Contents

1 Introduction and overview

The recountmethylation package provides access to databases of DNA methylation (DNAm) data from over 62,000 cumulative sample records with IDATs in the Gene Expression Omnibus (GEO, available by November, 2020). Samples were run using either of 2 Illumina BeadArray platform types, either the older HM450K platform or the newer EPIC/HM850K platform. The database compilation files include mined, mapped, and model-based sample metadata, and DNAm data in the form of either raw/unnormalized red and green signals, raw/unnormalized methylated and unmethylated signals, or normalized DNAm fractions (a.k.a. “Beta-values”) [1]. Normalization was performed using the out-of-band signal correction (a.k.a. “noob”) method, a type of within-sample normalization [2].

This User’s Guide shows how to use the recountmethylation package to obtain, load, and query the DNAm databases with 2 small example files. Background about DNAm arrays, DNAm measurement, SummarizedExperiment objects, database file types, and samples metadata is also provided. Further analysis examples are contained in the data_analyses vignette.

1.1 Disclaimer

Databases accessed with recountmethylation contain data from GEO (ncbi.nlm.nih.gov/geo/), a live public database where alterations to online records can cause discrepancies with stored data over time. We cannot guarantee the accuracy of stored data, and advise users cross-check their findings with latest available records.

1.2 Database files and access

Database compilation file download and access is managed by the get_db functions, where the DNAm array platform type using the platform argument (see ?get_db for details). Both HM450K and EPIC/HM850K platforms are currently supported (see below for platform details). Note you will need between 50-180 Gb of disk space to store a single database file. Files pair sample metadata and assay data in various formats, including HDF5-SummarizedExperiment database directories, and HDF5 database files with the .h5 extension.

The databases are located at https://methylation.recount.bio/, and file details are viewable as follows:

sm <- as.data.frame(smfilt(get_servermatrix()))
if(is(sm, "data.frame")){knitr::kable(sm, align = "c")}
filename date time size (bytes)
remethdb_h5-rg_epic_0-0-2_1589820348.h5 08-Jan-2021 09:46 66751358297
remethdb_h5se-gm_epic_0-0-2_1589820348 06-Jan-2021 09:56 assays.h5 = 56956363488;se.rds = 8475111
remethdb_h5se-gr_epic_0-0-2_1607018051 06-Jan-2021 10:09 assays.h5 = 82090895411;se.rds = 8475201
remethdb_h5se-rg_epic_0-0-2_1589820348 06-Jan-2021 10:19 assays.h5 = 68707689800;se.rds = 3059883
remethdb_h5-rg_hm450k_0-0-2_1607018051.h5 07-Jan-2021 10:01 193342823766
remethdb_h5se-gm_hm450k_0-0-2_1607018051 07-Jan-2021 10:23 assays.h5 = 130935841655;se.rds = 5372091
remethdb_h5se-gr_hm450k_0-0-2_1607018051 07-Jan-2021 10:50 assays.h5 = 184355830172;se.rds = 5372008
remethdb_h5se-rg_hm450k_0-0-2_1607018051 06-Jan-2021 10:44 assays.h5 = 164788908310;se.rds = 3179962
remethdb-h5se_gr-test_0-0-1_1590090412 29-May-2020 07:28 assays.h5 = 132596;se.rds = 68522
remethdb-h5_rg-test_0-0-1_1590090412.h5 31-May-2020 07:26 252757

1.3 ExperimentHub integration

The DNAm array database files are indexed on ExperimentHub, and are viewable as follows. Note, the cache needs to be set with R_user_dir() per instructions here.

cache.path <- tools::R_user_dir("recountmethylation")
setExperimentHubOption("CACHE", cache.path)
hub <- ExperimentHub::ExperimentHub()                    # connect to the hubs
rmdat <- AnnotationHub::query(hub, "recountmethylation") # query the hubs

In addition to using the getdb functions, the HDF5 (“.h5”" extension) files may be downloaded from the hubs.

fpath <- rmdat[["EH3778"]] # download with default caching
rhdf5::h5ls(fpath)         # load the h5 file

Note that whether downloads use the hubs or getdb functions, caching is implemented to check for previously downloaded database files.

2 Background

This section includes essential background about DNAm array platforms, assays and file types, and sample metadata.

2.1 DNAm arrays

Databases include human samples run on the Illumina Infinium HM450K BeadArray platform. HM450K is a popular 2-channel platform that probes over 480,000 CpG loci genome-wide, with enriched coverage at CG islands, genes, and enhancers [3]. The more recently released EPIC/HM850K platform contains an expanded probe set targeting over 850,000 CpGs, including more than 90% of the HM450K probes, with greater coverage of potential intergenic regulatory regions [4].

Array processing generates 2 intensity files (IDATs) per sample, one each for the red and green color channels. These raw files also contain control signals useful for quality evaluations [5]. The BeadArray probes use either of 2 bead technologies, known as Type I and Type II, where the majority (72%) of probes use the latter. For Type II probes, a single bead assay informs a single probe, while Type I probes use 2 beads each. Practically, this means the bead-specific matrices found in RGChannelSet objects are larger than the probe-specific matrices found in derived object types (e.g. for HM450K samples, 622,399 assays for red/green signal matrices versus 485,512 assays for methylated/unmethylated signal, DNAm fractions matrices, see below).

2.2 SummarizedExperiment object classes

DNAm array sample IDATs can be read into an R session as an object of class RGChannelSet, a type of SummarizedExperiment. These objects support analyses of high-throughput genomics datasets, and they include slots for assay matrices, sample metadata, and experiment metadata. During a typical workflow, normalization and preprocessing convert RGChannelSet objects into new types like MethylSet and RatioSet. While not all IDAT information is accessible from every object type (e.g. only RGChannelSets can contain control assays), derived objects like MethylSets and RatioSets may be smaller and/or faster to access.

Three SummarizedExperiment databases are provided as HDF5-SummarizedExperiment files, including an unnormalized RGChannelSet (red/green signals), an unnormalized MethylSet (methylated/unmethylated signals) and a normalized GenomicRatioSet (DNAm fractions). For the latter, DNAm fractions (logit2 Beta-values, or M-values) were normalized using the out-of-band signal or “noob” method, an effective within-sample normalization that removes signal artifacts [2].

2.3 Database file types

Database files are stored as either HDF5 or HDF5-SummarizedExperiment. For most R users, the latter files will be most convenient to work with. HDF5, or hierarchical data format 5, combines compression and chunking for convenient handling of large datasets. HDF5-SummarizedExperiment files combine the benefits of HDF5 and SummarizedExperiment entities using a DelayedArray-powered backend. Once an HDF5-SummarizedExperiment file is loaded, it can be treated similarly to a SummarizedExperiment object in active memory. That is, summary and subset operations execute rapidly, and realization of large data chunks in active memory is delayed until called for by the script (see examples).

2.4 Sample metadata

Sample metadata are included with DNAm assays in the database files. Currently, metadata variables include GEO record IDs for samples (GSM) and studies (GSE), sample record titles, learned labels for tissue and disease, sample type predictions from the MetaSRA-pipeline, and DNAm model-based predictions for age, sex, and blood cell types. Access sample metadata from SummarizedExperiment objects using the pData minfi function (see examples). Examples in the data_analyses vignette illustrate some ways to utilize the provided sample metadata.

Provided metadata derives from the GSE-specific SOFT files, which contain experiment, sample, and platform metadata. Considerable efforts were made to learn, harmonize, and predict metadata labels. Certain types of info lacking in the recountmethylation metadata may be available in the SOFT files, especially if it is sample non-specific (e.g. methods text, PubMed ID, etc.) or redundant with DNAm-derived metrics (e.g. DNAm summaries, predicted sex, etc.).

It is good practice to validate the harmonized metadata with original metadata records, especially where labels are ambiguous or there is insufficient information for a given query. GEO GSM and GSE records can be viewed from a browser, or SOFT files may be downloaded directly. Packages like GEOmetadb and GEOquery are also useful to query and summarize GEO metadata.

3 HDF5-SummarizedExperiment example

This example shows basic handling for HDF5-SummarizedExperiment (a.k.a. “h5se”) files. For these files, the getdb function returns the loaded file. Thanks to a DelayedArray backend, even full-sized h5se databases can be treated as if they were fully loaded into active memory.

3.1 Obtain the test database

The test h5se dataset includes sample metadata and noob-normalized DNAm fractions (Beta-values) for chromosome 22 probes for 2 samples. Datasets can be downloaded using the getdb series of functions (see ?getdb for details), where the dfp argument specifies the download destination. The test h5se file is included in the package “inst” directory, and can be loaded as follows.

dn <- "remethdb-h5se_gr-test_0-0-1_1590090412"
path <- system.file("extdata", dn, package = "recountmethylation")
h5se.test <- HDF5Array::loadHDF5SummarizedExperiment(path)

3.2 Inspect and summarize the database

Common characterization functions can be used on the dataset after it has been loaded. These include functions for SummarizedExperiment-like objects, such as the getBeta, pData, and getAnnotation minfi functions. First, inspect the dataset using standard functions like class, dim, and summary as follows.

class(h5se.test) # inspect object class
## [1] "GenomicRatioSet"
## attr(,"package")
## [1] "minfi"
dim(h5se.test) # get object dimensions
## [1] 8552    2
summary(h5se.test) # summarize dataset components
## [1] "GenomicRatioSet object of length 8552 with 0 metadata columns"

Access the sample metadata for the 2 available samples using pData.

h5se.md <- minfi::pData(h5se.test) # get sample metadata
dim(h5se.md)                       # get metadata dimensions
## [1]  2 19
colnames(h5se.md) # get metadata column names
##  [1] "gsm"            "gsm_title"      "gseid"          "disease"       
##  [5] "tissue"         "sampletype"     "arrayid_full"   "basename"      
##  [9] "age"            "predage"        "sex"            "predsex"       
## [13] "predcell.CD8T"  "predcell.CD4T"  "predcell.NK"    "predcell.Bcell"
## [17] "predcell.Mono"  "predcell.Gran"  "storage"

Next get CpG probe-specific DNAm fractions, or “Beta-values”, with getBeta (rows are probes, columns are samples).

h5se.bm <- minfi::getBeta(h5se.test) # get dnam fractions
dim(h5se.bm)                         # get dnam fraction dimensions
## [1] 8552    2
colnames(h5se.bm) <- h5se.test$gsm       # assign sample ids to dnam fractions
knitr::kable(head(h5se.bm), align = "c") # show table of dnam fractions 
GSM1038308 GSM1038309
cg00017461 0.9807283 0.9746836
cg00077299 0.3476970 0.3456837
cg00079563 0.8744652 0.9168005
cg00087182 0.9763206 0.9760947
cg00093544 0.0225112 0.0265087
cg00101350 0.9736359 0.9789818

Access manifest information for probes with getAnnotation. This includes the bead addresses, probe type, and genome coordinates and regions. For full details about the probe annotations, consult the minfi and Illumina platform documentation.

an <- minfi::getAnnotation(h5se.test) # get platform annotation
dim(an)                               # get annotation dimensions
## [1] 8552   33
colnames(an) # get annotation column names
##  [1] "chr"                      "pos"                     
##  [3] "strand"                   "Name"                    
##  [5] "AddressA"                 "AddressB"                
##  [7] "ProbeSeqA"                "ProbeSeqB"               
##  [9] "Type"                     "NextBase"                
## [11] "Color"                    "Probe_rs"                
## [13] "Probe_maf"                "CpG_rs"                  
## [15] "CpG_maf"                  "SBE_rs"                  
## [17] "SBE_maf"                  "Islands_Name"            
## [19] "Relation_to_Island"       "Forward_Sequence"        
## [21] "SourceSeq"                "Random_Loci"             
## [23] "Methyl27_Loci"            "UCSC_RefGene_Name"       
## [25] "UCSC_RefGene_Accession"   "UCSC_RefGene_Group"      
## [27] "Phantom"                  "DMR"                     
## [29] "Enhancer"                 "HMM_Island"              
## [31] "Regulatory_Feature_Name"  "Regulatory_Feature_Group"
## [33] "DHS"
ant <- as.matrix(t(an[c(1:4), c(1:3, 5:6, 9, 19, 24, 26)])) # subset annotation
knitr::kable(ant, align = "c")                              # show annotation table
cg00017461 cg00077299 cg00079563 cg00087182
chr chr22 chr22 chr22 chr22
pos 30663316 18632618 43253521 24302043
strand - + + +
AddressA 31616369 13618325 65630302 37797387
AddressB 70798487 37626331 55610348 20767312
Type I I I I
Relation_to_Island OpenSea N_Shore Island N_Shore
UCSC_RefGene_Name OSM USP18 ARFGAP3;ARFGAP3 GSTT2B;GSTT2
UCSC_RefGene_Group TSS1500 TSS200 TSS200;TSS200 Body;Body

4 HDF5 database and example

To provide more workflow options, bead-specific red and green signal data have been provided with sample metadata in an HDF5/h5 file. This example shows how to handle objects of this type with recountmethylation.

4.1 Obtain the test database

The test h5 file includes metadata and bead-specific signals from chromosome 22 for the same 2 samples as in the h5se test file. Note getdb functions for h5 files simply return the database path. Since the test h5 file has also been included in the package “inst” folder, get the path to load the file as follows.

dn <- "remethdb-h5_rg-test_0-0-1_1590090412.h5"     # get the h5se directory name
h5.test <- system.file("extdata", "h5test", dn, 
                    package = "recountmethylation") # get the h5se dir path

4.2 Inspect and summarize the database

Use the file path to read data into an RGChannelSet with the getrg function. Setting all.gsm = TRUE obtains data for all samples in the database files, while passing a vector of GSM IDs to gsmv argument will query a subset of available samples. Signals from all available probes are retrieved by default, and probe subsets can be obtained by passing a vector of valid bead addresses to the cgv argument.

h5.rg <- getrg(dbn = h5.test, all.gsm = TRUE) # get red/grn signals from an h5 db

To avoid exhausting active memory with the full-sized h5 dataset, provide either gsmv or cgv to getrg, and set either all.cg or all.gsm to FALSE (see ?getrg for details).

As in the previous example, use pData and getAnnotation to get sample metadata and array manifest information, respectively. Access the green and red signal matrices in the RGChannelSet with the getRed and getGreen minfi functions.

h5.red <- minfi::getRed(h5.rg)     # get red signal matrix
h5.green <- minfi::getGreen(h5.rg) # get grn signal matrix
dim(h5.red)                        # get dimensions of red signal matrix
## [1] 11162     2
knitr::kable(head(h5.red), align = "c") # show first rows of red signal matrix
GSM1038308 GSM1038309
10601475 1234 1603
10603366 342 344
10603418 768 963
10605304 2368 2407
10605460 3003 3322
10608343 357 399
knitr::kable(head(h5.green), align = "c") # show first rows of grn signal matrix
GSM1038308 GSM1038309
10601475 6732 8119
10603366 288 356
10603418 267 452
10605304 4136 4395
10605460 1395 1762
10608343 840 1269
identical(rownames(h5.red), rownames(h5.green)) # check cpg probe names identical
## [1] TRUE

Rows in these signal matrices map to bead addresses rather than probe IDs. These matrices have more rows than the h5se test Beta-value matrix because any type I probes use data from 2 beads each.

5 Validate DNAm datasets

This section demonstrates validation using the test databases. Full code to reproduce this section is provided but not evaluated, as it involves a download from the GEO servers. As the disclaimer notes, it is good practice to validate data against the latest available GEO files. This step may be most useful for newer samples published close to the end compilation date (through November 7, 2020 for current version), which may be more prone to revisions at initial publication.

5.1 Download and read IDATs from the GEO database server

Use the gds_idat2rg function to download IDATs for the 2 test samples and load these into a new RGChannelSet object. Do this by passing a vector of GSM IDs to gsmv and the download destination to dfp. (note, chunks in this section are fully executable, but not evaluated for this vignette).

# download from GEO
dlpath <- tempdir()                                     # get a temp dir path
gsmv <- c("GSM1038308", "GSM1038309")                   # set sample ids to identify
geo.rg <- gds_idat2rg(gsmv, dfp = dlpath)               # load sample idats into rgset
colnames(geo.rg) <- gsub("\\_.*", "", colnames(geo.rg)) # assign sample ids to columns

5.2 Compare DNAm signals

Extract the red and green signal matrices from geo.rg.

geo.red <- minfi::getRed(geo.rg)      # get red signal matrix
geo.green <- minfi::getGreen(geo.rg)  # get grn signal matrix

Match indices and labels between the GEO and h5 test signal matrices.

int.addr <- intersect(rownames(geo.red), rownames(h5.red)) # get probe address ids
geo.red <- geo.red[int.addr,]                              # subset geo rgset red signal
geo.green <- geo.green[int.addr,]                          # subset gro rgset grn signal
geo.red <- geo.red[order(match(rownames(geo.red), rownames(h5.red))),]
geo.green <- geo.green[order(match(rownames(geo.green), rownames(h5.green))),]
identical(rownames(geo.red), rownames(h5.red))             # check identical addresses, red
identical(rownames(geo.green), rownames(h5.green))         # check identical addresses, grn
class(h5.red) <- "integer"; class(h5.green) <- "integer"   # set matrix data classes to integer

Finally, compare the signal matrix data.

identical(geo.red, h5.red) # compare matrix signals, red
identical(geo.green, h5.green) # compare matrix signals, grn

5.3 Compare DNAm Beta-values

Before comparing the GEO-downloaded data to data from the h5se.test database, normalize the data using the same out-of-band or “noob” normalization technique that was used to generate data in the h5se database.

geo.gr <- minfi::preprocessNoob(geo.rg) # get normalized se data

Next, extract the Beta-values.

geo.bm <- as.matrix(minfi::getBeta(geo.gr)) # get normalized dnam fractions matrix

Now match row and column labels and indices.

h5se.bm <- as.matrix(h5se.bm) # set dnam fractions to matrix
int.cg <- intersect(rownames(geo.bm), rownames(h5se.bm))
geo.bm <- geo.bm[int.cg,]     # subset fractions on shared probe ids
geo.bm <- geo.bm[order(match(rownames(geo.bm), rownames(h5se.bm))),]

Finally, compare the two datasets.

identical(summary(geo.bm), summary(h5se.bm)) # check identical summary values
identical(rownames(geo.bm), rownames(h5se.bm)) # check identical probe ids

6 Troubleshooting and tips

This section describes how to address potential issues with accessing the database files or working with the DelayedArray based objects locally.

6.1 Issue: large file downloads don’t complete

If repeated attempts to download the database compilation files fail, you may try the following:

  • First ensure your internet connection is stable and there is sufficient space at the download destination for the database file.

  • Second, try increasing your timeout duration beyond the default before repeating the download attempt with getdb. Check the current timeout for an R session with getOptions('timeout'), then manually increase the timeout duration with options(timeout = new.time).

  • Finally, you may attempt to download a server file using command line calls to your system terminal or console. For instance, on a Mac you might try wget -r <file_url>. If this doesn’t work, you can again attempt to increase the timeout duration and repeat the download attempt.

6.2 Issue: unexpected function behaviors for DelayedArray inputs

Unexpected function behaviors may arise when using DelayedArray-based inputs. These essentially arise from lacking interoperativity between normal matrices and the DelayedArray-based matrices. Known examples include:

  • minfi::detectionP():

Throws error for specific subsets of data, such as for queries of exactly 50 samples.

detectionP(rg[,1:50]) # get detection pvalues from rgset
"Error in .local(Red, Green, locusNames, controlIdx, TypeI.Red, TypeI.Green, dim(Red_grid) == dim(detP_sink_grid) are not all TRUE"
  • minfi::preprocessFunnorm():

Throws error when called for an RGChannelSet of type HDF5-SummarizedExperiment.

preprocessFunnorm(rg) # get noob-normalized data
"Error: 'preprocessFunnorm()' only supports matrix-backed minfi objects.""

These and other related errors may be addressed by instantiating the data query, or the data chunk, as a new non-DelayedArray object. For example, remake a subset of the full h5se dataset, rg, as follows.

rg.h5se <- loadHDF5SummarizedExperiment(rg.path)        # full h5se RGChannelSet
rg.sub <- rg.h5se[,c(1:20)]                             # subset samples of interest
rg.new <- RGChannelSet(Red = getRed(rg.sub), 
                       Green = getGreen(rg.sub),
                       annotation = annotation(rg.sub)) # re-make as non-DA object
gr <- preprocessFunnorm(rg.new)                         # repeat preprocessing

Alternatively, non-DelayedArray RGChannelSet objects can be readily generated from the full h5 RGChannelSet database with the provided function getrg().

7 Get more help

Consult the Data Analyses vignette and main manuscript for analysis examples and details about data compilations.

8 Session info

sessionInfo()
## R version 4.1.2 (2021-11-01)
## Platform: x86_64-pc-linux-gnu (64-bit)
## Running under: Ubuntu 20.04.4 LTS
## 
## Matrix products: default
## BLAS:   /home/biocbuild/bbs-3.14-bioc/R/lib/libRblas.so
## LAPACK: /home/biocbuild/bbs-3.14-bioc/R/lib/libRlapack.so
## 
## locale:
##  [1] LC_CTYPE=en_US.UTF-8       LC_NUMERIC=C              
##  [3] LC_TIME=en_GB              LC_COLLATE=C              
##  [5] LC_MONETARY=en_US.UTF-8    LC_MESSAGES=en_US.UTF-8   
##  [7] LC_PAPER=en_US.UTF-8       LC_NAME=C                 
##  [9] LC_ADDRESS=C               LC_TELEPHONE=C            
## [11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C       
## 
## attached base packages:
## [1] parallel  stats4    stats     graphics  grDevices utils     datasets 
## [8] methods   base     
## 
## other attached packages:
##  [1] IlluminaHumanMethylation450kanno.ilmn12.hg19_0.6.0
##  [2] ExperimentHub_2.2.1                               
##  [3] AnnotationHub_3.2.2                               
##  [4] BiocFileCache_2.2.1                               
##  [5] dbplyr_2.1.1                                      
##  [6] reticulate_1.24                                   
##  [7] basilisk_1.6.0                                    
##  [8] HDF5Array_1.22.1                                  
##  [9] DelayedArray_0.20.0                               
## [10] Matrix_1.4-0                                      
## [11] limma_3.50.1                                      
## [12] gridExtra_2.3                                     
## [13] ggplot2_3.3.5                                     
## [14] knitr_1.37                                        
## [15] recountmethylation_1.4.5                          
## [16] minfi_1.40.0                                      
## [17] bumphunter_1.36.0                                 
## [18] locfit_1.5-9.5                                    
## [19] iterators_1.0.14                                  
## [20] foreach_1.5.2                                     
## [21] Biostrings_2.62.0                                 
## [22] XVector_0.34.0                                    
## [23] SummarizedExperiment_1.24.0                       
## [24] Biobase_2.54.0                                    
## [25] MatrixGenerics_1.6.0                              
## [26] matrixStats_0.61.0                                
## [27] GenomicRanges_1.46.1                              
## [28] GenomeInfoDb_1.30.1                               
## [29] IRanges_2.28.0                                    
## [30] S4Vectors_0.32.3                                  
## [31] BiocGenerics_0.40.0                               
## [32] rhdf5_2.38.1                                      
## [33] BiocStyle_2.22.0                                  
## 
## loaded via a namespace (and not attached):
##   [1] plyr_1.8.6                    splines_4.1.2                
##   [3] BiocParallel_1.28.3           digest_0.6.29                
##   [5] htmltools_0.5.2               magick_2.7.3                 
##   [7] fansi_1.0.2                   magrittr_2.0.2               
##   [9] memoise_2.0.1                 tzdb_0.2.0                   
##  [11] readr_2.1.2                   annotate_1.72.0              
##  [13] askpass_1.1                   siggenes_1.68.0              
##  [15] prettyunits_1.1.1             colorspace_2.0-3             
##  [17] blob_1.2.2                    rappdirs_0.3.3               
##  [19] xfun_0.30                     dplyr_1.0.8                  
##  [21] crayon_1.5.0                  RCurl_1.98-1.6               
##  [23] jsonlite_1.8.0                genefilter_1.76.0            
##  [25] GEOquery_2.62.2               survival_3.3-1               
##  [27] glue_1.6.2                    gtable_0.3.0                 
##  [29] zlibbioc_1.40.0               Rhdf5lib_1.16.0              
##  [31] scales_1.1.1                  DBI_1.1.2                    
##  [33] rngtools_1.5.2                Rcpp_1.0.8.2                 
##  [35] xtable_1.8-4                  progress_1.2.2               
##  [37] bit_4.0.4                     mclust_5.4.9                 
##  [39] preprocessCore_1.56.0         httr_1.4.2                   
##  [41] dir.expiry_1.2.0              RColorBrewer_1.1-2           
##  [43] ellipsis_0.3.2                farver_2.1.0                 
##  [45] pkgconfig_2.0.3               reshape_0.8.8                
##  [47] XML_3.99-0.9                  sass_0.4.0                   
##  [49] utf8_1.2.2                    later_1.3.0                  
##  [51] labeling_0.4.2                tidyselect_1.1.2             
##  [53] rlang_1.0.2                   AnnotationDbi_1.56.2         
##  [55] BiocVersion_3.14.0            munsell_0.5.0                
##  [57] tools_4.1.2                   cachem_1.0.6                 
##  [59] cli_3.2.0                     generics_0.1.2               
##  [61] RSQLite_2.2.10                evaluate_0.15                
##  [63] stringr_1.4.0                 fastmap_1.1.0                
##  [65] yaml_2.3.5                    bit64_4.0.5                  
##  [67] beanplot_1.2                  scrime_1.3.5                 
##  [69] purrr_0.3.4                   KEGGREST_1.34.0              
##  [71] nlme_3.1-155                  doRNG_1.8.2                  
##  [73] sparseMatrixStats_1.6.0       mime_0.12                    
##  [75] nor1mix_1.3-0                 xml2_1.3.3                   
##  [77] biomaRt_2.50.3                compiler_4.1.2               
##  [79] interactiveDisplayBase_1.32.0 filelock_1.0.2               
##  [81] curl_4.3.2                    png_0.1-7                    
##  [83] tibble_3.1.6                  bslib_0.3.1                  
##  [85] stringi_1.7.6                 basilisk.utils_1.6.0         
##  [87] highr_0.9                     GenomicFeatures_1.46.5       
##  [89] lattice_0.20-45               multtest_2.50.0              
##  [91] vctrs_0.3.8                   pillar_1.7.0                 
##  [93] lifecycle_1.0.1               rhdf5filters_1.6.0           
##  [95] BiocManager_1.30.16           jquerylib_0.1.4              
##  [97] data.table_1.14.2             bitops_1.0-7                 
##  [99] httpuv_1.6.5                  rtracklayer_1.54.0           
## [101] R6_2.5.1                      BiocIO_1.4.0                 
## [103] promises_1.2.0.1              bookdown_0.24                
## [105] codetools_0.2-18              MASS_7.3-55                  
## [107] assertthat_0.2.1              openssl_2.0.0                
## [109] rjson_0.2.21                  withr_2.5.0                  
## [111] GenomicAlignments_1.30.0      Rsamtools_2.10.0             
## [113] GenomeInfoDbData_1.2.7        mgcv_1.8-39                  
## [115] hms_1.1.1                     quadprog_1.5-8               
## [117] grid_4.1.2                    tidyr_1.2.0                  
## [119] base64_2.0                    rmarkdown_2.13               
## [121] DelayedMatrixStats_1.16.0     illuminaio_0.36.0            
## [123] shiny_1.7.1                   restfulr_0.0.13

Works Cited

1. Maden, S. K., Thompson, R. F., Hansen, K. D., and Nellore, A. (2020). Human methylome variation across Infinium 450K data on the Gene Expression Omnibus. bioRxiv. Available at: https://www.biorxiv.org/content/10.1101/2020.11.17.387548v2.

2. Triche, T. J., Weisenberger, D. J., Van Den Berg, D., Laird, P. W., and Siegmund, K. D. (2013). Low-level processing of Illumina Infinium DNA Methylation BeadArrays. Nucleic Acids Research 41, e90.

3. Sandoval, J., Heyn, H. A., Moran, S., Serra-Musach, J., Pujana, M. A., Bibikova, M., and Esteller, M. (2011). Validation of a DNA methylation microarry for 450,000 CpG sites in the human genome. Epigenetics 6, 692–702. Available at: http://www.landesbioscience.com/journals/epigenetics/article/16196/?nocache=1384341162.

4. Pidsley, R., Zotenko, E., Peters, T. J., Lawrence, M. G., Risbridger, G. P., Molloy, P., Van Djik, S., Muhlhausler, B., Stirzaker, C., and Clark, S. J. (2016). Critical evaluation of the Illumina MethylationEPIC BeadChip microarray for whole-genome DNA methylation profiling. Genome Biology 17. Available at: https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5055731/ [Accessed April 19, 2019].