Contents

1 About This Vignette

This vignette aims to be a short tutorial for the main functionalities of SIAMCAT. Examples of additional workflows or more detailed tutorials can be found in other vignettes (see the BioConductor page).

SIAMCAT is part of the suite of computational microbiome analysis tools hosted at EMBL by the groups of Peer Bork and Georg Zeller. Find out more at EMBL-microbiome tools.

2 Introduction

Associations between microbiome and host phenotypes are ideally described by quantitative models able to predict host status from microbiome composition. SIAMCAT can do so for data from hundreds of thousands of microbial taxa, gene families, or metabolic pathways over hundreds of samples. SIAMCAT produces graphical output for convenient assessment of the quality of the input data and statistical associations, for model diagnostics and inference revealing the most predictive microbial biomarkers.

3 Quick Start

For this vignette, we use an example dataset included in the SIAMCAT package. As example dataset we use the data from the publication of Zeller et al, which demonstrated the potential of microbial species in fecal samples to distinguish patients with colorectal cancer (CRC) from healthy controls.

library("SIAMCAT")

data("feat_crc_zeller", package="SIAMCAT")
data("meta_crc_zeller", package="SIAMCAT")

First, SIAMCAT needs a feature matrix (can be either a matrix, a data.frame, or a phyloseq-otu_table), which contains values of different features (in rows) for different samples (in columns). For example, the feature matrix included here contains relative abundances for bacterial species calculated with the mOTU profiler for 141 samples:

feat.crc.zeller[1:3, 1:3]
##                                  CCIS27304052ST-3-0 CCIS15794887ST-4-0
## UNMAPPED                                   0.589839          0.7142157
## Methanoculleus marisnigri [h:1]            0.000000          0.0000000
## Methanococcoides burtonii [h:10]           0.000000          0.0000000
##                                  CCIS74726977ST-3-0
## UNMAPPED                                  0.7818674
## Methanoculleus marisnigri [h:1]           0.0000000
## Methanococcoides burtonii [h:10]          0.0000000
dim(feat.crc.zeller)
## [1] 1754  141

Please note that SIAMCAT is supposed to work with relative abundances. Other types of data (e.g. counts) will also work, but not all functions of the package will result in meaningful outputs.

Secondly, we also have metadata about the samples in another data.frame:

head(meta.crc.zeller)
##                    Age BMI Gender AJCC_stage     FOBT Group
## CCIS27304052ST-3-0  52  20      F         -1 Negative   CTR
## CCIS15794887ST-4-0  37  18      F         -1 Negative   CTR
## CCIS74726977ST-3-0  66  24      M         -1 Negative   CTR
## CCIS16561622ST-4-0  54  26      M         -1 Negative   CTR
## CCIS79210440ST-3-0  65  30      M         -1 Positive   CTR
## CCIS82507866ST-3-0  57  24      M         -1 Negative   CTR

In order to tell SIAMCAT, which samples are cancer cases and which are healthy controls, we can construct a label object from the Group column in the metadata.

label.crc.zeller <- create.label(meta=meta.crc.zeller,
    label='Group', case='CRC')
## Label used as case:
##    CRC
## Label used as control:
##    CTR
## + finished create.label.from.metadata in 0.002 s

Now we have all the ingredients to create a SIAMCAT object. Please have a look at the vignette about input formats for more information about supported formats and other ways to create a SIAMCAT object.

sc.obj <- siamcat(feat=feat.crc.zeller,
    label=label.crc.zeller,
    meta=meta.crc.zeller)
## + starting validate.data
## +++ checking overlap between labels and features
## + Keeping labels of 141 sample(s).
## +++ checking sample number per class
## +++ checking overlap between samples and metadata
## + finished validate.data in 0.028 s

A few information about the SIAMCAT object can be accessed with the show function from phyloseq (SIAMCAT builds on the phyloseq data structure):

show(sc.obj)
## siamcat-class object
## label()                Label object:         88 CTR and 53 CRC samples
## 
## contains phyloseq-class experiment-level object @phyloseq:
## phyloseq@otu_table()   OTU Table:            [ 1754 taxa and 141 samples ]
## phyloseq@sam_data()    Sample Data:          [ 141 samples by 6 sample variables ]

Since we have quite a lot of microbial species in the dataset at the moment, we can perform unsupervised feature selection using the function filter.features.

sc.obj <- filter.features(sc.obj,
    filter.method = 'abundance',
    cutoff = 0.001)
## Features successfully filtered

4 Association Testing

Associations between microbial species and the label can be tested with the check.associations function. The function computes for each species the significance using a non-parametric Wilcoxon test and different effect sizes for the association (e.g. AUC or fold change).

sc.obj <- check.associations(
    sc.obj,
    sort.by = 'fc',
    alpha = 0.05,
    mult.corr = "fdr",
    detect.lim = 10 ^-6,
    plot.type = "quantile.box",
    panels = c("fc", "prevalence", "auroc"))

The function produces a pdf file as output, since the plot is optimized for a landscape DIN-A4 layout, but can also used to plot on an active graphic device, e.g. in RStudio. The resulting plot then looks like that: Association Plot

5 Confounder Testing

As many biological and technical factors beyond the primary phenotype of interest can influence microbiome composition, simple association studies may suffer confounding by other variables, which can lead to spurious results. The check.confounders function provides the option to test the associated metadata variables for potential confounding influence. No information is stored in the SIAMCAT object, but the different analyses are visualized and saved to a combined pdf file for qualitative interpretation.

sc.obj <- check.confounders(
    sc.obj,
    fn.plot = 'confounder_plots.pdf',
    meta.in = NULL,
    feature.type = 'filtered'
)

The conditional entropy check primarily serves to remove nonsensical variables from subsequent checks. Conditional entropy quantifies the unique information contained in one variable (row) respective to another (column). Identical variables and derived variables which share the exact same information will have a value of zero. In this example, the label was derived from the Group variable which was determined from AJCC stage, so both are excluded.

Conditional Entropy Plot

Conditional Entropy Plot

To better quantify potential confounding effects of metadata variables on individual microbial features, check.confounder plots the variance explained by the label in comparison with the variance explained by the metadata variable for each individual feature. Variables with many features in the upper left corner might be confounding the label associations.

Variance Explained Plot

Variance Explained Plot

6 Model Building

One strength of SIAMCAT is the versatile but easy-to-use interface for the construction of machine learning models on the basis of microbial species. SIAMCAT contains functions for data normalization, splitting the data into cross-validation folds, training the model, and making predictions based on cross-validation instances and the trained models.

6.1 Data Normalization

Data normalization is performed with the normalize.features function. Here, we use the log.unit method, but several other methods and customization options are available (please check the documentation).

sc.obj <- normalize.features(
    sc.obj,
    norm.method = "log.unit",
    norm.param = list(
        log.n0 = 1e-06,
        n.p = 2,
        norm.margin = 1
    )
)
## Features normalized successfully.

6.2 Prepare Cross-Validation

Preparation of the cross-validation fold is a crucial step in machine learning. SIAMCAT greatly simplifies the set-up of cross-validation schemes, including stratification of samples or keeping samples inseperable based on metadata. For this small example, we choose a twice-repeated 5-fold cross-validation scheme. The data-split will be saved in the data_split slot of the SIAMCAT object.

sc.obj <-  create.data.split(
    sc.obj,
    num.folds = 5,
    num.resample = 2
)
## Features splitted for cross-validation successfully.

6.3 Model Training

The actual model training is performed using the function train.model. Again, multiple options for customization are available, ranging from the machine learning method to the measure for model selection or customizable parameter set for hyperparameter tuning.

sc.obj <- train.model(
    sc.obj,
    method = "lasso"
)

The models are saved in the model_list slot of the SIAMCAT object. The model building is performed using the mlr R package. All models can easily be accessed.

# get information about the model type
model_type(sc.obj)
## [1] "lasso"
# access the models
models <- models(sc.obj)
models[[1]]
## Model for learner.id=classif.cvglmnet; learner.class=classif.cvglmnet
## Trained on: task.id = data; obs = 112; features = 207
## Hyperparameters: nlambda=100,alpha=1

6.4 Make Predictions

Using the data-split and the models trained in previous step, we can use the function make.predictions in order to apply the models on the test instances in the data-split. The predictions will be saved in the pred_matrix slot of the SIAMCAT object.

sc.obj <- make.predictions(sc.obj)
pred_matrix <- pred_matrix(sc.obj)
head(pred_matrix)
##                       CV_rep1    CV_rep2
## CCIS27304052ST-3-0 0.06133438 0.04734542
## CCIS15794887ST-4-0 0.18626645 0.05338549
## CCIS74726977ST-3-0 0.29836857 0.50019920
## CCIS16561622ST-4-0 0.58237940 0.59731029
## CCIS79210440ST-3-0 0.26647927 0.21802187
## CCIS82507866ST-3-0 0.12706887 0.11028804

7 Model Evaluation and Interpretation

In the final part, we want to find out how well the model performed and which microbial species had been selected in the model. In order to do so, we first calculate how well the predictions fit the real data using the function evaluate.predictions. This function calculates the Area Under the Receiver Operating Characteristic (ROC) Curve (AU-ROC) and the Precision Recall (PR) Curve for each resampled cross-validation run.

sc.obj <-  evaluate.predictions(sc.obj)
## Evaluated predictions successfully.

7.1 Evaluation Plot

To plot the results of the evaluation, we can use the function model.evaluation.plot, which produces a pdf-file showing the ROC and PR Curves for the different resamples runs as well as the mean ROC and PR Curve.

model.evaluation.plot(sc.obj)

7.2 Interpretation Plot

The final plot produced by SIAMCAT is the model interpretation plot, created by the model.interpretation.plot function. The plot shows for the top selected features the

  • model weights (and how robust they are) as a barplot,

  • a heatmap with the z-scores or fold changes for the top selected features, and

  • a boxplot showing the proportions of weight per model which is captured by the top selected features.

Additionally, the distribution of metadata is shown in a heatmap below.

The function again produces a pdf-file optimized for a landscape DIN-A4 plotting region.

model.interpretation.plot(
    sc.obj,
    fn.plot = 'interpretation.pdf',
    consens.thres = 0.5,
    limits = c(-3, 3),
    heatmap.type = 'zscore',
)

The resulting plot looks like this: Model Interpretation Plot

8 Session Info

sessionInfo()
## R version 4.1.1 (2021-08-10)
## Platform: x86_64-pc-linux-gnu (64-bit)
## Running under: Ubuntu 20.04.3 LTS
## 
## Matrix products: default
## BLAS:   /home/biocbuild/bbs-3.14-bioc/R/lib/libRblas.so
## LAPACK: /home/biocbuild/bbs-3.14-bioc/R/lib/libRlapack.so
## 
## locale:
##  [1] LC_CTYPE=en_US.UTF-8       LC_NUMERIC=C              
##  [3] LC_TIME=en_GB              LC_COLLATE=C              
##  [5] LC_MONETARY=en_US.UTF-8    LC_MESSAGES=en_US.UTF-8   
##  [7] LC_PAPER=en_US.UTF-8       LC_NAME=C                 
##  [9] LC_ADDRESS=C               LC_TELEPHONE=C            
## [11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C       
## 
## attached base packages:
## [1] stats     graphics  grDevices utils     datasets  methods   base     
## 
## other attached packages:
##  [1] ggpubr_0.4.0      SIAMCAT_1.14.0    phyloseq_1.38.0   mlr_2.19.0       
##  [5] ParamHelpers_1.14 forcats_0.5.1     stringr_1.4.0     dplyr_1.0.7      
##  [9] purrr_0.3.4       readr_2.0.2       tidyr_1.1.4       tibble_3.1.5     
## [13] ggplot2_3.3.5     tidyverse_1.3.1   BiocStyle_2.22.0 
## 
## loaded via a namespace (and not attached):
##   [1] readxl_1.3.1           backports_1.2.1        fastmatch_1.1-3       
##   [4] corrplot_0.90          plyr_1.8.6             igraph_1.2.7          
##   [7] splines_4.1.1          GenomeInfoDb_1.30.0    gridBase_0.4-7        
##  [10] digest_0.6.28          foreach_1.5.1          htmltools_0.5.2       
##  [13] magick_2.7.3           fansi_0.5.0            magrittr_2.0.1        
##  [16] checkmate_2.0.0        BBmisc_1.11            cluster_2.1.2         
##  [19] tzdb_0.1.2             openxlsx_4.2.4         Biostrings_2.62.0     
##  [22] modelr_0.1.8           matrixStats_0.61.0     vroom_1.5.5           
##  [25] prettyunits_1.1.1      colorspace_2.0-2       rvest_1.0.2           
##  [28] haven_2.4.3            xfun_0.27              crayon_1.4.1          
##  [31] RCurl_1.98-1.5         jsonlite_1.7.2         survival_3.2-13       
##  [34] iterators_1.0.13       ape_5.5                glue_1.4.2            
##  [37] gtable_0.3.0           zlibbioc_1.40.0        XVector_0.34.0        
##  [40] car_3.0-11             Rhdf5lib_1.16.0        shape_1.4.6           
##  [43] BiocGenerics_0.40.0    abind_1.4-5            scales_1.1.1          
##  [46] infotheo_1.2.0         DBI_1.1.1              rstatix_0.7.0         
##  [49] Rcpp_1.0.7             progress_1.2.2         foreign_0.8-81        
##  [52] bit_4.0.4              stats4_4.1.1           glmnet_4.1-2          
##  [55] httr_1.4.2             RColorBrewer_1.1-2     ellipsis_0.3.2        
##  [58] XML_3.99-0.8           pkgconfig_2.0.3        farver_2.1.0          
##  [61] sass_0.4.0             dbplyr_2.1.1           utf8_1.2.2            
##  [64] labeling_0.4.2         tidyselect_1.1.1       rlang_0.4.12          
##  [67] reshape2_1.4.4         PRROC_1.3.1            munsell_0.5.0         
##  [70] cellranger_1.1.0       tools_4.1.1            cli_3.0.1             
##  [73] generics_0.1.1         ade4_1.7-18            broom_0.7.9           
##  [76] evaluate_0.14          biomformat_1.22.0      fastmap_1.1.0         
##  [79] yaml_2.2.1             knitr_1.36             bit64_4.0.5           
##  [82] fs_1.5.0               zip_2.2.0              beanplot_1.2          
##  [85] nlme_3.1-153           xml2_1.3.2             compiler_4.1.1        
##  [88] rstudioapi_0.13        curl_4.3.2             ggsignif_0.6.3        
##  [91] reprex_2.0.1           bslib_0.3.1            stringi_1.7.5         
##  [94] highr_0.9              lattice_0.20-45        Matrix_1.3-4          
##  [97] vegan_2.5-7            permute_0.9-5          multtest_2.50.0       
## [100] vctrs_0.3.8            pillar_1.6.4           lifecycle_1.0.1       
## [103] rhdf5filters_1.6.0     BiocManager_1.30.16    jquerylib_0.1.4       
## [106] LiblineaR_2.10-12      data.table_1.14.2      bitops_1.0-7          
## [109] R6_2.5.1               bookdown_0.24          gridExtra_2.3         
## [112] rio_0.5.27             IRanges_2.28.0         codetools_0.2-18      
## [115] MASS_7.3-54            assertthat_0.2.1       rhdf5_2.38.0          
## [118] withr_2.4.2            S4Vectors_0.32.0       GenomeInfoDbData_1.2.7
## [121] mgcv_1.8-38            parallel_4.1.1         hms_1.1.1             
## [124] grid_4.1.1             rmarkdown_2.11         carData_3.0-4         
## [127] parallelMap_1.5.1      pROC_1.18.0            Biobase_2.54.0        
## [130] lubridate_1.8.0