longer than the extent of
## 'dim(x)[MARGIN]'

hallmarks is a list of data frames, each containing hallmark overrepresentation statistics corresponding to one pattern.

To generate a barchart of the most significant hallmarks for any given pattern, please run:

pl_pattern7 <- plotPatternHallmarks(cogapsresult, hallmarks, whichpattern = 7)

pl_pattern7

To generate statistics on the association between certain sample groups and patterns, we provide a wrapper function, called MANOVA.This will allow us to explore if the patterns we have discovered lend to statistically significant differences in the sample groups. We will first load in the original data (if not already done earlier):

pdac_data <- readRDS("../data/inputdata.Rds")

Then, create a new matrix called “interestedVariables” consisting of the metadata variables of interest in conducting analysis on. Lastly, call the wrapper function, passing in the result object as well.

# create dataframe of interested variables 
interestedVariables <- cbind(pdac_data@meta.data[["nCount_RNA"]], pdac_data@meta.data[["nFeature_RNA"]])
# call cogaps manova wrapper
manova_results <- MANOVA(interestedVariables, cogapsresult)
## [1] "Pattern_1"
##                   Df  Pillai approx F num Df den Df    Pr(>F)    
## pattern_column     1 0.46053    10858      2  25439 < 2.2e-16 ***
## Residuals      25440                                             
## ---
## Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
## [1] "Pattern_2"
##                   Df  Pillai approx F num Df den Df    Pr(>F)    
## pattern_column     1 0.14815   2212.2      2  25439 < 2.2e-16 ***
## Residuals      25440                                             
## ---
## Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
## [1] "Pattern_3"
##                   Df  Pillai approx F num Df den Df    Pr(>F)    
## pattern_column     1 0.46173    10911      2  25439 < 2.2e-16 ***
## Residuals      25440                                             
## ---
## Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
## [1] "Pattern_4"
##                   Df  Pillai approx F num Df den Df    Pr(>F)    
## pattern_column     1 0.31354   5809.5      2  25439 < 2.2e-16 ***
## Residuals      25440                                             
## ---
## Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
## [1] "Pattern_5"
##                   Df  Pillai approx F num Df den Df    Pr(>F)    
## pattern_column     1 0.16056   2432.8      2  25439 < 2.2e-16 ***
## Residuals      25440                                             
## ---
## Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
## [1] "Pattern_6"
##                   Df  Pillai approx F num Df den Df    Pr(>F)    
## pattern_column     1 0.19702   3120.9      2  25439 < 2.2e-16 ***
## Residuals      25440                                             
## ---
## Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
## [1] "Pattern_7"
##                   Df  Pillai approx F num Df den Df    Pr(>F)    
## pattern_column     1 0.18574   2901.5      2  25439 < 2.2e-16 ***
## Residuals      25440                                             
## ---
## Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
## [1] "Pattern_8"
##                   Df  Pillai approx F num Df den Df    Pr(>F)    
## pattern_column     1 0.11419   1639.7      2  25439 < 2.2e-16 ***
## Residuals      25440                                             
## ---
## Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1

The function will print out the MANOVA results for each pattern learned based on the variables of interest. From the output, we can observe that all p-values have a value of 0.0, indicating that differences observed in the sample groups based on the patterns are statistically significant.

9 Citing CoGAPS

If you use the CoGAPS package for your analysis, please cite Fertig et al. (2010)

If you use the gene set statistic, please cite Ochs et al. (2009)

References

Fertig, Elana J., Jie Ding, Alexander V. Favorov, Giovanni Parmigiani, and Michael F. Ochs. 2010. “CoGAPS: An R/C++ Package to Identify Patterns and Biological Process Activity in Transcriptomic Data.” Bioinformatics 26 (21): 2792–3. https://doi.org/10.1093/bioinformatics/btq503.

Ochs, Michael F., Lori Rink, Chi Tarn, Sarah Mburu, Takahiro Taguchi, Burton Eisenberg, and Andrew K. Godwin. 2009. “Detection of Treatment-Induced Changes in Signaling Pathways in Gastrointestinal Stromal Tumors Using Transcriptomic Data.” Cancer Research 69 (23): 9125–32. https://doi.org/10.1158/0008-5472.CAN-09-1709.

Seung, Sebastian, and Daniel D. Lee. 1999. “Learning the Parts of Objects by Non-Negative Matrix Factorization.” Nature 401 (6755): 788–91. https://doi.org/10.1038/44565.