Motif Enrichment Testing using AME

library(memes)
suppressPackageStartupMessages(library(GenomicRanges))
library(magrittr)

Sequence Input

AME requires a series of input sequences to scan for motif enrichment. runAme() accepts sequence input in the following formats:

NOTE XStringSet inputs can be easily generated for DNA sequences from a GRanges object using the get_sequence() function

data("example_peaks", package = "memes")

dm.genome <- BSgenome.Dmelanogaster.UCSC.dm3::BSgenome.Dmelanogaster.UCSC.dm3

sequence <- example_peaks %>% 
  get_sequence(dm.genome)

Database Input

AME scans input sequences against a database of known motifs and tests for enrichment of each motif in the database. runAme() can accept a database in the following formats:

Setting a default database

memes can be configured to use a default .meme format file as the query database, which it will use if the user does not provide a value to database when calling runAme(). The following locations will be searched in order.

  1. The meme_db option, defined using options(meme_db = "path/to/database.meme")
  1. The MEME_DB environment variable defined in .Renviron

NOTE: if an invalid location is found at one option, runAme() will fall back to the next location if valid (eg if the meme_db option is set to an invalid file, but the MEME_DB environment variable is a valid file, the MEME_DB path will be used.

Running AME

runAme() supports running AME using three modes:

AME Mode Description Command
Vs Shuffled Input vs Shuffled Sequence runAme(input = sequence, control = "shuffle")
Discriminative Input vs Control Sequence runAme(input = sequence, control = control)
Partitioning Rank Input by fasta score runAme(input = sequence, control = NA)
ame_vs_shuffle <- runAme(sequence)
ame_vs_control <- runAme(sequence[1:5], sequence[6:10])

To run AME using partitioning mode, the fasta header must contain a score value for each entry in the form: “>entry_name score”. The get_sequences() score argument allows users to set the score value to a column value from input regions.

sequence_scored <- example_peaks %>% 
  plyranges::mutate(score = seq_along(.)) %>% 
  get_sequence(dm.genome, score = "score")

names(sequence_scored)[1]
ame_partition <- runAme(sequence_scored, control = NA)

Running AME on multiple groups

If using a list input to runAme(), it will dispatch multiple AME runs for each object in the list.

Discriminative analysis using list input

If the input to runAme() is a named list of XStringSet objects, control can be set to one or more values from names(input) to use those regions as background. It will skip running those regions as the input. The following code will result in these comparisons:

  1. Increasing vs Static
  2. Decreasing vs Static

If multiple names are used in the control section, they will be combined together to make a single control set which will be used for all comparisons. Here, we use “Static” and “Decreasing” sites as the control, which will result in only running 1 comparison: Increasing vs Static+Decreasing.

Output Format

AME will return different output formats depending on the method used. For detailed information about these values see the AME Output description webpage. As a general rule of thumb, runAme() will return the same column names described in the webpage, except dashes are removed and all column names are lowercase.

ame_by_behavior_vs_static$Decreasing %>% 
  names

If runAme() is run with method = "fisher", the sequences output can be added to the results by setting sequences = TRUE. This will be added as a list column named sequences that can be unnested using tidyr::unnest().

Visualizing Results as Heatmap

The plot_ame_heatmap() function provides a method to easily generate visualizations of AME results.

To plot results from multiple runs together, they must first be joined into 1 data frame. The ame_by_behavior_vs_static object is a list whose names correspond to the E93 response (Increasing or Decreasing). The list can be combined into a data.frame using dplyr::bind_rows. Setting .id = "behavior creates a new column behavior that contains the names from the ame_by_behavior_vs_static list. In this way, the resulting data.frame contains all AME results for each run, which can be distinguished by the behavior column.

ame_by_behavior_vs_static %>% 
  # AME results in list format are easily combined using dplyr::bind_rows
  # .id will specify a column to hold the list object names
  dplyr::bind_rows(.id = "behavior") %>% 
  # setting group to a column name will split the results on the y-axis
  plot_ame_heatmap(group = behavior)

Complex Heatmap Example

There are several nuances when making heatmap visualizations of these data. The following examples highlight some of these issues and provide alternative approaches and solutions.

We start by using different binding site categories as input.

It is possible to aggregate results from multiple runs into a heatmap by setting the group parameter in plot_ame_heatmap().

This is too many hits to properly view in this vignette, but you can see that the heatmap will plot motifs by their overlap across groups, where unique motifs are on the left, and shared motifs are on the right.

Issues with Heatmap Visualization

The dynamic range of p-values in these data varies between groups. For this reason, a simple heatmap scaled using all data values will make it more difficult to interpret within groups with a lower dynamic range of values. In other words, because the dynamic range of values are different between experiments, placing them on the default scale for comparison may not always be the most optimal visualization.

We can partially overcome this limitation by filling the heatmap with the normalized rank value for each TF, which accounts for differences in total number of discovered motifs between AME runs. Although it does not completely abrogate differences, the signal values for high-ranked motifs within groups will be more comparable. However, the normalized rank visualization eliminates all real values related to statistical significance! Instead, this visualization represents the relative ranks of hits within an AME run, which already pass a significance threshold set during runAME(). This means that even if several motifs have similar or even identical p-values, their heatmap representation will be a different color value based on their ranked order in the results list. This tends to only be useful when there are a large number of hits (>=100). Both visualizations can be useful and reveal different properties of the data to the user. If in doubt, prefer the -log10(adj.pvalue) representation.

Below is a comparison of the distribution of values when using -log10(adj.pvalue) (A) vs normalized ranks (B). Because orphan sites tend to have smaller p-values overall, the heatmap scale will be skewed towards the high values in the orphan data, making ectopic and entopic heat values lighter by comparison.

ame_res %>% 
  ame_compare_heatmap_methods(group = binding_type)

To use the normalized rank value, set value = "normalize" in plot_ame_heatmap().

This plot reveals that the motifs which tend to be shared across all 3 categories tend to be higher ranks in the output than the motifs unique to the different categories, which tend to come from lower ranks. This suggests that although there are differences in motif content across the three categories, they may be largely similar in motif makeup. We will investigate this question in more detail in the “Denovo motif similarity” section.

library(ggplot2)

(normalize_heatmap <- ame_res %>% 
  dplyr::group_by(binding_type, motif_alt_id) %>% 
  dplyr::filter(adj.pvalue == min(adj.pvalue)) %>% 
  plot_ame_heatmap(group = binding_type, id = motif_alt_id, value = "normalize") +
    # All ggplot functions can be used to extend or edit the heatmap plots
    ggtitle("value = \"normalize\""))

An additional third option exists to rescale the -log10(adj.pvalue) heatmap to change the heatmap’s maxiumum color value. This allows the user to maintain values which represent significance, but rescale the data to capture the lower end of the dynamic range. Using the cumulative distribution plot above, a reasonable cutoff is anywhere between 7 & 10, which captures > 90% of the data for ectopic and entopic sites.

A comparison of all three methods can be seen below.

pval_heatmap <- ame_res %>% 
  dplyr::group_by(binding_type, motif_alt_id) %>% 
  dplyr::filter(adj.pvalue == min(adj.pvalue)) %>% 
  plot_ame_heatmap(group = binding_type, id = motif_alt_id) +
    ggtitle("value = -log10(adj.pvalue)")

scale_heatmap <- ame_res %>% 
  dplyr::group_by(binding_type, motif_alt_id) %>% 
  dplyr::filter(adj.pvalue == min(adj.pvalue)) %>% 
  plot_ame_heatmap(group = binding_type, id = motif_alt_id, scale_max = 7.5) +
    ggtitle("value = -log10(adj.pvalue) (scale capped at 7.5)")

Below is a comparison using the -log10(adj.pvalue) vs normalize methods for plotting the heatmap. Note how the different plots highlight different data properties. The -log10(adj.pvalue) plot shows overall significance of each hit, while normalize method shows the relative rank of each hit within a binding_type. Lowering the maximum scale value in C) does a better job than A) at visualizing differences in significance along the ectopic and entopic rows at the cost of decreasing the dynamic range of the orphan row. Selecting a visualization for publication will depend heavily on context, but if in doubt, prefer one which includes information of statistical significance as in A) or C).

cowplot::plot_grid(pval_heatmap, 
                   normalize_heatmap, 
                   scale_heatmap, 
                   ncol = 1, labels = "AUTO")

Importing Previous Data

importAme() can be used to import an ame.tsv file from a previous run on the MEME server or on the commandline. Details for how to save data from the AME webserver are below.

Optionally, if AME was run on the commandline with --method fisher, the user can pass a path to the sequences.tsv file to the sequences argument of importAme() to append the sequence information to the AME results.

Saving data from AME Web Server

To download TSV data from the MEME Server, right-click the AME TSV output link and “Save Target As” or “Save Link As” (see example image below), and save as <filename>.tsv. This file can be read using importAme().

saving AME tsv results

saving AME tsv results

Citation

memes is a wrapper for a select few tools from the MEME Suite, which were developed by another group. In addition to citing memes, please cite the MEME Suite tools corresponding to the tools you use.

If you use runAme() in your analysis, please cite:

Robert McLeay and Timothy L. Bailey, “Motif Enrichment Analysis: A unified framework and method evaluation”, BMC Bioinformatics, 11:165, 2010, doi:10.1186/1471-2105-11-165. full text

Licensing Restrictions

The MEME Suite is free for non-profit use, but for-profit users should purchase a license. See the MEME Suite Copyright Page for details.

Session Info

sessionInfo()